Cit Haze - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Cit Haze

168 calories 15.5 g 330 ml
Beer Stats
Method: All Grain
Style: Specialty IPA: New England IPA
Boil Time: 60 min
Batch Size: 45 liters (fermentor volume)
Pre Boil Size: 48 liters
Post Boil Size: 46 liters
Pre Boil Gravity: 1.052 (recipe based estimate)
Post Boil Gravity: 1.055 (recipe based estimate)
Efficiency: 75% (brew house)
Source: Based on https://byo.com/article/neipa-style-profile/
Calories: 168 calories (Per 330ml)
Carbs: 15.5 g (Per 330ml)
Created: Monday October 17th 2022
1.055
1.011
5.8%
17.1
4.0
5.6
95.92
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
5 kg Simpsons - Finest Pale Ale Golden Promise5 kg Finest Pale Ale Golden Promise 3.22 / kg
16.10
37 2.4 45.5%
2 kg Flaked Wheat2 kg Flaked Wheat 2.28 / kg
4.56
34 2 18.2%
2 kg Joe White - Wheat Malt2 kg Wheat Malt 2.53 / kg
5.06
37.3 2.15 18.2%
2 kg United Kingdom - Malted Naked Oats2 kg Malted Naked Oats 6.90 / kg
13.80
33 1.3 18.2%
11 kg / 39.52
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
60 g Citra60 g Citra Hops 0.15 / g
9.00
Lupulin Pellet 22.8 Whirlpool at 80 °C 20 min 9.12 14.3%
120 g Centennial120 g Centennial Hops 0.08 / g
9.60
Pellet 10 Whirlpool at 80 °C 20 min 8 28.6%
120 g Citra120 g Citra Hops 0.15 / g
18.00
Lupulin Pellet 22.8 Dry Hop 3 days 28.6%
120 g Centennial120 g Centennial Hops 0.08 / g
9.60
Pellet 10 Dry Hop 3 days 28.6%
420 g / 46.20
 
Other Ingredients
Amount Name Cost Type Use Time
20 g Calcium Chloride (dihydrate) Water Agt Mash 1 hr.
6 g Gypsum Water Agt Mash 1 hr.
2 tsp Wyeast - Beer Nutrient Water Agt Boil 15 min.
 
Yeast
Lallemand - Verdant IPA
Amount:
1 Each
Cost:
5.70 / each
5.70
Attenuation (avg):
80%
Flocculation:
High
Optimum Temp:
18 - 23 °C
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 214 B cells required
Fermentis - Safale - American Ale Yeast US-05
Amount:
1 Each
Cost:
4.50 / each
4.50
Attenuation (avg):
81%
Flocculation:
Medium
Optimum Temp:
12 - 25 °C
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 214 B cells required
10.20 Yeast Pitch Rate and Starter Calculator
Priming
Method: co2       Amount: 1.11 bar       Temp: 3 °C       CO2 Level: 3 Volumes
 
Target Water Profile
Light colored and malty
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
75 1 6 110 40 0
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
40 L Strike -- 76 °C --
Infusion -- 68 °C 60 min
20 L Batch Sparge -- 77 °C 15 min
Quick Water Requirements
Water Liters
WARNING: Boil kettle capacity (45.4 L) exceeded. Volume required: 51.6 L. Suggest reducing initial water volume to 45.4 L and adding 6.2 L sparge/top-off.  
WARNING: Mash tun capacity exceeded. Volume required: 47.41 L. Suggest reducing strike water volume to 38.14 L and adding 2.01 L sparge/top-off. 40.2
Strike water volume at mash thickness of 3.7 L/kg 40.2
Mash volume with grains 47.4
Grain absorption losses -11
Remaining sparge water volume (equipment estimates 23.4 L) 19.8
Mash Lauter Tun losses -0.9
Pre boil volume (equipment estimates 51.6 L) 48
Boil off losses -5.7
Post boil Volume (equipment estimates 45.9 L) 46
Hops absorption losses (whirlpool, hop stand) -0.9
WARNING: Exceeded batch size - reduce boil size  
Going into fermentor (equipment estimates 45.1 L) 45
Total: 59.9  
Equipment Profile Used: System Default
 
Notes

Hazy Pale based on Garth Juice (https://www.brewersfriend.com/homebrew/recipe/view/1107934/garth-guice-42l-v2) but lowered ABV.

Since Last Time:

  • Replaced Pilsen Malt with Wheat Malt and reduced to lower ABV to ~5%
  • Replaced flaked oats with malted oats and increased to 2kg
  • Pumped up salt additions a little after dropping in last version
  • Halved bittering hops
    Overall aim is to lower ABV while retaining good mouthfeel and bitterness.

    Wet Hops:
  • add first wort hops to kettle after removing biab bag and wait until batch sparge is complete before firing up the kettle (this should give time for the hops to steep prior to boil)
  • add 0 minute hops at flameout (they stay in until end of whirlpool)
  • stir gently and allow to cool to ~80C
  • add other hops and hop-stand for 20 mins

    Dry Hops:
  • Mix dry hops and divide into 3 equal portions, add at:
    • 2 days after fermentation starts
    • end of fermentation
    • 3 days after end of fermentation
  • add dry hops at pressure using valve


    Fermentation:
  • Start at 18C and let naturally increase with ferment
  • Ferment at 10 psi (naturally increase pressure)
Last Updated and Sharing
 
186
Views
1
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2022-10-17 23:08 UTC