All-grain Homebrew Beer Recipes | Page 140 | Browse 210,000+ at Brewer's Friend

Author:

Boil Size: 7.75 Gallons

Boil Time: 90

Boil Gravity: 1.046

Efficiency: 93

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 55 ° F

Priming Method: co2

Priming Amount: 5 oz.

Creation Date: 2/3/2016 1:56 PM

Notes: 1. Mash all grains. Vorlauf
2. Sparge and rest for 10 min. Vorlauf
3. Boil Wort 90 min, hops 1, gypsum for 60 min.
4. 10 min add hops 2, whirlfloc tablet, yeast nutrient, wort chiller.
5. 10 min add hops 3 at 180 degF.
7. Cool wort to 55°F, add water to 5.5 gal if needed, aerate wort for 30 min, OG reading, and pitch yeast.
8. Ferment at 52°F till finished about 6 days.
9. Raise to 60°F over 2 days for 2-3 days.
10. Crash to 35 degF and lager for a month or two.

Mash/Sparge Water Profiile:
Distilled water treated with 5g (1-1/4 tsp) of Calcium Chloride

Author:

MKJ

Boil Size: 6.75 Gallons

Boil Time: 60

Boil Gravity: 1.059

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/2/2017 7:16 PM

Notes:

Author:

Bakke Brygg

Boil Size: 29 Litres

Boil Time: 90

Boil Gravity: 1.052

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 18 ° C

Priming Method: Sukkerlake

Priming Amount: 6 g sukker/L

Creation Date: 11/9/2013 2:26 PM

Notes: Mengden meske- og skyllevann du bør bruke kommer an på utstyret og metoden du brygger med. Som et anslag kan vi si at du kan bruke 20 l meskevann og 14,8 l skyllevann til dette ølet. Noen bryggemaskiner (f.eks. Speidel Braumeister) kan kreve større mengder meskevann. Sjekk alltid manualen på utstyret du bruker.

Mesking på 67 grader i 60 min. Utmesk på 77 grader i 5 min hvis du har mulighet til å øke temperatur i mesken.

Kjøl ned til 17 grader før pitching av gjær.

Gjæring på 18 grader til stormgjæring begynner å avta (typisk etter 3-5 dager). Øk deretter til 20 grader og hold resten av gjæringsperioden (totalt 14 dager).

Gjæralternativer: WLP001, WLP002, WLP007, WLP013, WLP051

Author:

Eggertsville Brewhouse

Boil Size: 14 Gallons

Boil Time: 60

Boil Gravity: 1.042

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.75

Primary Temp: 50 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/12/2013 7:17 PM

Notes:

Author:

Tarheel 24

Boil Size: 6.6 Gallons

Boil Time: 60

Boil Gravity: 1.047

Efficiency: 79

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/17/2016 6:58 PM

Notes:

Author:

Ctamblyn

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.06

Efficiency: 80

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: N/A

Creation Date: 8/27/2019 11:03 PM

Notes:

Author:

John B

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.049

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/31/2015 6:45 PM

Notes:

Author:

Jared Kelly

Boil Size: 6 Gallons

Boil Time: 60

Boil Gravity: 1.084

Efficiency: 69.5

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: 3.3 oz

Creation Date: 1/2/2019 1:21 AM

Notes: Add fresh ground coffee and vanilla beans sliced lengthwise to secondary for 24-72 hours, depending on preference.

I've found adding coffee grounds to secondary makes for a less bitter brew than boiling. the difference between vanilla bean tincture vs added to secondary seems to be unnoticable.

