Lutra™ Kveik Helles Pseudo-Lager Recipe Beer Recipe | All Grain Munich Helles | Brewer's Friend
Brew your best beer EVER. Save 10% on Brewer's Friend Premium today. Use code TAKE10. Sign Up ×

Lutra™ Kveik Helles Pseudo-Lager Recipe

175 calories 17.9 g 12 oz
Beer Stats
Method: All Grain
Style: Munich Helles
Boil Time: 60 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 7 gallons
Post Boil Size: 1.5 gallons
Pre Boil Gravity: 1.042 (recipe based estimate)
Post Boil Gravity: 1.195 (recipe based estimate)
Efficiency: 70% (brew house)
Source: Larry Kitchell
Calories: 175 calories (Per 12oz)
Carbs: 17.9 g (Per 12oz)
Created: Thursday April 29th 2021
Similar Recipes

Rasen Mähen

by Rothrock Brewing Company

OG: 1.049 FG: 1.011 ABV: 5.0% IBU: 17

1.053
1.013
5.2%
20.0
2.9
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
11 lb Bestmalz - BEST Heidelberg11 lb BEST Heidelberg 38 1.3 100%
11 lbs / 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1 oz Perle1 oz Perle Hops Pellet 7 Boil 30 min 20.01 100%
1 oz / 0.00
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
-- -- 75 min
Priming
CO2 Level: 2.25 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
I'd recommend 7 gallons of spring water. Or for me my local tap hard water supplemented with Gypsum and Calcium Chloride in mash. 1 tbsp. of each

Note:
Very rapid boil if you only do 60 min on pilsner
Mash Chemistry and Brewing Water Calculator
 
Notes

Directions
Bring 2 gallons of water to boiling in a smaller vessel. In your mash vessel, bring 6 gallons of water to 130°F, add grain for a target temperature of 125°F, and leave for 15 minutes. While stirring, add up to 2 gallons of boiling water until reaching target mash temperature of 147°F. Hold mash temp for 75 minutes. Recirculate mash until wort is free from large amounts of grain. Drain off wort into boil kettle for approximately 7.25 gallons (sparge as needed for a boil gravity of ~1.043). Boil for 90 minutes, adding hops as noted above. Pitch yeast as directed. For clarity, fine as desired or cold condition beer at 34°F for 1-2 weeks.

Note: The initial protein rest is recommended, but can be skipped if necessary. In this case, add 8 gallons of water at 150°F to grain for a target mash temperature of 147°F and hold for 75 minutes.

Recipe Picture
Last Updated and Sharing
 
622
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2021-05-10 14:28 UTC
Discussion about this recipe:
You must be logged in to add comments.

If you do not yet have an account, you may register here.

Back To Top