Hughy's Revenge Beer Recipe | Extract Common Cider | Brewer's Friend
Brew your best beer EVER. Save 10% on Brewer's Friend Premium today. Use code TAKE10. Sign Up ×

Hughy's Revenge

152 calories 7.3 g 12 oz
brewer logo
Beer Stats
Method: Extract
Style: Common Cider
Boil Time: 0 min
Batch Size: 6 gallons (fermentor volume)
Pre Boil Size: 6 gallons
Post Boil Size: 6 gallons
Pre Boil Gravity: 1.048 (recipe based estimate)
Post Boil Gravity: 1.048 (recipe based estimate)
Efficiency: 35% (steeping grains only)
Source: R Maillie
Calories: 152 calories (Per 12oz)
Carbs: 7.3 g (Per 12oz)
Created: Thursday October 13th 2016
1.048
1.000
6.3%
0.0
3.2
n/a
n/a
Want no ads? Go Premium and unlock all our brewing tools!
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
6 lb Apple Cider6 lb Apple Cider 48 3 100%
6 lbs / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
1 tsp Pectic Enzyme Fining Primary 0 min.
5 oz Oak Tincture (Scotch) Flavor Kegging 0 min.
 
Yeast
Fermentis - Safale - English Ale Yeast S-04
Amount:
2 Each
Cost:
Attenuation (custom):
100%
Flocculation:
High
Optimum Temp:
54 - 77 °F
Starter:
No
Fermentation Temp:
59 °F
Pitch Rate:
0.75 (M cells / ml / ° P) 203 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 2.5 Volumes
 
Target Water Profile
East Bradford, PA USA
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
 
Notes

Cider finished with a Scotch and oak tincture.

  • Add 1g/L Malic acid to lower pH by .1 as needed to reach 3.7 pH.
  • Check pH and add potassium metabisulfite as needed for a partial kill (for more information see chart: www.cider.org.uk/sulphite.html).
  • Stock solution SO2: dissolve 3 grams of potassium metabisulphite in 30 ml (also grams) of water which corresponds to 50 ppm of SO2 for a six gallon batch
  • Wait 24 to 48 hours before adding pectic enzyme and pitching yeast.

  • Primary fermentation: 4-5 weeks @ 59°

  • Add 5 crushed campden tablets dissolved in a bit of cider to carboy /keg before transferring for secondary/conditioning.
  • Secondary: 8 weeks @ 60°- 65° (cellar temps)

  • At packaging, add the scotch and oak tincture to taste (used 3oz medium toast french oak cubes (previously soaked in bourbon) in an 8 oz mason jar filled with the scotch of your choice, aged for three months). Added until I could just taste the Scotch. The tannins from the oak really balance out the acidity very nicely.

  • Transfer to a keg to condition: 6 months @ 60°- 65° (cellar temps) in pressurized keg.
Recipe Picture
Last Updated and Sharing
 
1,096
Views
3
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2019-09-28 15:05 UTC
NEW Water Requirements:
Hughy's Revenge
Equipment Profile Used

System Default

Close
Print
Water Requirements:
Hughy's Revenge
Close
Print
Recipe Cost $ (USD)
Recipe costs can be adjusted by changing the batch size. They won't be saved but will give you an idea of costs if your final yield was different.
Gallons
Cost $ Cost %
Fermentables $
Steeping Grains
(Extract Only)		 $
Hops $
Yeast $
Other $
Cost Per Barrel $ 0.00
Cost Per Pint $ 0.00
Total Cost $ 0.00
Ok
Other Brewers Who Brewed This Recipe:
Discussion about this recipe:
You must be logged in to add comments.

If you do not yet have an account, you may register here.

Back To Top
Want no ads? Go Premium and unlock all our brewing tools!
Copyright © 2007-2024 Brewer's Friend, Inc. - Send Feedback - Terms - RSS Feed - Do Not Sell or Share My Personal Information