Logan's Lurch - San Diego IPA Beer Recipe | All Grain American IPA by armchairprotester | Brewer's Friend

Logan's Lurch - San Diego IPA

204 calories 18.5 g 12 oz
brewer logo
Beer Stats
Method: All Grain
Style: American IPA
Boil Time: 60 min
Batch Size: 11 gallons (fermentor volume)
Pre Boil Size: 13 gallons
Efficiency: 70% (brew house)
Source: sb
Calories: 204 calories (Per 12oz)
Carbs: 18.5 g (Per 12oz)
Created: Wednesday September 19th 2012
1.062
1.012
6.6%
74.0
7.6
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
22 lb American - Pale 2-Row22 lb Pale 2-Row 37 1.8 81.5%
2 lb American - Caramel / Crystal 30L2 lb Caramel / Crystal 30L 34 30 7.4%
1.50 lb American - Carapils (Dextrine Malt)1.5 lb Carapils (Dextrine Malt) 33 1.8 5.6%
1.50 lb American - Munich - Light 10L1.5 lb Munich - Light 10L 33 10 5.6%
27 lbs / 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
2 oz Chinook2 oz Chinook Hops Pellet 13 Boil 60 min 20%
3 oz Cascade3 oz Cascade Hops Pellet 7 Boil 30 min 30%
2 oz Willamette2 oz Willamette Hops Pellet 4.5 Boil 5 min 20%
3 oz Cascade3 oz Cascade Hops Pellet 7 Dry Hop 7 days 30%
10 oz / 0.00
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
30 Sparge Water @ 170 F Fly Sparge -- 152 °F 75 min
 
Yeast
White Labs - American Ale Yeast Blend WLP060
Amount:
1 Each
Cost:
Attenuation (custom):
80%
Flocculation:
Medium
Optimum Temp:
68 - 72 °F
Starter:
No
0.00 Yeast Pitch Rate and Starter Calculator
 
Target Water Profile
Custom English IPA
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
185 27 108 87 354 294
ADD
4.0 tsp (7.0g) CaCO3 (Chalk - Calcium Carbonate)
1.5 tsp (6.5g) NaHCO3 (Baking Soda)
0.0 tsp (0.0g) CaCl2 (Calcium Chloride)
1.0 tsp (4.5g) MgSO4 (Epsom Salt)
0.0 tsp (0.0g) NaCl (Canning Salt - NO IODINE)
Mash Chemistry and Brewing Water Calculator
 
Notes

USE 3 vials of Yeast (1.5 vials per carboy)

Primary Fermentation: 7days @ 68f
Secondary Fermentation: 7days @ 68f
Additional Fermentation: 7 days keg conditioned while force carbonating

Addition of salts to SD Alvarado Water will increase bitterness
Sulphate : Chloride ratio : highly bitter
Alkalinity and SRM good for dark beer (150-300 ppm Alkalinity)
Estimated pH = 5.96
residual alkalinity = 93.12

Brewer's Friend Logo
Last Updated and Sharing
 
1,149
Views
1
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2012-09-19 21:13 UTC
Discussion about this recipe:
You must be logged in to add comments.

If you do not yet have an account, you may register here.

Back To Top