Brew Log History
Target 56°F
Ambient: {{ stats.ambient | number:0 }} °F
OG: {{ stats.ogGravity | number:3 }}
Attenuation: {{ stats.attenuation | number:2 }}%
Calories: {{ stats.calories | number:1 }} / 12oz
Carbs: {{ stats.carbs | number:1 }} g / 12oz
Readings: {{ readingsCount | number }}
{{ formatHeaderDate(dates.navStart) | date:'mediumDate' }} to {{ formatHeaderDate(dates.navEnd) | date:'mediumDate' }}
Last Updated: {{ stats.lastupdated.ago }} from {{ stats.lastupdated.source }}
Hops
Amount
|
Variety
|
Cost
|
Type
|
AA
|
Use
|
Time
|
IBU
|
Bill %
|
3 oz |
Saaz3 oz Saaz Hops |
|
Pellet |
3.5 |
Boil
|
90 min |
20.55 |
28.6% |
3.50 oz |
Saaz3.5 oz Saaz Hops |
|
Pellet |
3.5 |
Boil
|
20 min |
13.57 |
33.3% |
2 oz |
Saaz2 oz Saaz Hops |
|
Pellet |
3.5 |
Boil
|
10 min |
4.64 |
19% |
2 oz |
Saaz2 oz Saaz Hops |
|
Pellet |
3.5 |
Boil
|
0 min |
|
19% |
10.50 oz
/ $ 0.00
|
Hops Summary
Amount
|
Variety
|
Cost
|
IBU
|
Bill %
|
10.50 oz |
Saaz (Pellet) 10.499999975982 oz Saaz (Pellet) Hops |
|
38.76 |
99.9% |
10.50 oz
/ $ 0.00
|
Mash Guidelines
Amount
|
Description
|
Type
|
Start Temp
|
Target Temp
|
Time
|
9 gal |
Protein Rest - Pull the first decoction when finished |
Temperature |
65 °F |
125 °F |
15 min |
|
Beta Rest - Add the first decoction back, aiming for a temperature of 148F. Hold this rest for 30min, then pull the second decoction |
Decoction |
125 °F |
148 °F |
30 min |
|
Alpha Rest - Add the second decoction back, aiming for a rest temperature of 158F. Hold at this temperature for 30min |
Decoction |
148 °F |
158 °F |
30 min |
|
Mash Out - Raise the temperature to 167F and hold for 10min |
Temperature |
158 °F |
167 °F |
10 min |
7.2 gal |
Sparge - Sparge as usual after mash |
Temperature |
-- |
170 °F |
30 min |
Starting Mash Thickness:
1.5 qt/lb
Starting Grain Temp:
58 °F |
Priming
Method: co2
CO2 Level: 2.25 Volumes |
Target Water Profile
WBB Pil
Notes
Double Decoction:
Note: Pilsner Urquell uses a triple decoction method with an initial acid rest, but I use well enough modified malts and correct for pH already so the first of three decoctions is unnecessary. The decoction measurements below are ones I developed for an electric system and err on the side of caution, so they are the lower amounts needed to potentially reach the next temperature step and direct heat can be applied to compensate.
Perform a protein rest at 125F for 15min, then pull off slightly less than 1/3 (1.16gal/4.4L) of the thickest mash and place it in a separate pot. Bring the pot slowly up to 158F and hold for 15min, then slowly bring it up to a boil and proceed to boil for 10min. Stir often so the grains do not burn, but try to allow some 'browning' to help darken the colour and enhance the flavour/aroma profiles. Add the decoction back to the 125F mash, little by little, aiming for a beta rest temperature of 148F. Hold this temperature for 30min while adding back any leftover decoction (if any) as it cools. After this has finished, pull off roughly 1/6 (0.7gal/2.6L) of the thickest mash a second time and place it in the separate pot. Slowly bring the pot up to a boil and continue to boil for 10min. Add the second decoction back to the mash, little by little, aiming for an alpha rest temperature of 158F. Hold this temperature for 30min while adding back any leftover decoction (if any) as it cools. Once this rest has finished, raise the temperature up to a mash out rest of 167F and hold for 10min. After the decoctions and mash out are finished proceed to sparge/lauter as usual.
No Decoction:
Instead of the labour intensive double decoction mash schedule you could:
- Substitute some of the pilsner malt for vienna and/or munich to add colour and depth.
- Include some melanoidin malt for a slight decoction 'feel'.
- Add some carapils malt (or your preferred alternative) for improved head retention.
- After which, just carry out a temperature/infusion mash schedule based on your preferences.
This beer won a national silver medal at the Saskatoon Headhunters Competition (2017) and has consistently scored 40's at other national competitions.
*With the regular 3.5%AA Saaz the hop additions are 1.5oz @ 90min, 2oz @ 20min, 1oz @ 10min, 1oz @ 0min.
Last Updated and Sharing
- Public: Yup, Shared
- Last Updated: 2023-01-11 03:25 UTC
For quick copying and pasting to a text based forum or email.
Click the Download as HTML file button below.
Recipe costs can be adjusted by changing the batch size. They won't be saved but will give you an idea of costs if your final yield was different.
|
Cost $ |
Cost % |
Fermentables |
$ |
|
Steeping Grains (Extract Only) |
$ |
|
Hops |
$ |
|
Yeast |
$ |
|
Other |
$ |
|
Cost Per Barrel |
$ 0.00 |
|
Cost Per Pint |
$ 0.00 |
|
Total Cost |
$ 0.00 |
|
Discussion about this recipe:
Back To Top