Method:All Grain Style:American Pale Ale Boil Time:60 min Batch Size:15 liters
(fermentor volume) Pre Boil Size:19 liters Post Boil Size:15.5 liters Pre Boil Gravity:1.042
(recipe based estimate)
Post Boil Gravity:1.051
(recipe based estimate)
Efficiency: 70%
(brew house) Source:Stefan Gradin Calories:164.3
(Per 330ml)
Carbs:14.7 g
(Per 330ml)
Heat 11L of water to 71°C, then pour the grain and mash at 68°C for an hour.
After 1 hour, sparge at 78°C .
Before sparging, worlauf two liters through.
In a separate pot, heat 15L of water to 77°C and sparge by carefully add water to the mash and filter out through the mash tun until the boil volume of 19.5 liters has been reached, collecting in the brew kettle.
Right after sparging, add hops as per addition table.
Add whirlpool hops at around 70 degrees
At the end of the boil, cool wort as fast as possible down to yeast pitching temperature 21°C. The OG should be at 1.054 (dilute if not).
Sanitize your fermenter by shaking sanitizer in it, transfer the wort to it, pitch 1/4 pack of Safale S-05 dry yeast (1 gram per litre) without bothering about rehydrating the yeast, shake well for 5 minutes for oxygenation, place a sanitized stopper and blow-off tube and let ferment for 8 days at 19°C in a dark place
ferment 14 days
Bottle beer with minimal oxygenation
Add sugar pastilles for bottling. One per bottle.
Let condition in bottles for 2 weeks (preferably 3)
Refrigerate upright overnight (or for 30 minutes in a deep freezer)
Serve in a pint in one quiet go, leaving the yeast in the bottle
Discard the yeast and rinse the bottle
14/4 - 6g yeast and OG - 1.043
25/4 - Gravity 1.016
06/05 - FG - 1.009
ABV = 4.46%
16/6 - 6g yeast and OG 1.041
Last Updated and Sharing
483
Views
1
Brews
Public: Yup, Shared
Last Updated: 2019-10-19 14:38 UTC
For quick copying and pasting to a text based forum or email.
Click the Download as HTML file button below.
Paste the following into your website / publishing platform:
* The height/width of the iframe can be set as a percentage of the container
(width="95%"), or in pixels (width="500px").
Looks good at any width above 320px.
Updates to the recipe automatically flow through.
The recipe's view count is incremented when someone views the recipe at your site!
Embedded recipes appear with no ads.
NEW Water Requirements:
Yuki's session IPA ver 7
Equipment Profile Used
System Default
Close
Print
Water Requirements:
Yuki's session IPA ver 7
Close
Print
Recipe Cost
£ (GBP)
Recipe costs can be adjusted by changing the batch size. They won't be saved but will give you an idea of costs if your final yield was different.
Gallons
Cost £
Cost %
Fermentables
£
Steeping Grains (Extract Only)
£
Hops
£
Yeast
£
Other
£
Cost Per Barrel
£0.00
Cost Per Pint
£0.00
Total Cost
£0.00
Ok
Discussion about this recipe:
You must be logged in to add comments.
If you do not yet have an account, you may register here.