pumpkin milk stout 2022 - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

pumpkin milk stout 2022

367 calories 40.8 g 12 oz
Beer Stats
Method: All Grain
Style: Imperial Stout
Boil Time: 90 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 7 gallons
Post Boil Size: 5.5 gallons
Pre Boil Gravity: 1.086 (recipe based estimate)
Post Boil Gravity: 1.109 (recipe based estimate)
Efficiency: 52% (brew house)
Calories: 367 calories (Per 12oz)
Carbs: 40.8 g (Per 12oz)
Created: Thursday September 22nd 2022
Similar Recipes

Ballast Point Victory at sea

by Jared Kelly

OG: 1.101 FG: 1.025 ABV: 10.0% IBU: 55

VID SYANU DO DONU(From the San to the Don)

by Tim Bulin

OG: 1.093 FG: 1.014 ABV: 10.3% IBU: 59

Imperial Chocolate Stout

by Wade-C-Brew

OG: 1.098 FG: 1.024 ABV: 9.8% IBU: 57

1.109
1.032
10.1%
62.1
34.5
5.4
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
11 lb United Kingdom - Maris Otter Pale11 lb Maris Otter Pale 38 3.75 42.5%
1 lb Honey Malt1 lb Honey Malt 37 25 3.9%
1 lb Lactose (Milk Sugar)1 lb Lactose (Milk Sugar) 41 1 3.9%
2 lb Flaked Oats2 lb Flaked Oats 33 2.2 7.7%
3 lb American - Wheat3 lb Wheat 38 1.8 11.6%
45 oz Pumpkin (canned)45 oz Pumpkin (canned) 8 0 10.9%
1 lb American - Caramel / Crystal 40L1 lb Caramel / Crystal 40L 34 40 3.9%
0.25 lb German - Acidulated Malt0.25 lb Acidulated Malt 27 3.4 1%
5 oz American - Roasted Barley5 oz Roasted Barley 33 300 1.2%
8 oz Dingemans - Mroost 1400 MD (Debittered black malt)8 oz Mroost 1400 MD (Debittered black malt) 35 525 1.9%
3 lb Dry Malt Extract - Light3 lb Dry Malt Extract - Light 42 4 11.6%
25.87 lbs / 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1.50 oz Magnum1.5 oz Magnum Hops Pellet 15 Boil 60 min 62.12 100%
1.50 oz / 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
1 each vanilla bean Flavor Secondary 0 min.
6 g pumpkin spice Spice Boil 0 min.
 
Yeast
Fermentis - Safale - English Ale Yeast S-04
Amount:
3 Each
Cost:
Attenuation (avg):
75%
Flocculation:
High
Optimum Temp:
54 - 77 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 170 B cells required
0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 2.35 Volumes
 
Target Water Profile
henrico county va 23233 feb 2022
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
24 5 26 12 17 52
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
Infusion -- 152 °F 60 min
Starting Mash Thickness: 1.5 qt/lb
Quick Water Requirements
Water Gallons  Quarts
Strike water volume at mash thickness of 1.5 qt/lb 8.2 32.8  
Mash volume with grains 9.95 39.8  
Grain absorption losses -2.73 -10.9  
Remaining sparge water volume (equipment estimates 1.78 g | 7.1 qt) 1.47 5.9  
Mash Lauter Tun losses -0.25 -1  
Volume increase from sugar/extract (early additions) 0.31 1.2  
Pre boil volume (equipment estimates 7.31 g | 29.2 qt) 7 28  
Boil off losses -2.25 -9  
Hops absorption losses (first wort, boil, aroma) -0.06 -0.2  
Post boil Volume (equipment estimates 5 g | 20 qt) 5.5 22  
WARNING: Exceeded batch size - reduce boil size    
Going into fermentor (equipment estimates 5.5 g | 22 qt) 5 20  
Total: 9.67 38.7
Equipment Profile Used: System Default
 
Notes

========================
9/22/2022
i have 10 gall of pumpkin milkshake planned, for half of it i will add some DME and roasted grains to steep to make an imperial milk stout with pumpkin pumpkin spice vanilla bean and then, put it in the barrel with some rum.

since it will need more hops i will prob brew this cmpletely separate...? although all the grains are mixed up. maybe one mash and two boils...? not sure yet

========================
9/10/2022
bumping up the grain bill to get to 7%. changing to safale with higher expected efficiency. acid malt to proper mash ph. possibly will brew 10 gallons

========================
10/21/2021
measured FG of 1028. adjusting recipe attenuation from 71% to 65 so the recipe FG matches actual. came out to 4.8% abv but still tastes just as good, doesnt taste light in flavor or body at all.

still not sure why efficiency is so low on this beer (it was last year too). if you disregard the oats and pumpkin from the calculation it the efficiency is still low, under 60%. I would like to brew this to 8% some year but not sure what it would take for this beer (i.e. just a lot more base malt? how much? or go the DME route?)

This was the last beer I brewed on my old cooler mash tun and digiboil system. I've started using grainfather which so far has better and more consistent efficiency so it would be interesting to brew this same recipe on GF to see how much better it does.
========================
9/13/2021
updating for 2021. not sure what happened in terms of efficiency last year but this year i will be intentionally brewing it to 5% range for wifey. As alluded to below, I suspect the eff issue is oats and pumpkin not really contributing as much as this calculator thinks. I think I will just rebrew this thing exactly with no adjustments this year, see if i get the bad eff again.
========================
10/29/2020
calling it and kegging today. 10days. FG 1024
========================
10/26/2020
brewed this on 10/20/2020. need to update recipe from notebook but i believe it only came out at 1065. i think the flaked oats, wheat, and pumpkin dont contribute as many points as this calculator says it does....we will see.
========================
10/03/2020
reviewing notes and recipe from last year, going to combine kind of what i was trying to do and what i actually did. removing 1lb 2row and adding that to the maris otter. going to keep the 1lb honey malt, 1 lb lactose, 1lb wheat malt, 1 lb flaked oats, 1lb flaked wheat, 1lb 40L

========================
9/30/2019 brew day
there was snafu with ingredients. i had the homebrew shop pick my order last week. one bag was supposed to have 2lb oat malt and 2lb wheat malt. as far as i can tell it was just 4lb of flaked oats. so i just used 2lb of that flaked oat, then i had a bag of 1lb wheat malt and 40L (wouldve preferred not to use the 40L but it was mixed) so i added that and another lb of 2row.

Also for simplicity i scratched the existing spice bill and just did 2.5 tsp pumpkin pie spice. (using charlie papazian pumpkin recipe as reference for the approximate spice amount)
https://www.homebrewersassociation.org/homebrew-recipe/beer-recipe-of-the-week-cucurbito-pepo-pumpkin-ale-2/
========================
9/25/2019
changing from pilsner to maris otter
========================
9/16/2019
Based on the award winning mango maya recipe. Considering coconut!? Bumped it down from 8 to 4oz. taking the hop schedule and pumpkin and spice amounts from 2017's pumpkin single 2. (pumpkin single 1 used brown sugar which is counterproductive in this milkshake beer) changed 2row back to pilsner. color estimator looks pretty orange but considering adding some crystal malt? biscuit malt has highest lovibond from original recipe....

Last Updated and Sharing
 
309
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2022-09-22 16:21 UTC
  • Snapshot Created: 2022-09-22 16:12 UTC