No You!!! - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

No You!!!

216 calories 22.8 g 12 oz
brewer logo
Beer Stats
Method: Extract
Style: American IPA
Boil Time: 60 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 3 gallons
Post Boil Size: 1.5 gallons
Pre Boil Gravity: 1.108 (recipe based estimate)
Post Boil Gravity: 1.217 (recipe based estimate)
Efficiency: 35% (steeping grains only)
Calories: 216 calories (Per 12oz)
Carbs: 22.8 g (Per 12oz)
Created: Tuesday April 9th 2019
1.065
1.017
6.3%
65.9
6.8
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
6 lb Briess - DME Golden Light6 lb DME Golden Light 44.6 4 75%
1 lb Briess - DME Pilsen Light1 lb DME Pilsen Light 45 2 12.5%
7 lbs / $ 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
1 lb American - Caramel / Crystal 20L1 lb Caramel / Crystal 20L 35 20 12.5%
$ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1 oz Magnum1 oz Magnum Hops Pellet 12.7 Boil 60 min 28.59 20%
1 oz Ekuanot1 oz Ekuanot Hops Pellet 13.6 Boil 20 min 18.54 20%
1 oz Mosaic1 oz Mosaic Hops Pellet 10.1 Boil 20 min 13.77 20%
1 oz Ekuanot1 oz Ekuanot Hops Pellet 13.6 Boil 2 min 2.59 20%
1 oz Mosaic1 oz Mosaic Hops Pellet 12.5 Boil 2 min 2.38 20%
5 oz / $ 0.00
 
Yeast
Imperial Yeast - A24 Dry Hop
Amount:
1 Each
Cost:
Attenuation (custom):
74%
Flocculation:
Medium
Optimum Temp:
64 - 74 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 105 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: co2       Amount: 4.7oz       Temp: 66 °F       CO2 Level: 2.5 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 2.79 g | 11.1 qt) 2.6 10.4  
Mash volume with grains (equipment estimates 2.79 g | 11.1 qt) 2.68 10.7  
Grain absorption losses (steeping) -0.13 -0.5  
Volume increase from sugar/extract (early additions) 0.53 2.1  
Pre boil volume (equipment estimates 3.19 g | 12.8 qt) 3 12  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.19 -0.8  
Post boil volume 1.5 6  
Top off amount 3.5 14  
Going into fermentor 5 20  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 6.1 24.4
Equipment Profile Used: System Default
 
Notes

Brew date: 28-Apr2019

During the steeping grains the temp got up to about 175F ish (bc I forgot to monitor temp) so i removed flame and temp slowly dropped during the 20min to 150F ish

also, noticed lots of foam during the boil after adding the 20 and 2min hop additions (had to stir and regulate flame as to not boil over

OG: 1.062
lots of foam when added to ferment or from using the strainer so i didn’t airate to much.

Airlock bubbles started within the first 6hrs (temp was 70F) and went strong for about 1 day
Temp increased to about 72F on day 2 bubbling still going but slowed somewhat (bubble about every few seconds)

After about a week Temp settled around 66F and maintained for 3 weeks 4 days

Brought fermenter up from basement 1 day before bottling on 23-May, Temp 68-70F

24-May-2019
Primed with 4.6 oz of dextrose in 2 cups water
FG= 1.012
Abv: 6.6%

Taste:
very bitter, not in a bad way though. It’s good but next time maybe minus the 60 min addition and add a dry hop to make it more juicy

Last Updated and Sharing
 
226
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2020-01-24 03:27 UTC