Mosaic IPA Extract - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Mosaic IPA Extract

211 calories 20.4 g 12 oz
brewer logo
Beer Stats
Method: Extract
Style: American IPA
Boil Time: 60 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 7 gallons
Pre Boil Gravity: 1.050 (recipe based estimate)
Efficiency: 35% (steeping grains only)
Source: Brust
Calories: 211 calories (Per 12oz)
Carbs: 20.4 g (Per 12oz)
Created: Monday December 4th 2017
1.064
1.014
6.6%
67.3
7.4
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
9 lb Liquid Malt Extract - Light9 lb Liquid Malt Extract - Light 35 4 75%
9 lbs / $ 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
1 lb American - Caramel / Crystal 15L1 lb Caramel / Crystal 15L 35 15 8.3%
1 lb American - Carapils (Dextrine Malt)1 lb Carapils (Dextrine Malt) 33 1.8 8.3%
1 lb American - Vienna1 lb Vienna 35 4 8.3%
$ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1 oz Citra1 oz Citra Hops Pellet 11 Boil 60 min 37.96 20%
1 oz Citra1 oz Citra Hops Pellet 11 Boil 15 min 18.83 20%
1 oz Mosaic1 oz Mosaic Hops Pellet 12.5 Boil 5 min 8.6 20%
1 oz Mosaic1 oz Mosaic Hops Pellet 12.5 Boil 1 min 1.86 20%
1 oz Mosaic1 oz Mosaic Hops Pellet 12.5 Dry Hop 7 days 20%
5 oz / $ 0.00
 
Yeast
White Labs - California Ale Yeast WLP001
Amount:
1 Each
Cost:
Attenuation (avg):
76.5%
Flocculation:
Medium
Optimum Temp:
68 - 73 °F
Starter:
Yes
Fermentation Temp:
68 °F
Pitch Rate:
1.25 (M cells / ml / ° P) 408 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
 
Target Water Profile
Light colored and hoppy
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
75 5 10 50 150 0
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 6.76 g | 27 qt) 6.61 26.4  
Mash volume with grains (equipment estimates 6.76 g | 27 qt) 6.85 27.4  
Grain absorption losses (steeping) -0.38 -1.5  
Volume increase from sugar/extract (early additions) 0.76 3.1  
Pre boil volume (equipment estimates 7.15 g | 28.6 qt) 7 28  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.15 -0.6  
Post boil volume 5.5 22  
Going into fermentor 5.5 22  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 6.61 26.4
Equipment Profile Used: System Default
 
Notes


Size: 6 gal (post-boil)

Original Gravity: 1.066 (1.056 - 1.075)
Terminal Gravity: 1.012 (1.010 - 1.018)
Color: 5.0 (6.0 - 15.0)
Alcohol: 6.6% (5.5% - 7.5%)
Bitterness: 55 (40.0 - 70.0)

Boil for 60 minutes. Lid on at flameout, start chilling immediately.
Cool wort to 66F and aerate well. Ferment at 66-68F until complete.
Add dry hops once fermentation is nearing completion (ie: below 1.015). Dry hop for 7-10 days total.
Rack to brite tank (secondary), crash chill to near freezing (if possible), add 1 tsp of unflavoured gelatin dissolved in a cup of hot distilled water per 5 gallons of beer, and let clear for 2-3 days.
Package as you would normally. I keg and carbonate on the low side (around 2 to 2.2 volumes of C02) to minimize carbonic bite and let the hop/malt flavour come through.

Last Updated and Sharing
 
1,956
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2017-12-04 21:13 UTC