Fjord & Fjell CZ Pale Lager

Two or three days before brew day, make a 2-qt. (2-L) yeast starter, aerating the wort thoroughly (preferably with oxygen) before pitching the yeast.

On brew day, mash in at 156 °F (69 °C) in 14 qts. (13 L) of water and hold this temperature until converted, 30 to 45 minutes. Pull a thick decoction of at least half the mash, then boil the decoction until it changes color and consistency, about 25 minutes. Stir the decoction frequently to avoid scorching. Return the decoction to the main mash and hold at 168 °F (76 °C) for mash out. Recirculate until clear, fly sparge with 168 °F (76 °C) water until 6.5 gallons (25 L) of wort is collected.

Boil the wort for 90 minutes, adding the hops at times indicated in the recipe. First wort hops are added to the kettle before the wort is run off. After adding the final hops when the heat is turned off, immediately begin chilling the wort. Chill to 43–45 °F (6–7 °C). Chilling to this low temperature may take two cooling stages or the use of an ice bath to reduce the temperature of the cooling water.

Oxygenate, then pitch the yeast starter. Allow fermentation temperature to rise to no more than 50 °F (10 °C) until desired final gravity (FG) is achieved. Then rack and slowly chill to lagering temperature. Lager for 4 to 6 weeks at 33 °F (1 °C). Prime and bottle condition, or keg and force carbonate to 2.4 volumes.