Amount | Fermentable | Cost | PPG | °L | Bill % |
---|---|---|---|---|---|
3 lb | Briess - DME Bavarian Wheat | 44.6 | 3 | 29.1% | |
3 lb | Briess - DME Pilsen Light | 45 | 2 | 29.1% | |
3.30 lb | Briess - LME Rye | 34.5 | 9 | 32% | |
9.30 lbs / $ 0.00 |
Amount | Fermentable | Cost | PPG | °L | Bill % |
---|---|---|---|---|---|
0.50 lb | American - Smoked Malt | 37 | 5 | 4.9% | |
0.50 lb | BSG - Flaked White Wheat | 36 | 1.6 | 4.9% | |
$ 0.00 |
Amount | Variety | Cost | Type | AA | Use | Time | IBU | Bill % |
---|---|---|---|---|---|---|---|---|
0.25 oz | Galena | Pellet | 15.5 | Boil | 30 min | 9.71 | 12.5% | |
0.25 oz | Galena | Pellet | 15.5 | Boil | 20 min | 7.65 | 12.5% | |
0.50 oz | Galena | Pellet | 15.5 | Boil | 10 min | 9.16 | 25% | |
1 oz | Mosaic | Pellet | 10.9 | Boil | 1 min | 1.53 | 50% | |
2 oz / $ 0.00 |
Amount | Name | Cost | Type | Use | Time |
---|---|---|---|---|---|
0.25 g | Wyeast - Beer Nutrient | Water Agt | Primary | 0 min. |
- Norway-Persy | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||
$ 0.00 |
CO2 Level: 2.37 Volumes |
Water | Gallons | Quarts |
---|---|---|
Heat water added to kettle (equipment estimates 6.47 g | 25.9 qt) | 6.39 | 25.6 |
Mash volume with grains | 6.47 | 25.9 |
Grain absorption losses (steeping) | -0.13 | -0.5 |
Volume increase from sugar/extract (early additions) | 0.73 | 2.9 |
Pre boil volume (equipment estimates 7.08 g | 28.3 qt) | 7 | 28 |
Boil off losses | -1.5 | -6 |
Hops absorption losses (first wort, boil, aroma) | -0.08 | -0.3 |
Post boil volume | 5.5 | 22 |
Going into fermentor | 5.5 | 22 |
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ. | ||
Total: | 6.39 | 25.6 |
Equipment Profile Used: | System Default |