DIRECTIONS
Mill the grains and mash at 144°F (62°C) for 45 minutes; raise to 154°F (68°C) and rest 15 minutes; then raise to 162°F (72°F), rest 15 minutes, and mash out. Sparge and top up as necessary to get about 6 gallons (23 liters) of wort, depending on your evaporation rate. Boil for 90 minutes, adding hops according to the schedule. After the boil, do a whirlpool step: Stir or recirculate to create a vortex, then allow 20 minutes to settle. Chill to 50°F (10°C), aerate the wort, and pitch the yeast. Ferment at 50°F (10°C) for 10 days to clear diacetyl. Crash to 32°F (0°C), package, and carbonate to 2.5–2.6 volumes of CO2.
BREWER’S NOTES
Mash: We aim for a mash pH of 5.3; adjust the acidulated malt as needed. (We also aim for a wort pH of 5.1.) If you can’t do a step mash, a single infusion at 149°F (65°C) for 60 minutes is fine.
For quick copying and pasting to a text based forum or email.
Click the Download as HTML file button below.
Paste the following into your website / publishing platform:
* The height/width of the iframe can be set as a percentage of the container
(width="95%"), or in pixels (width="500px").
Looks good at any width above 320px.
Updates to the recipe automatically flow through.
The recipe's view count is incremented when someone views the recipe at your site!
Embedded recipes appear with no ads.
NEW Water Requirements:
Wolf Pack American Lager
Equipment Profile Used
System Default
Close
Print
Water Requirements:
Wolf Pack American Lager
Close
Print
Recipe Cost
$ (NZD)
Recipe costs can be adjusted by changing the batch size. They won't be saved but will give you an idea of costs if your final yield was different.
Gallons
Cost $
Cost %
Fermentables
$
Steeping Grains (Extract Only)
$
Hops
$
Yeast
$
Other
$
Cost Per Barrel
$0.00
Cost Per Pint
$0.00
Total Cost
$0.00
Ok
Discussion about this recipe:
You must be logged in to add comments.
If you do not yet have an account, you may register here.
Recipe Tools ▼
Brew!
