Keg Washer

jschein

jschein

Well-Known Member
Lifetime Member
Established Member
Joined
Jan 5, 2013
Messages
139
Reaction score
299
Points
63
Anyone have a Mark II or bucket blaster or diy auto keg cleaner.
Do they work well?
 
I think this one you mentioned. I have this one. Got cheaper than that price though
 
I made mine with a submersible pump and a CIP ball. pretty simple but works really well. it cleans fermentors too.

It sits in a bin for water and a shelf for the keg to sit on.

edit: oh ya, I use a 1000W submersible heater to heat the water too

20241102_162432.jpg
20241102_162602.jpg
 
Last edited:
I updated it with pictures :D
 
I built this today. I used the website that @jschein referenced and modified it into a 4-legged model and used threaded connections for the legs. I made it four legs so the kegs and fermenters would have a stable platform to sit on. Plus the weight wouldn't be sitting right on the pump. I used threaded connections for the legs so I could dissemble and air dry afterwards. I figured constant moisture wouldn't be good for something intended to clean and sanitize. The pump is a 600 GPH pond pump that I already had. The CIP spray ball does a good job of spreading the water around but doesn't turn it into a scouring machine. (I had wondered that before I bought it.)

Keg Washer 2.0.jpg
 
BarbarianBrewer said:
I built this today. I used the website that @jschein referenced and modified it into a 4-legged model and used threaded connections for the legs. I made it four legs so the kegs and fermenters would have a stable platform to sit on. Plus the weight wouldn't be sitting right on the pump. I used threaded connections for the legs so I could dissemble and air dry afterwards. I figured constant moisture wouldn't be good for something intended to clean and sanitize.

View attachment 30654
Click to expand...
nice! I like the addition of the ball lock connectors to clean those too. I ussualy have to clean those in a seperate step. may have to steal that :p
 
BarbarianBrewer said:
I built this today. I used the website that @jschein referenced and modified it into a 4-legged model and used threaded connections for the legs. I made it four legs so the kegs and fermenters would have a stable platform to sit on. Plus the weight wouldn't be sitting right on the pump. I used threaded connections for the legs so I could dissemble and air dry afterwards. I figured constant moisture wouldn't be good for something intended to clean and sanitize. The pump is a 600 GPH pond pump that I already had. The CIP spray ball does a good job of spreading the water around but doesn't turn it into a scouring machine. (I had wondered that before I bought it.)

View attachment 30654
Click to expand...
I have a very strong pump, I think Ill build one like yours
 
I got one of those keg washers from SS Brewtech. It was pricy but it works really nice. Basically set it and forget it.
 
You must log in or register to reply here.
Copyright © 2007-2024 Brewer's Friend, Inc. - Send Feedback - Terms - RSS Feed - Do Not Sell or Share My Personal Information

Back
Top