View Recipe

Recipe Tools ▼
- Brew!
- Copy
- Label Generator
- Quick Water Requirements
- Add To
  Shopping List
Export ▼
- Embed
- Text
- HTML
- BeerXML
Print

Whitbread 1917 Session IPA Riff

Method: Partial Mash
Style: American IPA
Boil Time: 90 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 3.5 gallons
Post Boil Size: 2.5 gallons
Pre Boil Gravity: 1.051 (recipe based estimate)
Post Boil Gravity: 1.072 (recipe based estimate)
Efficiency: 70% (brew house)
Calories: 148 calories (Per 12oz)
Carbs: 15.2 g (Per 12oz)

Created: Saturday October 26th 2019

Original Gravity:

1.045

Final Gravity:

1.011

ABV (standard):

4.5%

IBU (tinseth):

74.6

SRM (morey):

5.2

Mash pH

n/a

Cost $

n/a

Want no ads? Go Premium and unlock all our brewing tools!

Fermentables

Amount	Fermentable	PPG	°L	Bill %
2 lb	American - Pale 6-Row2 lb Pale 6-Row	35	1.8	32.8%
3.10 lb	Dry Malt Extract - Light3.1 lb Dry Malt Extract - Light	42	4	50.8%
1 lb	Brown Sugar1 lb Brown Sugar - (late boil kettle addition)	45	15	16.4%
6.10 lbs / $ 0.00

Hops

Amount	Variety	Type	AA	Use	Time	IBU	Bill %
1.25 oz	Kent Goldings1.25 oz Kent Goldings Hops	Pellet	5	Boil	20 min	14.23	29.4%
3 oz	Kent Goldings3 oz Kent Goldings Hops	Pellet	5	Boil	90 min	60.33	70.6%
4.25 oz / $ 0.00

Show Summary View

Amount	Variety	Cost	IBU	Bill %
4.25 oz	Kent Goldings (Pellet)		74.56	100%
4.25 oz / $ 0.00

Yeast

Wyeast - Whitbread Ale 1099

Amount:	1 Each	Cost:
Attenuation (avg):	70%	Flocculation:	High
Optimum Temp:	64 - 75 °F	Starter:	No
Fermentation Temp:	-	Pitch Rate:	0.35 (M cells / ml / ° P) 74 B cells required

$ 0.00 Yeast Pitch Rate and Starter Calculator

Priming

CO₂ Level: 0 Volumes

Target Water Profile

Balanced Profile

Ca⁺²	Mg⁺²	Na⁺	Cl^-	SO₄^-2	HCO₃^-
0	0	0	0	0	0
Mash Chemistry and Brewing Water Calculator

Notes

https://blog.eckraus.com/ipa-session-beer-recipe-all-grain-extract

All-Grain Directions:
Mash the crushed grains in about 1.5 gallons of clean, chlorine-free water for two hours. Lauter and sparge, collecting about 6.5 gallons of wort in the brew kettle. Bring to a boil and boil for 90 minutes, adding hops according to schedule. Mix in the brown sugar at the end of the boil. Chill wort to fermentation temperature and ferment at 70˚F until complete. Bottle or keg and enjoy!

Partial-Mash Directions:
Replace the English pale malt with 3.1 lbs. light dry malt extract. Mash the crushed six-row malt in 2 qts. of water, then sparge. Add enough water to make a 3-gallon boil and mix in the malt extract. Bring to a boil. Increase the 90-minute hop addition to 3.5 oz. and the 20-minute hop addition to 1.5 oz. Continue with the recipe above.

Incidentally, Whitbread yeast is derived from that brewery. Safale S-04 is the dry yeast version.

Last Updated and Sharing

445

Views

Brews

Public: Yup, Shared
Last Updated: 2019-10-26 23:43 UTC

System Default

Recipe costs can be adjusted by changing the batch size. They won't be saved but will give you an idea of costs if your final yield was different.

Cost for

Gallons

Cost by

Final Yield

	Cost $	Cost %
Fermentables	$
Steeping Grains (Extract Only)	$
Hops	$
Yeast	$
Other	$
Cost Per Barrel	$ 0.00
Cost Per Pint	$ 0.00
Total Cost	$ 0.00

Discussion about this recipe:

You must be logged in to add comments.

If you do not yet have an account, you may register here.

Want no ads? Go Premium and unlock all our brewing tools!