Bribie the Elder Beer Recipe | BIAB Double IPA | Brewer's Friend

Bribie the Elder

265 calories 24.8 g 330 ml
brewer logo
Beer Stats
Method: BIAB
Style: Double IPA
Boil Time: 60 min
Batch Size: 22 liters (fermentor volume)
Pre Boil Size: 28 liters
Post Boil Size: 22 liters
Pre Boil Gravity: 1.068 (recipe based estimate)
Post Boil Gravity: 1.086 (recipe based estimate)
Efficiency: 65% (brew house)
Source: https://byo.com/recipe/russian-river-brewing-co-s-pliny-the-elder-clone/
Calories: 265 calories (Per 330ml)
Carbs: 24.8 g (Per 330ml)
Created: Monday December 14th 2020
1.086
1.018
9.0%
171.7
7.9
5.7
n/a
Want no ads? Go Premium and unlock all our brewing tools!
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
7.50 kg Gladfield - American Ale Malt7.5 kg American Ale Malt 37.3 2.54 84.9%
0.18 kg Voyager Craft Malt - Voodoo Schooner0.18 kg Voodoo Schooner 35.9 43.2 2%
0.45 kg New Zealand - Gladiator Malt0.45 kg Gladiator Malt 37.3 5.08 5.1%
0.30 kg Corn Sugar - Dextrose0.3 kg Corn Sugar - Dextrose 42 0.5 3.4%
0.40 kg Briess - DME Pilsen Light0.4 kg DME Pilsen Light 45 2 4.5%
8.83 kg / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
50 g Warrior50 g Warrior Hops Pellet 14.2 Boil 60 min 69.78 17.5%
15 g Chinook15 g Chinook Hops Pellet 13.7 Boil 50 min 19.2 5.3%
15 g Yakima Chief Hops - Columbus LupuLN2 (Cryo)15 g Columbus LupuLN2 (Cryo) Hops Lupulin Pellet 25.9 Boil 40 min 33.51 5.3%
15 g Yakima Chief Hops - Simcoe LupuLN2 (Cryo)15 g Simcoe LupuLN2 (Cryo) Hops Lupulin Pellet 26.5 Boil 30 min 30.02 5.3%
50 g Centennial50 g Centennial Hops Pellet 10 Whirlpool 20 min 11.36 17.5%
15 g Yakima Chief Hops - Simcoe LupuLN2 (Cryo)15 g Simcoe LupuLN2 (Cryo) Hops Lupulin Pellet 23 Whirlpool 20 min 7.84 5.3%
50 g Yakima Chief Hops - Columbus LupuLN2 (Cryo)50 g Columbus LupuLN2 (Cryo) Hops Lupulin Pellet 24.5 Dry Hop at 10 °C 1 days 17.5%
50 g Centennial50 g Centennial Hops Pellet 10 Dry Hop at 10 °C 1 days 17.5%
25 g Yakima Chief Hops - Simcoe LupuLN2 (Cryo)25 g Simcoe LupuLN2 (Cryo) Hops Lupulin Pellet 23 Dry Hop at 10 °C 1 days 8.8%
285 g / $ 0.00
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
32.5 L Infusion 71 °C 67 °C 60 min
 
Other Ingredients
Amount Name Cost Type Use Time
0.50 tsp Brewtan B Water Agt Mash 65 min.
0.25 tsp Potassium Metabisulfite Water Agt Mash 65 min.
1.50 g Calcium Chloride (dihydrate) Water Agt Mash 1 hr.
6 g Chalk Water Agt Mash 1 hr.
2.50 g Epsom Salt Water Agt Mash 1 hr.
13.50 g Gypsum Water Agt Mash 1 hr.
0.50 each Whirlfloc Water Agt Boil 15 min.
0.50 tsp Brewtan B Water Agt Boil 10 min.
7 g Fermaid AT Water Agt Boil 10 min.
 
Yeast
Fermentis - Safale - American Ale Yeast US-05
Amount:
2 Each
Cost:
Attenuation (custom):
77%
Flocculation:
Medium
Optimum Temp:
12 - 25 °C
Starter:
No
Fermentation Temp:
19.5 °C
Pitch Rate:
0.35 (M cells / ml / ° P) 159 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: co2       Amount: 1.85 bar       Temp: 20 °C       CO2 Level: 2.45 Volumes
 
Target Water Profile
IPA/DIPA Water - Back of the Passage
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
165 18 25 55 300 180
Calcium chloride - 1.5 g
Chalk - 6 g
Epsom salt - 2.5 g
Gypsum - 13.5 g
Mash Chemistry and Brewing Water Calculator
 
Notes

Pliny the Elder clone
Batch #1 (Eff.: 65%, Att.: 77%, ABV: 8.9%) - 17/12/20

  • Mash vol.: 32.5 L, Pre-boil vol.: 28 L, Batch vol.: 22 L
  • OG: 1086 (Refract.), 1084 (Tilt)
    Mash was 2.5 hours long as new bag hanging rig took ages to build.
    Chilled to 24 C and (x2) yeast dry pitched, then left at 19.5 for 5 days while away then temp upped to 22.5 C over 2 days.
    23/12/20 - SG: 1022 (Tilt)
    24/12/20 - SG: 1020 (Tilt)
    25/12/20 - SG: 1019 (Tilt)
    26/12/20 - SG: 1018 (Tilt)
    27/12/20 - SG: 1018 (Tilt) dry hopped (only had 19 g of Simcoe CRYO) and cold crashed to 10 C for 24 hrs (cold dry hop) then crashed again to 1 C.
    31/12/20 - Kegged and carbed at 30 psi for 2:30 min.
    Dangerously drinkable this bad boy went very quickly, and messed a few people up. I'll brew it again without any changes.
Recipe Picture
Last Updated and Sharing
 
340
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2021-01-14 06:33 UTC
NEW Water Requirements:
Bribie the Elder
Equipment Profile Used

System Default

Close
Print
Water Requirements:
Bribie the Elder
Close
Print
Recipe Cost $ (USD)
Recipe costs can be adjusted by changing the batch size. They won't be saved but will give you an idea of costs if your final yield was different.
Gallons
Cost $ Cost %
Fermentables $
Steeping Grains
(Extract Only)		 $
Hops $
Yeast $
Other $
Cost Per Barrel $ 0.00
Cost Per Pint $ 0.00
Total Cost $ 0.00
Ok
Discussion about this recipe:
You must be logged in to add comments.

If you do not yet have an account, you may register here.

Back To Top
Want no ads? Go Premium and unlock all our brewing tools!
Copyright © 2007-2024 Brewer's Friend, Inc. - Send Feedback - Terms - RSS Feed - Do Not Sell or Share My Personal Information