Extract Homebrew Beer Recipes | Page 47 | Browse 30,000+ at Brewer's Friend

Author:

Sluggo

Boil Size: 5 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 25

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 72 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/19/2013 8:06 PM

Notes: • 4oz Roasted Cocoa Beans will be added to secondary fermenter a la dry hopping.

• 1oz Belgian Cocoa Powder will be dissolved in .5 cup boiling water, cooled and added along with 1oz Hazelnut Extract at bottling.

Author:

Boil Size: 5 Gallons

Boil Time: 60

Boil Gravity: 1.067

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/15/2016 1:38 AM

Notes:

Author:

shabadoo75

Boil Size: 11.4 Litres

Boil Time: 60

Boil Gravity: 1.049

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 17.5 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/26/2015 10:58 AM

Notes: Based on a Castelain Blond Biere De Garde clone. But substituted norther brewer and East Kent Goldings for brewers gold, saaz for Tettnanger and German Hallertau Hersbrucker, then Safale T-58 for Wyeast 1338.

That's what you get for leaving it to the last minute!

Author:

PicoBrewer30

Boil Size: 2.5 Gallons

Boil Time: 30

Boil Gravity: 1.247

Efficiency: 72

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.5

Primary Temp: 78 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/13/2016 10:58 PM

Notes: This brew is an iteration of a few ciders using different grain bills (juice to honey ratios) with various yeasts.

Notes:
5lbs = 5 Gal. Apple Juice (if this is your first cider, use organic juice without potassium sorbate; it will kill the yeast and not ferment). Don't think I used maltodextrin here.

The rest of the grain bill is accurate. If a little less kick is needed, try one of the alternates below. I'm using WLP001 this time because of its tolerance for high alcohol, higher fermenting temp and because it finishes sweater (personally I prefer the dryness of the EC-1118 but then it's closer to Cyser territory).

I'm thinking ABV should be close to 10%. Also, because OG will be relatively high I'm using a starter. One could also double pitch with decent results. I've pitched one yeast pack before and still not had any problems.

Basic steps: Boil 2 gal. apple juice and add honey stirring constantly. (Honey is heavy and will sink to the bottom. It burns easily like candi syrup.) Boil juice, honey and sugar together for at least 20 minutes. Combine wort with remaining juice once temps drop to pitching levels.

HISTORIC
YEAST / OG / FG
WLP775 / 1.073 / 1.012 -5 gal. juice to 3 lbs honey
WLP005 / 1.087 / 1.030 -6 gal. juice to 6 lbs honey(4 gal. split)
EC-1118 / 1.087 / 1.011 -6 gal. juice to 6 lbs honey (2 gal. split)

Author:

Rogerio DaSilva

Boil Size: 2.5 Gallons

Boil Time: 60

Boil Gravity: 1.105

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.75

Primary Temp: 68 ° F

Priming Method: Force carbonation

Priming Amount: 22 psi

Creation Date: 6/5/2017 10:20 PM

Notes: 1. Collect and heat 2.5L of water
2. Steep the grains (2-row barley + wheat) in a bag for 1 hour @ 150F / sparge with hot water
3. Bring to boil and add 3.3 lbs Briess Munich Malt syrup; add 1lb of DME light @ 45 minutes - boil for 60 minutes
4. Add the hops: 1 oz Hallertau @ 60min; 0.5oz of Hallertau @ 10min; 0.5 Willamette @ 0min.
5. When the 60-minute boil is finished, cool the wort to approximately 100° F as rapidly as possible. Use a wort chiller
6. While the wort cools, sanitize the fermenting equipment - fermenter, lid or stopper, fermentation lock, funnel, etc – along with the yeast pack and a pair of scissors.
7. Fill primary fermenter with 2 gallons of cold water, then pour in the cooled wort. Leave any thick sludge in the bottom of the kettle.
8. Add more cold water as needed to bring the volume to 5 gallons.
9. Aerate the wort with O2 for 30 seconds
10. Measure SG of the wort with a hydrometer and record.
11. Add yeast once the temperature of the wort is 78°F or lower (not warm to the touch). Work earlier to prepare an yeast starter (2 days before)
12. Insert an airlock into rubber stopper or lid, and seal the fermenter.
13. Move the fermenter to a warm, dark, quiet spot until
fermentation begins.
14. Fermentation time: 1–2 weeks primary, 2–4 weeks secondary
15. When kegging add 3oz of Blueberry flavor
16. Force carbonate with C)2 following the recommendations

