Kiwanda Cream Ale Clone - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Kiwanda Cream Ale Clone

157 calories 14.1 g 12 oz
brewer logo
Beer Stats
Method: All Grain
Style: Cream Ale
Boil Time: 60 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 6.5 gallons
Post Boil Size: 5.5 gallons
Pre Boil Gravity: 1.040 (recipe based estimate)
Post Boil Gravity: 1.048 (recipe based estimate)
Efficiency: 70% (brew house)
Hop Utilization: 99%
Calories: 157 calories (Per 12oz)
Carbs: 14.1 g (Per 12oz)
Created: Saturday May 2nd 2020
Similar Recipes

Welcome Baby Franklin

by Lil' Wheaty's

OG: 1.048 FG: 1.010 ABV: 5.0% IBU: 16

County Seat Cream Ale

by MrBIP

OG: 1.046 FG: 1.010 ABV: 4.8% IBU: 16

1.048
1.009
5.2%
13.6
3.5
5.6
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
9 lb American - Pale 2-Row9 lb Pale 2-Row 37 1.8 87.3%
13 oz American - Carapils (Dextrine Malt)13 oz Carapils (Dextrine Malt) 33 1.8 7.9%
8 oz Flaked Barley8 oz Flaked Barley 32 2.2 4.8%
165 oz / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
2 oz Mount Hood2 oz Mount Hood Hops Pellet 10 Whirlpool 0 min 13.62 100%
2 oz / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
1 g Calcium Chloride (dihydrate) Water Agt Mash 1 hr.
2 g Epsom Salt Water Agt Mash 1 hr.
2 g Gypsum Water Agt Mash 1 hr.
3 g Citric acid Water Agt Mash 1 hr.
 
Yeast
- Omega West Coast Ale
Amount:
1 Each
Cost:
Attenuation (custom):
80%
Flocculation:
Medium
Optimum Temp:
60 - 73 °F
Starter:
No
Fermentation Temp:
65 °F
Pitch Rate:
0.35 (M cells / ml / ° P) 87 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: co2       CO2 Level: 2.65 Volumes
 
Target Water Profile
VANCOUVER, WA
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
3.7 gal Strike 165 °F 150 °F 90 min
3.93 gal Fly Sparge 163 °F 150 °F 60 min
Starting Mash Thickness: 1.5 qt/lb
Starting Grain Temp: 55 °F
Quick Water Requirements
Water Gallons  Quarts
Strike water volume at mash thickness of 1.5 qt/lb 3.87 15.5  
Mash volume with grains (equipment estimates 4.62 g | 18.5 qt) 4.69 18.8  
Grain absorption losses -1.29 -5.2  
Remaining sparge water volume (equipment estimates 4.67 g | 18.7 qt) 4.17 16.7  
Mash Lauter Tun losses -0.25 -1  
Pre boil volume (equipment estimates 7 g | 28 qt) 6.5 26  
Boil off losses -1.5 -6  
Post boil Volume 5.5 22  
Hops absorption losses (whirlpool, hop stand) -0.08 -0.3  
Top off amount 0.08 0.3  
Going into fermentor 5.5 22  
Total: 8.04 32.2
Equipment Profile Used: System Default
 
Notes

Mill the grains and mix with 15.5 qts. (14.6 L) of 162 °F (72 °C) strike water to reach a mash temperature of 150 °F (66 °C). Hold this temperature for 90 minutes. Vorlauf until your runnings are clear. Sparge with enough water to obtain 6.5 gallons (24.6 L) of wort. Boil for 60 minutes. After the boil, turn off heat and begin a whirlpool of the hot wort. Add the hops while whirlpooling. Let stand for 20 minutes, then chill the wort to 65 °F (18 °C). Aerate with pure oxygen or filtered air and pitch yeast.

Ferment at 65 °F (18 °C) for 7 days. Raise to 70 °F (21 °C) for three more days. Once the beer reaches terminal gravity, bottle or keg and carbonate to approximately 2.5 volumes. You can cold-crash the beer prior to packaging to 35 °F (2 °C) for 48 hours to improve clarity.

Last Updated and Sharing
 
536
Views
1
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2020-05-02 16:25 UTC