Deschutes Mirror Pond Pale Ale (Clone) - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Deschutes Mirror Pond Pale Ale (Clone)

178 calories 18.1 g 12 oz
Beer Stats
Method: Extract
Style: American Pale Ale
Boil Time: 60 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 6 gallons
Pre Boil Gravity: 1.028 (recipe based estimate)
Efficiency: 35% (steeping grains only)
Source: BYO Dec 2016
Calories: 178 calories (Per 12oz)
Carbs: 18.1 g (Per 12oz)
Created: Wednesday September 26th 2018
1.054
1.013
5.3%
36.7
10.2
5.6
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
3.50 lb Maillard Golden Light LME3.5 lb Maillard Golden Light LME - (late boil kettle addition) 36 4 36.6%
4 lb Maillard Golden Light LME4 lb Maillard Golden Light LME 36 4 41.8%
7.50 lbs / 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
1.50 lb American - Caramel / Crystal 40L1.5 lb Caramel / Crystal 40L 34 40 15.7%
9 oz American - Carapils (Dextrine Malt)9 oz Carapils (Dextrine Malt) 33 1.8 5.9%
0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1.50 oz Cascade1.5 oz Cascade Hops Leaf/Whole 4.5 Boil 60 min 25.83 42.9%
0.50 oz Cascade0.5 oz Cascade Hops Leaf/Whole 4.5 Boil 30 min 6.62 14.3%
0.50 oz Cascade0.5 oz Cascade Hops Leaf/Whole 4.5 Boil 15 min 4.27 14.3%
0.50 oz Cascade0.5 oz Cascade Hops Leaf/Whole 4.5 Boil at 68 °F 0 min 14.3%
0.50 oz Cascade0.5 oz Cascade Hops Leaf/Whole 4.5 Dry Hop 7 days 14.3%
3.50 oz / 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
1 tsp Irish Moss Fining Primary 15 min.
 
Yeast
Fermentis - Safale - English Ale Yeast S-04
Amount:
1 Each
Cost:
Attenuation (avg):
75%
Flocculation:
High
Optimum Temp:
54 - 77 °F
Starter:
No
Fermentation Temp:
68 °F
Pitch Rate:
-
0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: Corn Sugar       Amount: 3/4 cup or 5 oz.       CO2 Level: 2.4 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
80 5 25 75 80 100
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 6.74 g | 27 qt) 5.92 23.7  
Mash volume with grains (equipment estimates 6.74 g | 27 qt) 6.09 24.4  
Grain absorption losses (steeping) -0.26 -1  
Volume increase from sugar/extract (early additions) 0.34 1.3  
Pre boil volume (equipment estimates 6.82 g | 27.3 qt) 6 24  
Volume increase from sugar/extract (late additions) 0.29 1.2  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.11 -0.5  
Post boil volume 5.5 22  
Going into fermentor 5.5 22  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 5.92 23.7
Equipment Profile Used: System Default
 
Notes

Used whole Cascade hops that Philip grew (2018) in Girdletree, MD.
Guessing Alpha Acid level as 4.5%.
Added additional .25 oz hops beyond exact recipe at 60 minutes to increase the IBUs a bit!
Added 1# additional LME to increase ABV from 4.5% to 5.2%. Recipe says 6# + Steeping grains should yield 5% ABV.
Priming sugar for 2.4 volumes CO2 based on 68 degF beer when bottling.
Hydrated dry yeast before pitching.
Split LME in halves and used one half in a late addition after the boil was completed. This effectively increaded the IBUs by about 8.

Last Updated and Sharing
 
414
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2018-10-31 15:39 UTC