Extract Homebrew Beer Recipes | Page 18 | Browse 30,000+ at Brewer's Friend

Author:

Yooper

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.042

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/6/2017 7:28 PM

Notes: Ferment at 65 degrees, and then the beer can be kegged (or bottled) once it drops clear in about 10 days.

Author:

Boil Size: 3.5 Gallons

Boil Time: 60

Boil Gravity: 1.063

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/25/2015 3:35 AM

Notes:

Author:

glasscarman

Boil Size: 4 Gallons

Boil Time: 60

Boil Gravity: 1.034

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/14/2016 3:44 PM

Notes:

Author:

bfinleyui

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/29/2012 9:41 PM

Notes: Steep at 165 for 30 minutes

Bring to boil

Drop in 1lb DME

first hop addition (0.5 cascade) at 30 minutes left

second hop addition (1oz columbus) at 10 minutes left

add DME near flameout

ice bath to room temperature

pitch yeast

voila

Author:

steamboatbrewer

Boil Size: 3 Gallons

Boil Time: 90

Boil Gravity: N/A

Efficiency: 76.5

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/1/2012 4:10 PM

Notes:

Author:

Genus Brewing

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.096

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/16/2013 9:05 PM

Notes:

Author:

Boil Size: 13 Litres

Boil Time: 60

Boil Gravity: 1.137

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/18/2015 4:17 PM

Notes: Inspired by Kraken Meadery's Loud Mouth Braggot by Steve Kirby. Orange blossom must and a saison wort, fermented by Belgian Saison III yeast. Used Sorachi Ace hops, orange peel and pepper. 12.3% ABV.

Mine:
1/4 tsp nutrient in the boil
then added 1/2 tsp nutrient when adding the honey. This gives total of 200 ppm (3.6g in 18L, 1/2 tsp=2.2g).

Did a 1.5L starter with the harvested yeast from my Angeleno Saison.

Author:

Jon D'Alessandro

Boil Size: 3.1 Gallons

Boil Time: 60

Boil Gravity: 1.097

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 70 ° F

Priming Method: Corn Sugar

Priming Amount: N/A

Creation Date: 5/7/2017 1:24 AM

Notes: In a large soup pot, heat 3.4 quarts (3.2 L) of water to 165 °F (74 °C). Add crushed grains to grain bag. Submerge bag and let grains steep around 154 °F (68 °C) for 45 minutes. While grains steep, begin heating 2.25 gallons (8.5 L) of water in your brewpot. When steep is over, remove 1.1 qts. (1 L) of water from brewpot and add to the "grain tea" in steeping pot. Place colander over brewpot and place steeping bag in it. Pour grain tea (with water added) through grain bag. This will strain out any solid bits of grain and rinse some sugar from the grains. Heat liquid in brewpot to a boil, then stir in dried malt extract, add first charge of hops and begin the 60 minutes boil. With 15 minutes left in boil, add sugar, remaining hops, yeast nutrients and Irish moss. Then turn off heat and stir in liquid malt extract. Stir well to dissolve extract, then resume heating. (Keep the boil clock running while you stir.) At the end of the boil, cool wort and transfer to fermenter. Add water to make 5 gallons (19 L), aerate wort and pitch yeast. Ferment at 70 °F (21 °C). Rack to secondary when fermentation is complete. Bottle a few days later, when beer falls clear.

Author:

Homebrewski

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/19/2012 3:46 PM

Notes:

Author:

Grumblebunny

Boil Size: 2 Gallons

Boil Time: 60

Boil Gravity: 1.166

Efficiency: 25

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 1.0

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/20/2014 2:45 AM

Notes: An English style barleywine with a German influence.

