MARZENBIER - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

MARZENBIER

165 calories 17.5 g 12 oz
brewer logo
Beer Stats
Method: BIAB
Style: Märzen
Boil Time: 60 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 6 gallons
Post Boil Size: 5.5 gallons
Pre Boil Gravity: 1.046 (recipe based estimate)
Post Boil Gravity: 1.050 (recipe based estimate)
Efficiency: 65% (brew house)
Calories: 165 calories (Per 12oz)
Carbs: 17.5 g (Per 12oz)
Created: Friday August 14th 2020
1.050
1.013
4.9%
21.4
16.3
5.5
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
5 lb Munich Dark 20L5 lb Munich Dark 20L 34 20 41.7%
5 lb German - Vienna5 lb Vienna 37 4 41.7%
1 lb Weyermann - Caramunich Type 11 lb Caramunich Type 1 33.5 35 8.3%
1 lb German - Melanoidin1 lb Melanoidin 37 25 8.3%
12 lbs / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1 oz Hallertau Mittelfruh1 oz Hallertau Mittelfruh Hops Pellet 4 Boil 60 min 14.31 40%
1 oz Hallertau Mittelfruh1 oz Hallertau Mittelfruh Hops Pellet 4 Boil 15 min 7.1 40%
0.50 oz Saaz0.5 oz Saaz Hops Pellet 3.2 Boil 0 min 20%
2.50 oz / $ 0.00
 
Yeast
Wyeast - Bavarian Lager 2206
Amount:
1 Each
Cost:
Attenuation (avg):
75%
Flocculation:
Med-High
Optimum Temp:
46 - 58 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 90 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: co2       CO2 Level: 2.25 Volumes
 
Target Water Profile
Stump Springs North Ogden, Utah, USA
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
7 gal Infusion 154 °F 154 °F 60 min
Quick Water Requirements
Water Gallons  Quarts
Strike water volume (equipment estimates 8.84 g | 35.4 qt) 7.75 31  
Mash volume with grains (equipment estimates 9.8 g | 39.2 qt) 8.71 34.8  
Grain absorption losses -1.5 -6  
Mash Lauter Tun losses -0.25 -1  
Pre boil volume (equipment estimates 7.09 g | 28.4 qt) 6 24  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.09 -0.4  
Post boil Volume 5.5 22  
Volume into fermentor 5.5 22  
Total: 7.75 31
Equipment Profile Used: System Default
 
Notes

Chill wort to pitching temp of 48°-53°F, set regulator to initial fermentation temp between 50°-55°F (10°-13°C), and leave the beer to ferment until it is at least 50% attenuated (4-8 days).

Once 50% attenuation is reached, start bumping the regulator up 5°F every 12 hours until it reaches 65°-68°F (18°-20°C). Allow the beer to remain at this temp until fermentation is complete and the yeast have cleaned-up after themselves, which can take anywhere from 4 to 10 days.

When FG is stable and no diacetyl or acetaldehyde is detected in the beer, begin ramping the temp down in 5°-8°F increments every 12 hours or so until it reaches 30°-32°F (-1°-0°C). Allow the beer to remain at this temp for 3-5 days, during which it will begin to drop clear.

Last Updated and Sharing
 
236
Views
2
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2021-07-05 23:41 UTC