Author:

seankelly789

Boil Size: 2 Litres

Boil Time: 60

Boil Gravity: 1.216

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 18 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/12/2016 4:11 AM

Notes:

Author:

brewfromthecave

Boil Size: 5 Gallons

Boil Time: 60

Boil Gravity: 1.091

Efficiency: 50

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/27/2016 6:10 PM

Notes: http://www.homebrewersassociation.org/homebrew-recipe/kentucky-breakfast-stout/

Author:

Boil Size: 3 Gallons

Boil Time: N/A

Boil Gravity: 1.085

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/1/2022 9:38 PM

Notes: from https://brewtogether.com/2019/10/05/homebrewed-cider/:

-Add the 4 gallons of pasteurized apple cider or juice and 2 containers of the guava nectar to a sanitized carboy.
Pitch the yeast according to the instructions on the packet.
Ferment for approximately 21 days. Fermentation will be rapid for a few days and then slow for a couple of weeks. Ferment completely dry.

-Once fermentation has stopped and you have taken a gravity reading to make sure it’s done, you’re ready to keg the cider (if you don’t keg, jump down a few paragraphs to the bottling instructions).

-Rack from carboy into cleaned/sanitized keg.

-Add 1/4 tsp to 1/2 tsp of Potassium Metabisilfite to the keg. Purge the headspace from the keg with Co2 and cold crash.

-Wait 24 hours.

-After 24 hours, add 2.5 tsp of Potassium Sorbate. You need to wait the 24 hours so that you have some sulfite in the cider before you add the sorbates or you will end up with some off flavors. Purge the headspace in the keg a couple of times with Co2 and cold crash.

-Wait 3 days.

-After 3 days, backsweeten with 1-2 containers of thawed frozen apple juice concentrate (to taste) and 2 containers of the Goya Guava Nectar.

-Seal and purge the airspace in the keg, then put it under pressure to begin carbonation. I just carbonated it slowly at about 10-12 psi, which worked perfectly for it.

-It’s drinkable pretty much immediately, but if you can wait 3-4 weeks it will improve substantially in flavor. You may have sediment settle at the bottom of your keg. If you find the first pint is a slushy ugly pink mess, pull another pint or two before worrying too much – I had to pull about 20 oz before it got to the good stuff.

-Enjoy

Author:

Jim_in_Oregon

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/24/2011 3:18 AM

Notes:

Author:

estepelton

Boil Size: 6 Gallons

Boil Time: 60

Boil Gravity: 1.044

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.75

Primary Temp: 69 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/27/2018 10:16 PM

Notes:

Author:

Tylor Miranda

Boil Size: 5.7 Gallons

Boil Time: 30

Boil Gravity: 1.073

Efficiency: 80

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 75 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/3/2020 12:31 AM

Notes: This oatmeal stout is fermented with extremely clean yeast providing a true expression of the malt and hops characteristics.

The malt extract is a blend of pale malt with some caramel 60, Munich, and black malt. It creates a dark wort with a smooth taste and at the high rate of addition in this beer, the caramel, honey, bread, coffee, chocolate, and toasty flavors boldly fill the palate.

The addition of oatmeal flour gives a rich, smooth mouthfeel and full body to the beer.

The Minnesota grown Mighty Axe Sterling hops infuse a delicately spicy, citrusy aroma with a floral and herbal nuance. The high oil content allows the hops flavor to last through the finish without over-riding the malt and oatmeal character of this wonderful porter.

Extract brewing can be simple and rewarding! Note that while the equipment costs far less than the equivalent all-grain systems, the cost to let someone else create your extract over extracting the sugars from grains yourself is more expensive by about 20-50%. The cost per 20oz (one bottle) of beer for this brew comes to just over $2.12.