Let this beer condition for at least 2-3 months in bottle

http://brulosophy.com/2019/01/21/brewing-with-coffee-boil-kettle-addition-vs-fermentation-vessel-addition-exbeeriment-results/

For the peanut butter victory at sea, add 2 6.5oz jars PB2 peanut butter powder to secondary and bump ibu to 65

Author:

Seaview Brewery

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.048

Efficiency: 66

Mash Thickness: 1.3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 67 ° F

Priming Method: Keg

Priming Amount: Forced CO2

Creation Date: 10/2/2015 3:11 PM

Notes:

Author:

gorefisted@gmail.com

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.035

Efficiency: 70

Mash Thickness: 1.75

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 67 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/22/2015 12:26 AM

Notes: MASH SCHEDULE:

- Dough-in @ 95F with 98.4F water, hold for 45 min (phytic acid rest to help prep mash pH)
- Increase to 113F with boiling water, hold for 20 min (beta-glucan/protein rest)
- Increase to 152F with boiling water, hold for 55-60 min (main infusion/sacch rest)
- Collect 3.5 gallons in first runnings, sparge to collect 3 more

So, here we are. Making a bourbon-barrel fermented black gose... I don't think either of us is sure exactly what's going to happen, but that's part of the fun. Here's the breakdown:

We want to make a gose. This style of light-bodied, tart and funky spiced ale is pretty en-vogue right now. However, being us, we can't just do it the normal way. It's go hard or go home. So, we're going to brew a gose with 10.5% midnight wheat malt and alderwood smoked salt (y'know, cuz it's gonna be a black gose...), throw it in our bourbon barrel (which has previously aged Damnation Alley bourbon, our imperial stout and our English old ale), pitch a lactobacillus starter into it, wait a week then pitch Kölsch yeast, then probably wait a pretty long time to see what happens to it. We are doing this primarily to infect this barrel once and for all, and figure an insanely outlandish, reach-exceeding-our-grasp recipe will guarantee both that and potentially yield an interesting beer. If the beer doesn't come out palatable, then we'll at least learn something or another about sour beers and barrel-based primary fermentation. I'll keep this page updated with our trials and tribulations.

7/24/15: The experiment begins (and oh, does it begin). Making a starter consisting of steeped acidulated malt, flour and dextrose. Already pretty bizarre, but we're hoping to just grow a small lacto culture from our single vial of White Labs L. delbrueckii (WLP677).

7/24/15: - 11:50 PM: Just washed our barrel out with boiling water in preparation for filling it with wort and a lacto culture tomorrow night. Smells amazing still, but definitely a little buggy already. We had been considering this for a while, honestly. We've heard tell that a bourbon barrel will really only be able to age a beer to provide the usual woody, tannic and spirit-like characteristics for 2-3 uses before getting sour and bizarre... thus, we're pretty much prepping it for future sours right now.

7/25/15: Brew day. Everything's going fine, actually. We collected a lot but it's pretty weak, so we'll boil it down to get a more concentrated wort.

8/15/15: Just to update a bit... we went with the original plan on 7/25/15 after brewing to throw this directly into the barrel and add the previously-mentioned lacto starter we made. Additionally, however, we pitched ~65 mL of Omega Labs lactobacillus blend after throwing the other ~35 mL into a small batch of blueberry hefeweizen. Last week (a week after pitching the lacto blend and the Kölsch yeast, mind you), we tasted this monster and it's already pretty damn sour. However, it also hasn't really fermented much. Considering we only hit 1.042 for our OG (already a couple points off) and the Kölsch yeast seemingly barely did anything, likely due to the pH of the barrel's contents being too low (2.5-3.5) for fermentation to truly get underway, we may have our first "stuck" fermentation, cuz the sample we took, though awesome tasting, was about 1.020. Doesn't really matter cuz we can always throw some Brett in. I think it'll still come out awesome, but it needs time and TLC. We were asking for issues with this idea though, so it's fine.

