Extract Homebrew Beer Recipes | Page 201 | Browse 30,000+ at Brewer's Friend

Author:

Kruk Brewing

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.081

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/10/2014 10:13 PM

Notes: LME should be Rye Extract from Breiss, not plain light LME.

The 10g Cascade leaf addition is just some that I had leftover...substitute with pellets if you want, to get about 5.5 IBU.

Spike the beer with some shine, if you like, to up the ABV. Any grain neutral spirit will do, as well.

This is a nice session rye pale ale when not spiked - easy to make and easy to drink.

Shine can be increased up to 10oz if you like. Or more :) Taste as you go!

Author:

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.095

Efficiency: 50

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/13/2017 7:25 PM

Notes:

Author:

bigtallbry

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.052

Efficiency: 15

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 75 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/29/2015 12:33 AM

Notes: Used a clarifier tablet - Whirlfloc

Author:

caribbeanbrewing

Boil Size: 1 Gallons

Boil Time: 60

Boil Gravity: 1.05

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/25/2015 4:04 PM

Notes:

Author:

dannistan

Boil Size: 5 Litres

Boil Time: 60

Boil Gravity: 1.084

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 17 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/20/2015 3:21 AM

Notes: Have not attempted this yet, just brainstorming how i would make a 'sazerac' beer.

Author:

blanch

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.1

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 69 ° F

Priming Method: corn sugar

Priming Amount: 3/4 cup

Creation Date: 9/24/2015 3:24 AM

Notes: This beer is made with Malt extract that has been blended with crystal malt to be used without steeping grains. Its called red malt extract, and is available thru Williams brewing .com, in six or eight pound bags. They have others too,already blended so the specialty malts are already in the LME !!! Save time...Saves money...More Beer !!!!! my next brew, sometime before the end of September.

Author:

Lindberg Jonathan

Boil Size: 2.5 Gallons

Boil Time: 60

Boil Gravity: 1.149

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 75 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/14/2015 2:49 AM

Notes: On Thursday, October 8th, we used a beer kit called "Island Hopper" from Midwest Brewers to fashion a Holiday Ale. We used the supplied LME and hops (in reduced amount), and purchased new yeast (Safbrew T-58 and spices).

Cooled in sink using 2 bags of ice. I didn't record the cooling time, but it did not seem more than a half hour or so.

We poured the entire contents of the kettle into the carboy, using a strainer to pick up the largest debris, which worked very well.

Author:

Basshook Brewery

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.086

Efficiency: 85

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: Priming sugar

Priming Amount: 5 oz

Creation Date: 11/28/2017 2:49 PM

Notes:

Author:

Antmuzic

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.75

Primary Temp: 68 ° F

Priming Method: Corn Sugar

Priming Amount: 2.5

Creation Date: 3/11/2017 8:43 PM

Notes: This was designed (that may be a strong word) to use up the extra fermentables in the Rat Bastard grain bed and most of our leftover loose hops.

Author:

Jan Erik Johansen

Boil Size: 3 Litres

Boil Time: 30

Boil Gravity: 1.29

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 21 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/28/2016 8:54 AM

Notes: Sift out the shredded ginger and lime zest before adding cold water. Add lime juice to primary after approx. 7 days.

Author:

japa2121

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.106

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/21/2016 12:32 AM

Notes:

Author:

