5am Saint Beer Recipe | Extract American Amber Ale | Brewer's Friend
Brew your best beer EVER. Save 10% on Brewer's Friend Premium today. Use code TAKE10. Sign Up ×

5am Saint

146 calories 13.1 g 330 ml
Beer Stats
Method: Extract
Style: American Amber Ale
Boil Time: 60 min
Batch Size: 20 liters (fermentor volume)
Pre Boil Size: 25 liters
Pre Boil Gravity: 1.038 (recipe based estimate)
Efficiency: 70% (steeping grains only)
Source: Brewdog DIY Dog
Calories: 146 calories (Per 330ml)
Carbs: 13.1 g (Per 330ml)
Created: Saturday July 14th 2018
1.048
1.009
5.1%
24.5
18.5
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
0 kg Dry Malt Extract - Amber0.0001 kg Dry Malt Extract - Amber 42 10 0%
0 kg / 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
0.38 kg American - Caramel / Crystal 150L0.38 kg Caramel / Crystal 150L 33 150 8.3%
0.13 kg New Zealand - Dark Crystal Malt0.13 kg Dark Crystal Malt 35.4 96.45 2.8%
0.88 kg United Kingdom - Cara Malt0.88 kg Cara Malt 35 17.5 19.2%
0.63 kg United Kingdom - Munich0.63 kg Munich 37 6 13.8%
2.56 kg Finland - Pale Ale Malt2.56 kg Pale Ale Malt 36 2 55.9%
0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
2.50 g Cascade2.5 g Cascade Hops Pellet 7 Boil 60 min 2.47 1.1%
2.50 g Amarillo2.5 g Amarillo Hops Pellet 8.6 Boil 60 min 3.03 1.1%
2.50 g Nelson Sauvin2.5 g Nelson Sauvin Hops Pellet 12.5 Boil 30 min 3.39 1.1%
12.50 g Amarillo12.5 g Amarillo Hops Pellet 8.6 Boil 12 min 6.36 5.7%
12.50 g Nelson Sauvin12.5 g Nelson Sauvin Hops Pellet 12.5 Boil 12 min 9.24 5.7%
25 g Simcoe25 g Simcoe Hops Pellet 12.7 Dry Hop 6 days 11.4%
50 g Cascade50 g Cascade Hops Pellet 7 Dry Hop 6 days 22.7%
25 g Athanum25 g Athanum Hops Pellet 3.8 Dry Hop 6 days 11.4%
12.50 g Nelson Sauvin12.5 g Nelson Sauvin Hops Pellet 12.5 Dry Hop 6 days 5.7%
50 g Centennial50 g Centennial Hops Pellet 10 Dry Hop 6 days 22.7%
25 g Amarillo25 g Amarillo Hops Pellet 8.6 Dry Hop 6 days 11.4%
220 g / 0.00
 
Yeast
Fermentis - Safale - American Ale Yeast US-05
Amount:
1 Each
Cost:
Attenuation (avg):
81%
Flocculation:
Medium
Optimum Temp:
12 - 25 °C
Starter:
No
Fermentation Temp:
20 °C
Pitch Rate:
-
0.00 Yeast Pitch Rate and Starter Calculator
 
Notes

4.5kg grain so holds 4.5l water
4.5 x 3 means 14l mash water
Estimate 3l evaporation (in the end at least 5) over the hour so 18l boil vol
9.5l run off means 11.5 l sparge water

Strike water 72.7oC
Mash came to 62, where used calc in BF to aim for 65 ending with requirement of 71 strike. For future, add 4-5oC for a 15 l mash. Added 1.5l boiling water.

Mash finished at 62 after starting 65.6, 75 mins

Much higher efficiency than expected, 70% based on wort vol and gravity of 1.038. Had to up batch vol here!

No mash out on this one, just sparse at 78oC water. Could have increased this, didn’t monitor runnings T

After checking gravity of wort, found very high, so did another batch sparse to recover another 4l or so from the grain - still coming out at 1.025 but overall gravity of wort now at 1.038 so stopped, worried about astringency too (no taste of it in final runnings though)

Had to revert to dry yeast after starter too slow (start earlier than 2 days for recovered yeast!). 1 pack of US-05, added dry to wort. Going well when checked inside bucket 16hours after.

Very happy so far with brew, disappointed on yeast prep unrelated to this recipe now. Original recipe states Wyeast 1065. I had planned to use WLP001 recovered, but starter not ready in time. Replacement dry US05 - happy with fermentation progress morning after

Tested after 10 days, appeared not to be finished. After 16 - done. Add hops for 6 days then bottled.


Brewer's Friend Logo
Last Updated and Sharing
 
461
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2018-07-30 19:10 UTC
Discussion about this recipe:
You must be logged in to add comments.

If you do not yet have an account, you may register here.

Back To Top