8/29/15: It's been a couple weeks since tasting this and checking hydrometer readings. Last time we checked, this guy was actually, really fermenting, though pretty slow. Even though we believe the yeast we pitched has been all but completely halted by the low pH of the barrel's current contents, it seems lacto has been slowly chipping away at the complex dextrins and other sugars hanging out in there, as the hydrometer revealed us to actually have a then-current gravity of ~1.020. Checked again today with another 8 oz sample and we are progressing, this time with around 1.014. It's slow going, but at this point we actually have a very tasty, complex dark sour beer that presents a lot of challenging flavor components and which has a well-rounded body to boot. In terms of ABV, we are hovering somewhere around 4%, which is actually pretty solid. Changed the blowoff assembly to an airlock and sipping on the sample as I type. As I mentioned, it's very complex. In the nose I get notes of bourbon and sherry, cocoa, oak, vanilla and an intense tangy funk note, not unlike something like Boulevard's Love Child sours (which are also BBA darker sours, incidentally). The wine-like notes also linger on the tongue, though the finish is sharply sour, salty and surprisingly very dry considering there's still a decent amount of residual sugar. I think we'll probably bottle this one pretty soon, honestly. We're trying to strike a balance between taking 8 ounce samples to check gravity every few weeks and just cutting our (volume) losses and collecting what we can, bottling it and enjoying it. Besides, we're both itching to do something insane with Brett in the barrel, so that's even more reason to get this wonderful little science project out of there and into our beer fridge. Until next time.

9/18/15: We bottled this last week, using Lalvin champagne yeast to hopefully carbonate it nicely given the main yeast in the barrel probably gave up when it was added to such a low pH environment. It's somewhat carbonated in only a week which is good, but the most important thing is...

IT'S FUCKING AWESOME.

Holy shit, this is basically everything we wanted it to be, and pretty much all of the notes, nuances and flavors come together amazingly. It's smoky, salty, sour, malty, roasty, coffee-forward, tannic and bourbon-laced with an absolutely insane acid profile. Super good. Insanely pumped.

Author:

Ozarks Mountain Brewery

Boil Size: 8.5 Gallons

Boil Time: 60

Boil Gravity: 1.037

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 50 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/4/2016 4:16 PM

Notes: start with 10 gallons of .005 micron filtered water, add 1 campden tablet then add 3 grams of Calcium chloride and 2.17 ml of 88% phosphoric acid to reach 50 ppm of calcium and Cl and 5.4 ph in the mash

Author:

irysek

Boil Size: 28 Litres

Boil Time: 60

Boil Gravity: 6.8

Efficiency: 70

Mash Thickness: 3

Sugar Scale: Plato

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/7/2014 9:28 PM

Notes: German Wheat Oak Smoked Malt - 2kg

Clarification with gelatine.

Add yeast W34/70 to refermentation.

Author:

AndyBlackwood

Boil Size: 7.5 Gallons

Boil Time: 90

Boil Gravity: 1.076

Efficiency: 80

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.25

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/22/2014 7:14 PM

Notes: Vanilla beans in for 14 days

Author:

Homebrew Fanatics

Boil Size: 28 Litres

Boil Time: 60

Boil Gravity: 1.048

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 19 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/22/2017 5:26 AM

Notes: Secondary Instructions:

Once gravity is stable transfer to secondary on top of 100g of Cacao Nibs and 500g of *Fresh raspberries.

*Prepare raspberries prior to secondary by freezing for 2-3 days. Thaw raspberries just prior to adding into secondary

Leave in secondary for 5-7 days. Taste to determine when ready. Keg/bottle as normal.

Author:

Blues N Brew

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 78

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 49 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/23/2013 3:51 AM

Notes: mash volume= 3.5 gallons
Batch sparge volume=4.5 gallon
Ferment 2 weeks at 49-50*F
D. rest if needed @ 65*F 48 hours
Lager @ 33*F 2 months

Author:

dpatrickv

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/5/2012 2:21 PM

Notes:

Author:

das Brauhaus

Boil Size: 7.5 Gallons

Boil Time: 90

Boil Gravity: 1.051

Efficiency: 75

Mash Thickness: 0.8

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/25/2015 5:30 PM

Notes: pre boil gravity 1.052
o.g 1.062
f.g 1.010

Author:

Jason Rippe

Boil Size: 6 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 65

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/29/2011 7:42 PM

Notes: Taking a clone of Cigar Brewing's Jai Alai and turning it into an apple IPA. Not sure if it will work, but it sounds amazingly fun to try. Doing the initial brew at 4 gallons then putting the cooled wort onto the cider in the primary, along with the dry Simcoe hops after a week.