View Recipe

Recipe Tools ▼
- Brew!
- Copy
- Label Generator
- Quick Water Requirements
- Add To
  Shopping List
Export ▼
- Embed
- Text
- HTML
- BeerXML
Print

Uhtred's 2015 IPA

Method: Extract
Style: American IPA
Boil Time: 60 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 2.25 gallons
Pre Boil Gravity: 1.111 (recipe based estimate)
Efficiency: 50% (steeping grains only)
Rating:

4.00 (1 Review)

Calories: 165 calories (Per 12oz)
Carbs: 17.5 g (Per 12oz)

Created: Tuesday March 17th 2015

Original Gravity:

1.050

Final Gravity:

1.013

ABV (standard):

4.9%

IBU (tinseth):

30.8

SRM (morey):

11.8

Mash pH

n/a

Cost $

n/a

Want no ads? Go Premium and unlock all our brewing tools!

Fermentables

Amount	Fermentable	PPG	°L	Bill %
1.80 lb	Dry Malt Extract - Light1.8 lb Dry Malt Extract - Light	42	4	23.1%
4 lb	Liquid Malt Extract - Light4 lb Liquid Malt Extract - Light	35	4	51.3%
5.80 lbs / $ 0.00

Steeping Grains

Amount	Fermentable	PPG	°L	Bill %
1 lb	United Kingdom - Carastan (30/37)1 lb Carastan (30/37)	35	34	12.8%
1 lb	United Kingdom - Crystal 45L1 lb Crystal 45L	34	45	12.8%
$ 0.00

Hops

Amount	Variety	Type	AA	Use	Time	IBU	Bill %
8 g	Northern Brewer8 g Northern Brewer Hops	Pellet	10.5	Boil	60 min	6.5	7.8%
25 g	Perle25 g Perle Hops	Pellet	8.7	Boil	60 min	16.83	24.3%
28 g	Cascade28 g Cascade Hops	Pellet	6.9	Boil	15 min	7.42	27.2%
21 g	Cascade21 g Cascade Hops	Pellet	6.9	Aroma	0 min		20.4%
21 g	Cascade21 g Cascade Hops	Pellet	6.9	Dry Hop	0 days		20.4%
103 g / $ 0.00

Show Summary View

Amount	Variety	IBU	Bill %
8 g	Northern Brewer (Pellet) 8 g Northern Brewer (Pellet) Hops	6.5	7.8%
25 g	Perle (Pellet) 25 g Perle (Pellet) Hops	16.83	24.3%
70 g	Cascade (Pellet) 70 g Cascade (Pellet) Hops	7.42	68%
103 g / $ 0.00

Other Ingredients

Amount	Name	Cost	Type	Use	Time
1 tsp	Irish moss		Fining	Boil	15 min.

Yeast

Wyeast - American Ale 1056

Amount:	1 Each	Cost:
Attenuation (avg):	75%	Flocculation:	Med-Low
Optimum Temp:	60 - 72 °F	Starter:	No
Fermentation Temp:	68 °F	Pitch Rate:	0.35 (M cells / ml / ° P) 82 B cells required

$ 0.00 Yeast Pitch Rate and Starter Calculator

Priming

Method: Dextrose Amount: 1 cup

Target Water Profile

Balanced Profile

Ca⁺²	Mg⁺²	Na⁺	Cl^-	SO₄^-2	HCO₃^-
80	5	25	75	80	100

Notes

Steep grains in 3 qt tap H2O. at 160/150 (actually ran temp up to 170 on accident according to thermometer, though this candy thermo appears to register 10F high).

Boil size app 2.25 gallons, ought to be 2.4 per recipe (need bigger kettle), added DME near boiling point. Accidentally tossed in some of the flavoring hops at 60 minutes, not off to the best start.

Added flavoring hops and Irish moss and extract at 15 minutes.

Aroma hops as the pot was put into iced sink. Pitched the malt "tea" directly into the primary, did not add to boil as suggested in recipe - would probably have overflowed.

Pitched yeast at about 78F, put in Anny's room.

OG 1.044

Removed from Anny's room following day, put next to wall heater, maintained about 70F, rotating bucket. Kept in primary 4 days, racked to secondary, moved to tool room, app 65F.

Dry hopped in a cheesecloth dangling from the airlock, for two days, removed sack.

Bottled on April 24. Wort is amazing. Unfortunately, only 4.5 gallons, or 26 bottles.

Last Updated and Sharing

1,162

Views

Brews

Public: Yup, Shared
Last Updated: 2015-08-20 23:24 UTC

Recipe costs can be adjusted by changing the batch size. They won't be saved but will give you an idea of costs if your final yield was different.

Cost for

Gallons

Cost by

Final Yield

	Cost $	Cost %
Fermentables	$
Steeping Grains (Extract Only)	$
Hops	$
Yeast	$
Other	$
Cost Per Barrel	$ 0.00
Cost Per Pint	$ 0.00
Total Cost	$ 0.00

Discussion about this recipe:

You must be logged in to add comments.

If you do not yet have an account, you may register here.

Uhtred Bebbanburg • 08/20/2015 at 11:24pm

4 of 5

This was adopted from a Sierra Nevada clone, and I am quite happy with the end results. It was not as crisp as I'd expected, especially the aroma, which didn't leap out and welcome my nose, no matter what temperature nor glass was used for serving. Might try dry-hopping a little later in secondary, and leaving them in a touch longer. Or perhaps dropping the pellets into the carboy for a few days and then filtering. Other than that, balance between malt and hops was nice, and the beer was notably stronger than indicated (would be nice if we could input actual gravity readings).

Want no ads? Go Premium and unlock all our brewing tools!