Pour 2 gallons of water into kettle. Proceed to add all DME to room temp water. Mix well.
Step grains at 152 for 30 minutes.
Remove grains. Put grains in a strainer and pour 1-1.5 gallons of water over grains into kettle.
Start boil and follow hop schedule. Use whirlfloc tablet at 15m. Add the hop stand / 0 minute hops once the wort cools to 180 degrees.
I ferment for 28 days, putting the dryhop addition in on day 23.
Recipe Photos
Last Updated and Sharing
482
Views
0
Brews
Public: Yup, Shared
Last Updated: 2018-02-10 18:44 UTC
For quick copying and pasting to a text based forum or email.
Click the Download as HTML file button below.
Paste the following into your website / publishing platform:
* The height/width of the iframe can be set as a percentage of the container
(width="95%"), or in pixels (width="500px").
Looks good at any width above 320px.
Updates to the recipe automatically flow through.
The recipe's view count is incremented when someone views the recipe at your site!
Embedded recipes appear with no ads.
NEW Water Requirements:
Spiral Galaxy IPA Batch 2
Equipment Profile Used
System Default
Close
Print
Water Requirements:
Spiral Galaxy IPA Batch 2
Close
Print
Recipe Cost
$ (USD)
Recipe costs can be adjusted by changing the batch size. They won't be saved but will give you an idea of costs if your final yield was different.
Gallons
Cost $
Cost %
Fermentables
$
Steeping Grains (Extract Only)
$
Hops
$
Yeast
$
Other
$
Cost Per Barrel
$0.00
Cost Per Pint
$0.00
Total Cost
$0.00
Ok
Discussion about this recipe:
You must be logged in to add comments.
If you do not yet have an account, you may register here.