Eclipse XPA

METHOD:

Fill clean Kettle with 16 litres of water at 67 °C. Add Mash Salts - 2 tsp or 10g of Gypsum (Calcium Sulphate)
Mill the grains and dough-in targeting a mash of around 3 Litres of water to 1 Kg of grain (a liquor-to-grist ratio of about 3:1 by weight) and a temperature of 67 °C (152 °F).
Hold the mash at 67 °C ( 152 °F ) until enzymatic conversion is complete for 60 minutes.
Infuse the mash with near boiling water while stirring or with a recirculating mash system raise the temperature to mash out at 76 °C (168 °F). Mash out for 10 minutes.
Fly sparge slowly with 14 Litres of 76 °C (168 °F ) water, collecting wort until the pre-boil kettle volume is around 25 L (6.5 gallons).
The total boil time will be 90 minutes.
OPTIONAL Deltafloc or Irish Moss at 75 mins in or 15 mins remaining on the boil.
First hop addition of 20 grams of Eclipse to the Boil with 5 mins remaining.
Add second hop addition of 30 grams of Eclipse at flameout or 0 minutes remaining.
At flameout, cool wort to 19°C (67 °F ), decant starter or open Gold Pitch and pitch liquid GigaYeast or 2 x sachets of dry yeast into pre oxygenated wort.
Over the course of the two-week fermentation, ramp the temperature up to 23°C (73 °F ) to ensure full attenuation.
Once full attenuation is reached, dry hop with 50gm of Eclipse for 3 days.
When finished, carbonate the beer to approximately 2.5 volumes (5 g/L) of CO2 (or add 125g of table sugar or 180g of Light Dried Malt Extract if bottling) and drink fresh. Prost!