The color is considerably darker. Two decoctions: Decoction 1 for 20 minutes (1 liters) and decoction 2 for 10 minutes (1 liter).

Reduced the original boil from 90 minutes to 60 minutes. Also adjusted the gain as the effiency was 76% vs. originally planned 70%.

Had to add back 3 liters of water to hit 1.050 specific gravity after boil.

Einmaischen in 8,5 liter wasser 37°C
3 liter Dickmasche zeihen 10 min. bei 72°C rasten & 10 min 100°C
Zu brühen erbit 53°C anschließsen 10 min. rasten
2,4 liter Dickmasche ziehen, 10 min bei 72°C rasten & 10 min 100°C
Zu brühen ergibt 63°C anschließend 30 min rasten
2,9 liter Disckmasche ziehen 10 min. bei 72°C rasten & 19min 100°C
Zu brühen ergibt 72°C anschließend 30 min rasten
Abmaischen bei 72°C

A lager fermentation consists of these 3 phases:

primary fermentation : main fermentation of the fermentable extract. The bulk of the CO2 and alkohol are created here. Chill the beer to at/below pitching temperature, 9–10°C.
Pitch the yeast and wait 24–48 hours for fermentation to begin. Maintain the temperature for two weeks.

maturation : the yeast is allowed to clean up some of its byproducts like diacetyl (butterscotch flavor) and acetaldehyde (green apple flavor). After active fermentation slows, raise the temperature over several days to 18°C. Allow the beer to sit there for two or three days to clean up the diacetyl.

cold stabilization (lagering) : the low temperature causes haze forming proteins and polyphenols come out of solution and drop out of suspension. There is also a mellowing of flavors and some formation of esters happening. The latter becomes only significant after more than 12 weeks. Lower the temperature to 1°C to 2°C by reducing temp. 1°C per day.