Roger Rabbit Beer Recipe | Extract American Pale Ale | Brewer's Friend
Brew your best beer EVER. Save 10% on Brewer's Friend Premium today. Use code TAKE10. Sign Up ×

Roger Rabbit

163 calories 14.4 g 12 oz
Beer Stats
Method: Extract
Style: American Pale Ale
Boil Time: 60 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 7.5 gallons
Pre Boil Gravity: 1.037 (recipe based estimate)
Efficiency: 35% (steeping grains only)
Calories: 163 calories (Per 12oz)
Carbs: 14.4 g (Per 12oz)
Created: Wednesday September 5th 2018
1.050
1.009
5.3%
44.9
5.8
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
7.50 lb Liquid Malt Extract - Light7.5 lb Liquid Malt Extract - Light 35 4 88.2%
7.50 lbs / 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
1 lb American - Caramel / Crystal 10L1 lb Caramel / Crystal 10L 35 10 11.8%
0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1 oz Centennial1 oz Centennial Hops Pellet 10 Whirlpool 90 min 16.34 16.7%
1 oz Belma1 oz Belma Hops Pellet 9.4 Whirlpool 90 min 15.36 16.7%
1 oz Centennial1 oz Centennial Hops Pellet 10 Whirlpool at 185 °F 60 min 5.45 16.7%
1 oz Belma1 oz Belma Hops Pellet 9.4 Whirlpool at 185 °F 60 min 5.12 16.7%
1 oz Centennial1 oz Centennial Hops Pellet 10 Whirlpool at 160 °F 30 min 1.36 16.7%
1 oz Belma1 oz Belma Hops Pellet 9.4 Whirlpool at 160 °F 30 min 1.28 16.7%
6 oz / 0.00
 
Yeast
Fermentis - Safale - American Ale Yeast US-05
Amount:
1 Each
Cost:
Attenuation (avg):
81%
Flocculation:
Medium
Optimum Temp:
54 - 77 °F
Starter:
No
Fermentation Temp:
66 °F
Pitch Rate:
-
0.00 Yeast Pitch Rate and Starter Calculator
 
Target Water Profile
Light colored and hoppy
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
75 5 10 50 150 0
approximation - water calc done using Bru'n Water
 
Notes

Hoppy! All hops added late. Twin adds done 3 times. First add at KO. Second add when kettle temp reaches 185. Third add is made when kettle has cooled to about 160. All hops are left in kettle. Times shown are guesses. Not sure how long it will take for kettle to cool to these temp points.

IBU calculations are guesses. Don't know how much isomerization will occur, but I used utilization % to approximate the decreasing isomerization with temp.

This is an experiment in hopping. The goal is moderate bitterness and maximum hop flavor/aroma. Hops are left in the kettle, which is whirlpooled periodically during cooling. Wort is drawn through chiller into carboy once kettle reaches 140, or 30 minutes after third hop add.

Using fridge with controller for fermentation temp control. Will pitch with wort and yeast temp at about 80, and then put carboy in fridge at 66.

Brewer's Friend Logo
Last Updated and Sharing
 
226
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2018-09-05 18:47 UTC
Discussion about this recipe:
You must be logged in to add comments.

If you do not yet have an account, you may register here.

Back To Top