okiemurse

Boil Size: 5.5 Gallons

Boil Time: 60

Boil Gravity: 1.046

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 70 ° F

Priming Method: priming sugar

Priming Amount: 5 oz

Creation Date: 5/12/2016 6:08 PM

Notes: Official NORTHERN BREWER Instructional Document
The perfect pint after a hard day’s work, Gaarden Hoe is
an ode to the historic and refreshing Belgian wit. Classic
wheat is expertly tilled into a traditional pilsner malt bill
and modest, grounded hop profile. Coriander and bitter
orange peel offer slightly tart and citrusy undertones to
quench even the most parched palate.
O.G: 1.049 READY: 6 WEEKS
1–2 weeks primary, 2 weeks secondary,
1–2 weeks bottle conditioning
KIT INVENTORY:
MAILLARD MALTSTM
EXTRACTS & OTHER FERMENTABLES
- 4 lbs Wheat DME (60 min addition)
- 2 lbs Pilsen DME (15 min late addition)
HOPTIMUS REXTM
PREMIUM HOPS
& OTHER FLAVORINGS
- 1 oz Saaz (60 min)
- 1 oz Saaz (15 min)
- 1 oz Bitter Orange Peel (5 min)
- 1 oz Coriander (5 min)
** 6-8# frozen strawberries (secondary)
** strawberry extract (secondary, to taste)
YEAST
- DRY YEAST (DEFAULT): Fermentis Safbrew T-58. Optimum
temp: 59 - 75F.
- LIQUID YEAST OPTION (RECOMMENDED): Wyeast
3944 Belgian Wit. Optimum temp: 62-75F. White Labs WLP400
Belgian Wit Ale. Optimum temp: 67-74F
PRIMING SUGAR
- 5 oz Priming Sugar (save for Bottling Day)
These simple instructions are basic brewing procedures
for this Northern Brewer extract beer kit; please refer
to your starter kit instructions for specific instructions
on use of equipment and common procedures such as
siphoning, sanitizing, bottling, etc.
For more detailed extract brewing instructions, please
visit www.northernbrewer.com
BEFORE YOU BEGIN ...
MINIMUM REQUIREMENTS
- Homebrewing starter kit for brewing 5 gallon batches
- Boiling kettle of at least 3.5 gallons capacity
- A 5 gallon glass carboy, with bung and airlock, to use as a
secondary fermenter
- Approximately two cases of either 12 oz or 22 oz pry-off
style beer bottles
UNPACK THE KIT
- Refrigerate the yeast upon arrival
- Locate the Kit Inventory (above) – this is the recipe for your
beer, so keep it handy
- Doublecheck the box contents vs. the Kit Inventory
- Contact us immediately if you have any
questions or concerns!
PROCEDURE
A FEW DAYS BEFORE BREWING DAY
1. Remove the liquid Wyeast pack from the refrigerator,
and “smack” as shown on the back of the yeast package.
Leave it in a warm place (70–80° F) to incubate until the
pack begins to inflate. Allow at least 3 hours for inflation;
some packs may take up to several days to show inflation.
Do not brew with inactive yeast — we can replace the
yeast, but not a batch that fails to ferment properly. If
you are using dry yeast, no action is needed.
ON BREWING DAY
2. Collect and heat 2.5 gallons of water.
3. Bring to a boil and add 4 lbs Wheat DME. Remove the
kettle from the burner and stir in the Wheat DME.
4. Return wort to boil. The mixture is now called “wort”,
the brewer’s term for unfermented beer.
- Add 1 oz Saaz hops, and boil for 60 minutes.
- Add 2 lbs Pilsen DME and 1 oz Saaz 15 minutes before the
end of the boil.
- Add 1 oz Coriander and 1 oz Bitter Orange Peel 5 minutes
before the end of the boil. You may crush the seeds before
adding if you wish.
5. Cool the wort. When the 60-minute boil is finished,
cool the wort to approximately 100° F as rapidly as
possible. Use a wort chiller, or put the kettle in an ice
bath in your sink.
6. Sanitize fermenting equipment and yeast pack. While
the wort cools, sanitize the fermenting equipment –
fermenter, lid or stopper, fermentation lock, funnel, etc –
along with the yeast pack and a pair of scissors.
7. Fill primary fermenter with 2 gallons of cold water,
then pour in the cooled wort. Leave any thick sludge in
the bottom of the kettle.
8. Add more cold water as needed to bring the
volume to 5 gallons.
9. Aerate the wort. Seal the fermenter and rock back
and forth to splash for a few minutes, or use an aeration
system and diffusion stone.
10. OPTIONAL: if you have our Mad Brewer Upgrade or
Gravity Testing kits, measure specific gravity of the wort
with a hydrometer and record.
11. Add yeast once the temperature of the wort is 78°F or
lower (not warm to the touch). Use the sanitized scissors
to cut off a corner of the yeast pack, and carefully pour
the yeast into the primary fermenter.
12. Seal the fermenter. Add approximately 1 tablespoon of
water to the sanitized fermentation lock. Insert the lock
into rubber stopper or lid, and seal the fermenter.
13. Move the fermenter to a warm, dark, quiet spot until
fermentation begins.
GAARDEN HOE
BEYOND BREWING DAY, WEEKS 1–2
14. Active fermentation begins. Within approximately
48 hours of Brewing Day, active fermentation will
begin – there will be a cap of foam on the surface of
the beer, and you may see bubbles come through the
fermentation lock.
15. Active fermentation ends. Approximately 1–2 weeks
after brewing day, active fermentation will end: the cap
of foam falls back into the new beer, bubbling in the
fermentation lock slows down or stops.
16. Transfer beer to secondary fermenter. Sanitize
siphoning equipment and an airlock and carboy bung or
stopper. Siphon the beer from the primary fermenter into
the secondary.
BEYOND BREWING DAY—
SECONDARY FERMENTATION
17. Secondary fermentation. Allow the beer to condition in
the secondary fermenter for 2 weeks before proceeding
with the next step. Timing now is somewhat flexible.
BOTTLING DAY—ABOUT 4 WEEKS
AFTER BREWING DAY
18. Sanitize siphoning and bottling equipment.
19. Mix a priming solution (a measured amount of sugar
dissolved in water to carbonate the bottled beer) of 2/3
cup priming sugar in 16 oz water. Bring the solution to a
boil and pour into the bottling bucket.
20. Siphon beer into bottling bucket and mix with priming
solution. Stir gently to mix—don’t splash.
21. Fill and cap bottles.
1–2 WEEKS AFTER BOTTLING DAY
22. Condition bottles at room temperature for 1–2 weeks.
After this point, the bottles can be stored cool or cold.
23. Serving. Pour into a clean glass, being careful to leave
the layer of sediment at the bottom of the bottle. Cheers!

