Brendan's Black Porter Beer Recipe | Extract Oatmeal Stout | Brewer's Friend
Brew your best beer EVER. Save 10% on Brewer's Friend Premium today. Use code TAKE10. Sign Up ×

Brendan's Black Porter

164 calories 18.1 g 330 ml
brewer logo
Beer Stats
Method: Extract
Style: Oatmeal Stout
Boil Time: 60 min
Batch Size: 19 liters (fermentor volume)
Pre Boil Size: 11 liters
Post Boil Size: 10 liters
Pre Boil Gravity: 1.091 (recipe based estimate)
Post Boil Gravity: 1.100 (recipe based estimate)
Efficiency: 75% (steeping grains only)
Source: Redcal
Calories: 164 calories (Per 330ml)
Carbs: 18.1 g (Per 330ml)
Created: Friday July 31st 2020
1.053
1.015
5.0%
0.0
34.1
n/a
n/a
Want no ads? Go Premium and unlock all our brewing tools!
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
3 kg Liquid Malt Extract - Light3 kg Liquid Malt Extract - Light 35 4 83.9%
125 g Invert Sugar Syrup125 g Invert Sugar Syrup 36 1 3.5%
3.13 kg / $ 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
150 g Crisp Malting - Black150 g Black 34.5 600 4.2%
150 g Crisp Malting - Pale Chocolate150 g Pale Chocolate 32.7 220 4.2%
150 g United Kingdom - Roasted Barley150 g Roasted Barley 29 550 4.2%
$ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
60 g Styrian Goldings60 g Styrian Goldings Hops Lupulin Pellet 5.5 Boil 0 min 100%
60 g / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
6.70 tsp Whirlfloc Water Agt Boil 0 min.
25 g oatmeal Flavor Boil 15 min.
 
Yeast
Danstar - American West Coast Yeast BRY-97
Amount:
1 Each
Cost:
Attenuation (avg):
72%
Flocculation:
High
Optimum Temp:
17 - 24 °C
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 87 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: InvertSugar       Amount: 135.3 g       Temp: 20 °C       CO2 Level: 2.2 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
48.6 26 80 113 79.1 220
 
Notes
  1. Sterilize all equipment
  2. Heat 5 litres of water to 68degC
    3.Place cracked steeping grains in cheese cloth and tie
  3. Gently drop in 68degC water and steep for 30 minutes
  4. Lift out gently with a tongs and gently rinse off with 68degC water from teakettle. Taste malted liquid at this point.
  5. Place Malt buckets/pouches in hot water to soften
  6. Add Malt extract, and sugar, then allow to mix. Stir if needed but do not aerate.
  7. Add as much water as possible to container/boil pot size, Turn up heat and get a rolling boil.
  8. Add Hops loose to boil. Add other ingredients such as coffee and cocoa.
  9. Boil for 60 min, add whirlfloc 5 min before end of boil.
  10. Cool to <24degC and Pitch Yeast
  11. Sample for hydrometer SG reading. Should be about 1.050
  12. Seal bucket with lid and bubble seal (fill 1/3 with water)
  13. Ferment for 14 days at 21-22degC, or until FG = <1.013
  14. Prepare priming sugar for batch priming and add to bottling bucket
  15. Transfer from Fermenter to bottling container to clear, leave Trub behind.
  16. Bottle and leave for 2 weeks for secondary fermentation



Brewer's Friend Logo
Last Updated and Sharing
 
284
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2020-07-31 15:40 UTC
NEW Water Requirements:
Brendan's Black Porter
Equipment Profile Used

System Default

Close
Print
Water Requirements:
Brendan's Black Porter
Close
Print
Recipe Cost $ (USD)
Recipe costs can be adjusted by changing the batch size. They won't be saved but will give you an idea of costs if your final yield was different.
Gallons
Cost $ Cost %
Fermentables $
Steeping Grains
(Extract Only)		 $
Hops $
Yeast $
Other $
Cost Per Barrel $ 0.00
Cost Per Pint $ 0.00
Total Cost $ 0.00
Ok
Discussion about this recipe:
You must be logged in to add comments.

If you do not yet have an account, you may register here.

Back To Top
Want no ads? Go Premium and unlock all our brewing tools!
Copyright © 2007-2024 Brewer's Friend, Inc. - Send Feedback - Terms - RSS Feed - Do Not Sell or Share My Personal Information