- Make a 2 liter 2-step starter culture of the yeast at least 48 hours prior to starting. Cold crash the first starter and decant after 24 hours. Then make the second step, cold crash and decant. Bring the yeast slurry up to room temperature before pitching.
- Ferment until final gravity is achieved
- Transfer to your secondary fermentation vessel
- Condition in the secondary for 1-2 months
- Bottle and allow to condition for 6-12 months

Author:

DrummerBoySeth

Boil Size: 2.5 Gallons

Boil Time: 60

Boil Gravity: 1.177

Efficiency: 78

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.75

Primary Temp: 70 ° F

Priming Method: Turbinado

Priming Amount: 1.4 oz

Creation Date: 3/6/2013 7:20 PM

Notes: 3rd place in the "Carolina Quarterly Brew Off", specialty beer category. Awarded April 13, 2013.

Recipe was created for the wild card category of the brew contest... "beer with aromatic malt, turbinado sugar and cinnamon"

started with 2 gallons pre-boil. volume after boil was 0.8 gallons (lost 1.2 gallons to the boil.) Need to increase pre-boil volume to 2.75 gallons to end up with 1.5 gallons post-boil

measured OG was 1.080 after top-off

I will probably add a little wheat malt and/or oatmeal next time for a little more mouthfeel and head retention. Also suggest increasing (doubling?) the cinnamon, since I could not taste it. The 2 main "dings" on the scoresheet were

1. mouthfeel a little too thin.
2. cannot taste the cinnamon enough

Author:

Eggertsville Brewhouse

Boil Size: 3 Gallons

Boil Time: 20

Boil Gravity: N/A

Efficiency: 65

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/17/2012 11:54 PM

Notes:

Author:

Kruk Brewing

Boil Size: 2 Gallons

Boil Time: 15

Boil Gravity: 1.041

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/10/2019 9:16 PM

Notes:

Author:

S0rceress0

Boil Size: 1.25 Gallons

Boil Time: 60

Boil Gravity: 1.038

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/1/2015 6:51 PM

Notes: To make this a 9% watermelon ale, add 1 pound of wheat DME to the recipe.

Author:

Brewmaster Tom

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 30

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: Corn Sugar

Priming Amount: N/A

Creation Date: 3/14/2012 5:27 PM

Notes:

Author:

Ninja Bunny

Boil Size: 3.5 Gallons

Boil Time: 60

Boil Gravity: 1.108

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 1.0

Primary Temp: 71 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/28/2015 2:04 AM

Notes:

Author:

Blackchance

Boil Size: 4 Gallons

Boil Time: 60

Boil Gravity: 1.08

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 72 ° F

Priming Method: N/A

Priming Amount: 1/4 tsp per bottle

Creation Date: 9/1/2016 8:21 AM

Notes:

IMPORTANT: The initial primary batch should be only 4.5 gallons NOT 5.5. This is because you will be adding a gallon of peach juice in the secondary.

Here is the process for calculating your ABV this way:
Take Primary OG and FG to calculate ABV as normal (POG, PFG, and PABV). Add the peach juice. Multiply the PABV by 0.82, because you've just watered it down.
Take the new OG for the secondary (SOG), and take Secondary FG after 2 weeks fermentation (SFG) to get Secondary ABV (SABV). Then add the PABV to the SABV to get your true ABV.

(PABV*0.82) + SABV = ABV.
You're shooting for around 5% when this is complete.
It should be noted that your IBUs will also go down, and should be multiplied by 0.82 as well, putting this recipe at around 20 IBUs

Recipe is best with pulp-free peach juice. First test batch lost almost 2 gallons in sediment due to peach pulp from the juicer.

The vanilla will be mild on this one because of the noticeable aroma and flavor of peach. Use two beans in the secondary if you want a vanilla kick, or just one if you only want a slightly creamier taste.

I've brewed my fair share of beers, and drank many more than my fair share, and this is one of the most delicious and drinkable beers I've ever had. Give it a try!

Author:

Sustainable Alcoholic

Boil Size: 8 Litres

Boil Time: 60

Boil Gravity: N/A

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: Dextrose Solution

Priming Amount: 180g / 120ml

Creation Date: 2/15/2012 5:14 PM

Notes: Attempt to reproduce hop bill of Hardcore IPA, shop didn't have Simcoe so substituted Chinook. Also talked into using an Australian Pale Ale malt by chap in the shop.