extract lush clone Beer Recipe | Extract No Profile Selected | Brewer's Friend

extract lush clone

195 calories 19.6 g 12 oz
brewer logo
Beer Stats
Method: Extract
Style: No Profile Selected
Boil Time: 60 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 3 gallons
Post Boil Size: 1.5 gallons
Pre Boil Gravity: 1.108 (recipe based estimate)
Post Boil Gravity: 1.215 (recipe based estimate)
Efficiency: 35% (steeping grains only)
Source: Genus Brewing
Hop Utilization: 94%
Calories: 195 calories (Per 12oz)
Carbs: 19.6 g (Per 12oz)
Created: Sunday September 29th 2019
1.059
1.014
5.9%
43.7
3.5
n/a
n/a
Want no ads? Go Premium and unlock all our brewing tools!
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
6 lb Dry Malt Extract - Pilsen6 lb Dry Malt Extract - Pilsen 42 2 63.2%
1 lb Corn Sugar - Dextrose1 lb Corn Sugar - Dextrose 42 0.5 10.5%
0.50 lb Bestmalz - Chit Malt0.5 lb Chit Malt 42 2 5.3%
7.50 lbs / $ 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
1.50 lb Briess - Brewers Oat Flakes1.5 lb Brewers Oat Flakes 32.2 2.5 15.8%
0.50 lb German - Acidulated Malt0.5 lb Acidulated Malt 27 3.4 5.3%
$ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1 oz Bravo1 oz Bravo Hops Pellet 15.5 Boil 60 min 29.98 16.7%
2 oz Centennial2 oz Centennial Hops Pellet 10 Boil 5 min 7.71 33.3%
2 oz Yakima Chief Hops - Mosaic LupuLN2 (Cryo)2 oz Mosaic LupuLN2 (Cryo) Hops Lupulin Pellet 22 Whirlpool at 170 °F 10 min 5.99 33.3%
1 oz Yakima Chief Hops - Mosaic LupuLN2 (Cryo)1 oz Mosaic LupuLN2 (Cryo) Hops Lupulin Pellet 22 Dry Hop 5 days 16.7%
6 oz / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
4 g Calcium Chloride (anhydrous) Water Agt Mash 0 min.
2 g Gypsum Water Agt Mash 0 min.
 
Yeast
Imperial Yeast - A07 Flagship
Amount:
1 Each
Cost:
Attenuation (avg):
73%
Flocculation:
Medium-low
Optimum Temp:
60 - 72 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 106 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 0 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Use 1 gallon of native of tap water and 1 gallon distilled water when steeping grains. Use distilled water when "topping off".
"extract lush clone" No Profile Selected beer recipe by Genus Brewing. Extract, ABV 5.9%, IBU 43.69, SRM 3.49, Fermentables: (Dry Malt Extract - Pilsen, Corn Sugar - Dextrose, Chit Malt) Steeping Grains: (Brewers Oat Flakes, Acidulated Malt) Hops: (Bravo, Centennial, Mosaic LupuLN2 (Cryo)) Other: (Calcium Chloride (anhydrous), Gypsum)
Recipe Picture
Last Updated and Sharing
 
387
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2019-11-17 01:46 UTC
NEW Water Requirements:
extract lush clone
Equipment Profile Used

System Default

Close
Print
Water Requirements:
extract lush clone
Close
Print
Recipe Cost $ (USD)
Recipe costs can be adjusted by changing the batch size. They won't be saved but will give you an idea of costs if your final yield was different.
Gallons
Cost $ Cost %
Fermentables $
Steeping Grains
(Extract Only)		 $
Hops $
Yeast $
Other $
Cost Per Barrel $ 0.00
Cost Per Pint $ 0.00
Total Cost $ 0.00
Ok
Discussion about this recipe:
You must be logged in to add comments.

If you do not yet have an account, you may register here.

Back To Top
Want no ads? Go Premium and unlock all our brewing tools!
Copyright © 2007-2024 Brewer's Friend, Inc. - Send Feedback - Terms - RSS Feed - Do Not Sell or Share My Personal Information