For a fermentation airlock, run a section of the 3/8" ID Siphon Hose from the grommet on the lid to the bottom of one of the gallon jugs filled with sanitizer solution in tap water, and place the gallon jug and the fermentation bucket at the same height.

The recommended inoculation rate of this yeast is 2 grams per 5 gallons, or approximately 1/2 tsp. The yeast packet comes with 11 grams. The maximum pitch rate is 4g/5gal.

Primary fermentation ambient temperature can be anywhere in the yeast's fermentation temperature range, so fermenting warmer at around 75f will speed up the fermentation process, but the beer should not get warmer than 76f. If the fermenting liquid gets warmer than 76f, place the beer is a cooler (and still dark) area such as a basement or cooled fermentation chamber.

To bottle your beer, precondition each sanitized bottle with 2 Northern Brewer Fizz Drops. Attach a 5-8 foot section of the 3/8" ID Siphon Hose to the Fermenter's Favorites Bottling Spigot and the other end of the hose to the Fermenter's Favorites® Spring Tip Bottle Filler. Slowly open the spigot until it is fully open. Place the spring tip filler into the bottle and press the tip in on the bottom of the bottle. Fill the bottle until the liquid reaches the top. Remove the filler and the bottle will be filled to the optimal height.

Secondary fermentation in bottles takes between 14 and 21 days. 17.5 is usually a safe number of days to allow carbonation to build.

Do not be lead astray by the math provided by this recipe. Final gravity is likely to be much lower, and the ABV of this beer is likely to be higher due to the extremely high alcohol tolerance of this yeast.

Don't forget to sanitize everything including the outside rims of the brew equipment and even the outside of the yeast packet.

Author:

DadDog08

Boil Size: 1 Gallons

Boil Time: N/A

Boil Gravity: 1.1

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/19/2015 1:00 AM

Notes: Rehydrate EC-1118 in 1/2 cup 105F water
Heat 35oz. water with 35oz. honey to 110F dissolve honey.
Add honey water, 64oz. apple juice, and 1/4tsp Pumpkin Pie Spice to primary.
Check temp. and pitch yeast.
Shake like hell to aerate.
Fill gallon jug with water and leave head space.
OG 1.106

Author:

John C. Smith

Boil Size: 2.5 Gallons

Boil Time: 60

Boil Gravity: 1.08

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 69 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/11/2018 12:32 PM

Notes: Sour cherries were frozen, then thawed and pitted, and then frozen and thawed again before adding to the secondary. Added 1/8 tsp liquid pectic enzyme (several years old, so maybe no good) at the time to help clear haze. Lots of secondary fermentation from the cherries and juice. Also added 1 tsp gelatin (softened in 1/4 c cold water) finings. Still some haze before bottling, so added 1/4 tsp powdered pectic enzyme. Bottled with 2.6 oz. corn sugar.

Final gravity 1.003! ABV 8.3%

Author:

Ranch Dog

Boil Size: 2.5 Gallons

Boil Time: 60

Boil Gravity: 1.06

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 63 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/16/2015 7:31 PM

Notes:

Author:

normangeaney@gmail.com

Boil Size: 5.25 Litres

Boil Time: 60

Boil Gravity: N/A

Efficiency: 25

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/7/2012 10:01 PM

Notes:

Author:

Boil Size: 2 Gallons

Boil Time: 90

Boil Gravity: 1.033

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/24/2015 1:52 AM

Notes:

Author:

jmetzger

Boil Size: 4.5 Gallons

Boil Time: 60

Boil Gravity: 1.057

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.5

Primary Temp: 61 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/7/2014 8:43 PM

Notes:

Author:

bilhelm96

Boil Size: 6.75 Gallons

Boil Time: 60

Boil Gravity: 1.078

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 1.0

Primary Temp: 68 ° F

Priming Method: 2.2 vol

Priming Amount: N/A

Creation Date: 10/4/2012 5:31 PM

Notes: Bourbon barrel barleywine similar to Weyerbacher Insanity

Steep grains in 150-170 degree water for 30 min

Soak bourbon cubes in 16oz bourbon for 1 week. Put oak cubes, but not the bourbon, in keg when packaging or about a month in secondary before bottling.