Beer Gear's irish Stout / Updated - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Beer Gear's irish Stout / Updated

155 calories 17 g 12 oz
brewer logo
Beer Stats
Method: Extract
Style: Dry Stout
Boil Time: 60 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 3 gallons
Pre Boil Gravity: 1.079 (recipe based estimate)
Efficiency: 35% (steeping grains only)
Source: Beer Gear / Todd Branstner
Calories: 155 calories (Per 12oz)
Carbs: 17 g (Per 12oz)
Created: Friday August 9th 2019
1.047
1.013
4.5%
0.0
27.0
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
6 lb Briess - LME Golden Light6 lb LME Golden Light 37.6 4 85.7%
6 lbs / $ 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
0.50 lb Crisp Malting - Crystal 60L0.5 lb Crystal 60L 33.1 60 7.1%
0.25 lb Crisp Malting - Black0.25 lb Black 34.5 600 3.6%
0.25 lb United Kingdom - Roasted Barley0.25 lb Roasted Barley 29 550 3.6%
$ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1 oz Cluster1 oz Cluster Hops Pellet 6.5 Boil 0 min 100%
1 oz / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
9 g Burton Water Salts Water Agt Mash 0 min.
 
Yeast
Danstar - Windsor Ale Yeast
Amount:
1 Each
Cost:
Attenuation (avg):
72%
Flocculation:
Medium
Optimum Temp:
64 - 70 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 77 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 1.65 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 6.17 g | 24.7 qt) 2.63 10.5  
Mash volume with grains (equipment estimates 6.17 g | 24.7 qt) 2.71 10.8  
Grain absorption losses (steeping) -0.13 -0.5  
Volume increase from sugar/extract (early additions) 0.49 2  
Pre boil volume (equipment estimates 6.54 g | 26.2 qt) 3 12  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.04 -0.2  
Post boil volume 5 20  
Going into fermentor 5 20  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 2.63 10.5
Equipment Profile Used: System Default
 
Notes

This is a recipe from a homebrew shop that used to be in Lansing, Michigan, and it sold it's own prepackaged recipe kits often brewed with hopped canned extract. This is a translation to the products currently available at our shop.

Last Updated and Sharing
 
335
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2019-08-09 22:43 UTC