Hops
Amount
|
Variety
|
Cost
|
Type
|
AA
|
Use
|
Time
|
IBU
|
Bill %
|
20 g |
Mosaic20 g Mosaic Hops |
|
Pellet |
11.8 |
Boil
|
60 min |
26.37 |
10.8% |
40 g |
Mosaic40 g Mosaic Hops |
|
Pellet |
11.8 |
Boil
|
5 min |
10.52 |
21.6% |
30 g |
Cascade30 g Cascade Hops |
|
Pellet |
7.2 |
Boil
|
5 min |
4.81 |
16.2% |
20 g |
Mosaic20 g Mosaic Hops |
|
Pellet |
11.8 |
Dry Hop
|
5 days |
|
10.8% |
35 g |
Cascade35 g Cascade Hops |
|
Pellet |
7.2 |
Dry Hop
|
5 days |
|
18.9% |
20 g |
Mosaic20 g Mosaic Hops |
|
Pellet |
11.8 |
Dry Hop
|
3 days |
|
10.8% |
20 g |
Cascade20 g Cascade Hops |
|
Pellet |
7.2 |
Dry Hop
|
3 days |
|
10.8% |
185 g
/ $ 0.00
|
Hops Summary
Amount
|
Variety
|
Cost
|
IBU
|
Bill %
|
100 g |
Mosaic (Pellet) 100 g Mosaic (Pellet) Hops |
|
36.89 |
54% |
85 g |
Cascade (Pellet) 85 g Cascade (Pellet) Hops |
|
4.81 |
45.9% |
185 g
/ $ 0.00
|
Mash Guidelines
Amount
|
Description
|
Type
|
Start Temp
|
Target Temp
|
Time
|
20 L |
Enzymatic conversion |
Temperature |
-- |
67 °C |
60 min |
|
Infusion |
Infusion |
-- |
76 °C |
10 min |
12 L |
Flysparge |
Fly Sparge |
-- |
76 °C |
30 min |
Starting Mash Thickness:
3 L/kg
|
Target Water Profile
Balanced Profile
Notes
https://beerco.com.au/collections/all-grain/products/fall-over-ipa-beerco-recipe-kit
Method:
Fill clean Kettle with 21 litres of water and pre-boil your water to precipitate our chlorides and chloramines. Add Mash Salts – 10g or 2 tsp of Calcium Sulphate (Gypsum) and 5g or 1 tsp of Calcium Carbonate<br />
Mill the grains and dough-in targeting a mash of around 3 Litres of water to 1 Kg of grain (a liquor-to-grist ratio of about 3:1 by weight) and a mash temperature of 67 °C (152 °F).<br />
Hold the mash at 67 °C ( 152 °F ) until enzymatic conversion is complete for around 45 minutes to 1 hour.<br />
Infuse the mash with near boiling water while stirring or with a recirculating mash system raise the temperature to mash out at 76 °C (168 °F). Mash out for 10 minutes.<br />
Fly sparge slowly with 12 Litres of 76 °C (168 °F ) water, collecting wort until the pre-boil kettle volume is around 25 L (6.5 gallons).<br />
The total boil time will be 90 minutes. Bring to a rapid rolling boil and make first addition of 20g of Mosaic at 60 mins from end of boil.<br />
Deltafloc or Irish Moss is added with any yeast nutrients at 15 mins remaining on the boil.<br />
Make second addition of 40g of Mosaic and 30g of Cascade at 5 mins from end of boil.<br />
At flameout, cool wort to 19°C (67 °F ), decant starter or open Gold Pitch and pitch liquid GigaYeast or 2 x sachets of dry yeast into pre oxygenated wort.<br />
Over the course of the two-week fermentation, ramp the temperature slowly up to 22°C (72 °F ) to ensure full attenuation.<br />
On approximately Day 5-7 of fermentation when primary fermentation appears to be complete and secondary fermentation is appearing hit with your first dry hop of 20g of Mosaic and 35g of Cascade for 72 hours (3 days).<br />
Do a double dry hop of 20g of Mosaic and 35g of Cascade for a further 72 hours (3 days).<br />
After 2nd dry hop of 3 days, Cold crash, rack off into keg or bottling bucket for immediate carbonation or priming.<br />
Carbonate this beer to 2.5 volumes of CO2 and serve it #freshas. cheers!<br />
Last Updated and Sharing
- Public: Yup, Shared
- Last Updated: 2019-03-07 21:11 UTC
For quick copying and pasting to a text based forum or email.
Click the Download as HTML file button below.
Recipe costs can be adjusted by changing the batch size. They won't be saved but will give you an idea of costs if your final yield was different.
|
Cost $ |
Cost % |
Fermentables |
$ |
|
Steeping Grains (Extract Only) |
$ |
|
Hops |
$ |
|
Yeast |
$ |
|
Other |
$ |
|
Cost Per Barrel |
$ 0.00 |
|
Cost Per Pint |
$ 0.00 |
|
Total Cost |
$ 0.00 |
|
Discussion about this recipe:
Back To Top