Wrong'un Beer Recipe | All Grain American Wheat Beer | Brewer's Friend
Brew your best beer EVER. Save 10% on Brewer's Friend Premium today. Use code TAKE10. Sign Up ×

Wrong'un

172 calories 17.8 g 330 ml
Beer Stats
Method: All Grain
Style: American Wheat Beer
Boil Time: 60 min
Batch Size: 23 liters (fermentor volume)
Pre Boil Size: 27 liters
Post Boil Size: 24.5 liters
Pre Boil Gravity: 1.048 (recipe based estimate)
Post Boil Gravity: 1.052 (recipe based estimate)
Efficiency: 70% (brew house)
Source: Raffa
Calories: 172 calories (Per 330ml)
Carbs: 17.8 g (Per 330ml)
Created: Wednesday January 23rd 2019
Similar Recipes

AMERICAN WHEAT 2020

by THE ONE CERVEJARIA

OG: 1.050 FG: 1.009 ABV: 5.3% IBU: 27

Andy142 American Wheat

by Andy142

OG: 1.057 FG: 1.013 ABV: 5.8% IBU: 29

1.056
1.014
5.5%
32.7
4.3
5.5
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
3.60 kg New Zealand - Lager Light3.6 kg Lager Light 37 1.43 60%
1.80 kg New Zealand - Wheat Malt1.8 kg Wheat Malt 35.4 2.13 30%
0.30 kg New Zealand - Toffee Malt0.3 kg Toffee Malt 38.8 5.33 5%
0.30 kg New Zealand - Munich Malt0.3 kg Munich Malt 36.8 7.87 5%
6 kg / 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
15 g Pacific Jade15 g Pacific Jade Hops Pellet 13 Boil at 100 °C 60 min 22 31.9%
12 g Challenger12 g Challenger Hops Pellet 8.5 Boil at 100 °C 10 min 4.17 25.5%
20 g Wakatu20 g Wakatu Hops Pellet 7.5 Whirlpool at 100 °C 0 min 6.52 42.6%
47 g / 0.00
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
19.7 L Infusion -- 66 °C 60 min
14.6 L Sparge -- 75 °C --
Starting Mash Thickness: 3 L/kg
 
Other Ingredients
Amount Name Cost Type Use Time
5 g Gypsum Water Agt Mash 1 hr.
3 g Table Salt Water Agt Mash 1 hr.
5 g Lactic acid Water Agt Mash 1 hr.
 
Yeast
Mangrove Jack - Bavarian Wheat Yeast M20
Amount:
1 Each
Cost:
Attenuation (avg):
73%
Flocculation:
Low
Optimum Temp:
15 - 30 °C
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 111 B cells required
0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 2.45 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
80 5 25 75 80 100
Mash Chemistry and Brewing Water Calculator
 
Notes

This is a beer that went 'wrong'.
It came to brew day and I trusted the Grainfather for water quantities - the app had a bug at the time so there was too much water, especially in the sparge.
Then I found I didn't have any Cascade hops so I substituted Challenger; yes, I know, they have totally different characteristics!
When it came to the boil, it was boiling vigorously at 99 degrees - I discovered that the temperature probe wasn't fully in. So, what temperature did I mash at? I'm guessing 68, but it could be more.
OG was 1.051 but target was 1.056. Too much water.
FG was 1.020 (I suspect due to mash temperature).

The result?
Just over 4% alcohol with good mouthfeel.
Interestingly hopped - not too bitter but lovely earthy/grassy flavour.

Overall, an interesting beer that I really enjoy. But, it's a wrong'un.

Brewer's Friend Logo
Last Updated and Sharing
 
294
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2019-12-27 19:37 UTC
Discussion about this recipe:
You must be logged in to add comments.

If you do not yet have an account, you may register here.

Back To Top