Pale Ale Beer Recipe | All Grain American Pale Ale by BG Brewster | Brewer's Friend

Pale Ale

188 calories 18.6 g 12 oz
brewer logo
Beer Stats
Method: All Grain
Style: American Pale Ale
Boil Time: 60 min
Batch Size: 5.25 gallons (fermentor volume)
Pre Boil Size: 7.5 gallons
Pre Boil Gravity: 1.040 (recipe based estimate)
Efficiency: 75% (brew house)
Calories: 188 calories (Per 12oz)
Carbs: 18.6 g (Per 12oz)
Created: Sunday July 28th 2019
1.057
1.013
5.7%
62.1
17.5
n/a
n/a
Want no ads? Go Premium and unlock all our brewing tools!
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
5 lb United Kingdom - Maris Otter Pale5 lb Maris Otter Pale 38 3.75 45.5%
3 lb American - Vienna3 lb Vienna 35 4 27.3%
2 lb American - Munich - 60L2 lb Munich - 60L 33 60 18.2%
0.50 lb American - Caramel / Crystal 20L0.5 lb Caramel / Crystal 20L 35 20 4.5%
0.50 lb American - Caramel / Crystal 60L0.5 lb Caramel / Crystal 60L 34 60 4.5%
11 lbs / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1 oz Cascade1 oz Cascade Hops Pellet 7 Boil 60 min 27.83 20%
1 oz Cascade1 oz Cascade Hops Pellet 7 Boil 30 min 21.39 20%
1 oz Cascade1 oz Cascade Hops Pellet 7 Boil 10 min 10.09 20%
0.50 oz Cascade0.5 oz Cascade Hops Pellet 7 Boil 5 min 2.77 10%
0.50 oz Cascade0.5 oz Cascade Hops Pellet 7 Boil 0 min 10%
1 oz Cascade1 oz Cascade Hops Pellet 7 Dry Hop 0 days 20%
5 oz / $ 0.00
 
Yeast
White Labs - California Ale Yeast WLP001
Amount:
1 Each
Cost:
Attenuation (avg):
76.5%
Flocculation:
Medium
Optimum Temp:
68 - 73 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 98 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 0 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Mash Chemistry and Brewing Water Calculator
 
Notes

Heat strike water to 166 (it should drop to 154 when grain is added)
Add strike water to bagged mash tun-stir in grains for 5 mins

Screw on lid and let sit for 1 hour.

Heat sparge water to 170

Using pulley, pull grain bag from mash tun to drain-squeeze bag w/ gloves

lower bag into sparge bucket-stir for 5 mins, then let soak for 30 mins. Repeat pulley process.

Add first and second runnings to kettle-heat to boiling. Make note of pre-boil water level.

Add hops according to schedule. When boil is complete, make note of post-boil water level.

Recipe Picture
Last Updated and Sharing
 
240
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2019-08-04 12:51 UTC
NEW Water Requirements:
Pale Ale
Equipment Profile Used

System Default

Close
Print
Water Requirements:
Pale Ale
Close
Print
Recipe Cost $ (USD)
Recipe costs can be adjusted by changing the batch size. They won't be saved but will give you an idea of costs if your final yield was different.
Gallons
Cost $ Cost %
Fermentables $
Steeping Grains
(Extract Only)		 $
Hops $
Yeast $
Other $
Cost Per Barrel $ 0.00
Cost Per Pint $ 0.00
Total Cost $ 0.00
Ok
Discussion about this recipe:
You must be logged in to add comments.

If you do not yet have an account, you may register here.

Back To Top
Want no ads? Go Premium and unlock all our brewing tools!
Copyright © 2007-2024 Brewer's Friend, Inc. - Send Feedback - Terms - RSS Feed - Do Not Sell or Share My Personal Information