Method:All Grain Style:Specialty IPA: New England IPA Boil Time:90 min Batch Size:23 liters
(fermentor volume) Pre Boil Size:37.83 liters Post Boil Size:30.32 liters Pre Boil Gravity:1.074
(recipe based estimate)
Post Boil Gravity:1.092
(recipe based estimate)
Efficiency: 75%
(brew house) Source:Wolf Pack Brewing Hop Utilization:85% Calories:1 calories
(Per 1.25ml)
Carbs:0.1 g
(Per 1.25ml)
This homebrew-size recipe is based on the fast-selling triple IPA from Reuben’s Brews. Emphasize yeast health with a big starter, generously dry hop, then give it enough time to cold condition.
Adjust your water profile to ensure a mash pH of 5.3 and a chloride-to-sulfate ratio of 3:1. Mash the grains at 148°F (64°C) for 60 minutes. Vorlauf until the runnings are clear, then run off into the kettle. Sparge the grains and top up as necessary to obtain 6 gallons (22.7 liters) of wort—or more, depending on your evaporation rate. Boil for 60 minutes, adding the corn sugar and hops according to the schedule. Whirlpool for 10 minutes.
After the boil, chill the wort to about 67°F (19°C). Aerate the wort and pitch a big, healthy yeast starter. Ferment at 69°F (21°C). After primary fermentation is complete, add the dry hops for three days. Ensure a full diacetyl rest in case of refermentation—if possible, test for VDK levels (see “Hunting for Diacetyl,” beerandbrewing.com). Crash to 38°F (3°C) or lower for at least a week, then package and carbonate.
Recipe Photos
Last Updated and Sharing
2,443
Views
0
Brews
Public: Yup, Shared
Last Updated: 2020-11-25 19:20 UTC
For quick copying and pasting to a text based forum or email.
Click the Download as HTML file button below.
Paste the following into your website / publishing platform:
* The height/width of the iframe can be set as a percentage of the container
(width="95%"), or in pixels (width="500px").
Looks good at any width above 320px.
Updates to the recipe automatically flow through.
The recipe's view count is incremented when someone views the recipe at your site!
Embedded recipes appear with no ads.
NEW Water Requirements:
Reuben's Triple Crush Clone
Equipment Profile Used
System Default
Close
Print
Water Requirements:
Reuben's Triple Crush Clone
Close
Print
Recipe Cost
$ (NZD)
Recipe costs can be adjusted by changing the batch size. They won't be saved but will give you an idea of costs if your final yield was different.
Gallons
Cost $
Cost %
Fermentables
$
Steeping Grains (Extract Only)
$
Hops
$
Yeast
$
Other
$
Cost Per Barrel
$0.00
Cost Per Pint
$0.00
Total Cost
$0.00
Ok
Discussion about this recipe:
You must be logged in to add comments.
If you do not yet have an account, you may register here.