Rocky Raccoon Honey Lager

A step infusion mash is employed to mash the grains. Add 6 quarts (5.7 L) of 140° F (60° C) water to the crushed grain, stir, stabilize, and hold the temperature at 132° F (56° C) for 30 minutes. Add 3 quarts (3 L) of boiling water and add heat to bring temperature up to 155° F (68° C) and hold for about 30 minutes. Then raise temperature to 167° F (75° C), lauter, and sparge with 3.5 gallons (13.5 L) of 170° F (77° C) water. Collect about 5.5 gallons (21 L) of runoff. Add 60-minute hops and bring to a full and vigorous boil.
The total boil time will be 60 minutes. When 10 minutes remain, add the Irish moss. After a total wort boil of 60 minutes, turn off the heat, stir in the honey, and place the pot (with cover on) in a running cold-water bath for 30 minutes, or use other methods to chill wort. Then strain and sparge the wort into a sanitized fermenter. Bring the total volume to 5 gallons (19 L) with additional cold water if necessary. Aerate the wort very well.
Pitch the yeast when temperature of wort is about 70° F (21° C). Once visible signs of fermentation are evident, ferment at a temperature around 55° F (12.5° C) for about one week, or until fermentation shows signs of calm and stopping. Rack from primary to secondary and add the hop pellets and optional Jasmine flowers for dry hopping. If you have the capability, “lager” the beer at temperatures between 35 and 45° F (1.5–7° C) for 3 to 6 weeks.