Author:

bowlersp

Boil Size: 2.5 Gallons

Boil Time: 60

Boil Gravity: 1.084

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/23/2015 4:12 PM

Notes:

Author:

Jarrod

Boil Size: 3.5 Gallons

Boil Time: 60

Boil Gravity: 1.085

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 60 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/5/2016 9:13 PM

Notes:

Author:

RyDog

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.075

Efficiency: 100

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/6/2015 5:59 AM

Notes: 3 weeks in fermenter
Unfortunately it barely carbonated, it came out quite sweet.

Author:

LaOnda70

Boil Size: 4 Litres

Boil Time: 30

Boil Gravity: 1.31

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 18 ° C

Priming Method: Table sugar

Priming Amount: 102.8

Creation Date: 5/8/2014 7:55 PM

Notes:

Author:

Sam Kornstein

Boil Size: 3 Gallons

Boil Time: 90

Boil Gravity: 1.089

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: Dextrose

Priming Amount: 4oz

Creation Date: 2/26/2017 5:13 PM

Notes: Steep grains in 2.5 gallons of 140 degree water
Gradually raise temperature to 170 degrees over 1 hour.
Bring to boil and add malt extract
Add finely ground cocoa beans and coffee
Add 0.75 oz Target 15% AAU hops (@90 min)
Add 0.5 oz Styrian Goldings 5% AAU hops (@15 min)
Add 0.5 oz Williamette 4.9% AAU hops (@15 min)
Cool wort to 70 degrees and add 3 gallons of cold water
Pitch White Labs British Ale Yeast

Author:

nurse02

Boil Size: 21 Litres

Boil Time: 60

Boil Gravity: 1.05

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/9/2015 6:56 AM

Notes:

Author:

GrungeBob

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.125

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/21/2015 9:33 PM

Notes:

Author:

Shovelhead Jeff

Boil Size: 2.5 Gallons

Boil Time: 60

Boil Gravity: 1.151

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/17/2014 2:15 AM

Notes: