Munich Helles Lager- Spaten Clone - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Munich Helles Lager- Spaten Clone

171 calories 17 g 12 oz
brewer logo
Beer Stats
Method: Extract
Style: Munich Helles
Boil Time: 60 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 6 gallons
Post Boil Size: 4.5 gallons
Pre Boil Gravity: 1.043 (recipe based estimate)
Post Boil Gravity: 1.058 (recipe based estimate)
Efficiency: 35% (steeping grains only)
Source: BF Shared recipe- 1/15/2009
Calories: 171 calories (Per 12oz)
Carbs: 17 g (Per 12oz)
Created: Wednesday May 29th 2019
1.052
1.012
5.3%
16.6
2.8
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
5.50 lb Briess - DME Pilsen Light5.5 lb DME Pilsen Light 45 2 84.6%
5.50 lbs / $ 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
1 lb German - Pilsner1 lb Pilsner 38 1.6 15.4%
$ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1.25 oz Hallertau Mittelfruh1.25 oz Hallertau Mittelfruh Hops Pellet 3.75 Boil 60 min 16.59 100%
1.25 oz / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
1 tsp Irish moss Fining Boil 15 min.
 
Yeast
White Labs - German Lager Yeast WLP830
Amount:
1 Each
Cost:
Attenuation (avg):
76.5%
Flocculation:
Medium
Optimum Temp:
50 - 55 °F
Starter:
Yes
Fermentation Temp:
50 °F
Pitch Rate:
1.5 (M cells / ml / ° P) 365 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 2.47 Volumes
 
Target Water Profile
Pilsen (Light Lager)
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
7 3 2 5 5 25
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
2 qt Partial Mash Steeping -- 152 °F 60 min
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 5.76 g | 23 qt) 5.71 22.9  
Mash volume with grains (equipment estimates 5.76 g | 23 qt) 5.79 23.2  
Grain absorption losses (steeping) -0.13 -0.5  
Volume increase from sugar/extract (early additions) 0.41 1.6  
Pre boil volume (equipment estimates 6.05 g | 24.2 qt) 6 24  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.05 -0.2  
Post boil volume 4.5 18  
Top off amount 0.5 2  
Going into fermentor 5 20  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 6.21 24.9
Equipment Profile Used: System Default
 
Notes

Made a 2qt starter...used 7.2Oz of Pilsen Light DME and stir plate for 24 hours at 73 degF. Pitched starter into 2L flask at 72 degF. Put starter flask in 55 degF refrigerator to allow yeast to settle. Decanted about 80% of liquid off of starter after letting it settle for about 3 hours.
Did a partial mash of 1 lb grain in 2 qt water for 60 minutes at 152degF. Sparged with 2 qt 170degF water.
Did a full boil of 6 gallons.









Last Updated and Sharing
 
1,039
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2019-08-22 16:52 UTC