NEIPA - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

NEIPA

214 calories 19.8 g 12 oz
brewer logo
Beer Stats
Method: All Grain
Style: American IPA
Boil Time: 60 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 6.5 gallons
Post Boil Size: 5 gallons
Pre Boil Gravity: 1.050 (recipe based estimate)
Post Boil Gravity: 1.065 (recipe based estimate)
Efficiency: 70% (brew house)
Calories: 214 calories (Per 12oz)
Carbs: 19.8 g (Per 12oz)
Created: Sunday April 12th 2020
1.065
1.013
6.9%
72.8
4.6
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
9 lb US - Pale 2-Row9 lb Pale 2-Row 37 1.8 70.6%
2 lb United Kingdom - Golden Promise2 lb Golden Promise 37 3 15.7%
1 lb Flaked Wheat1 lb Flaked Wheat 34 2 7.8%
12 oz Flaked Oats12 oz Flaked Oats 33 2.2 5.9%
12.75 lbs / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1.50 oz Amarillo1.5 oz Amarillo Hops Leaf/Whole 8.6 Boil 60 min 44.51 12.5%
1.50 oz Amarillo1.5 oz Amarillo Hops Leaf/Whole 8.6 Boil 0 min 12.5%
1 oz Citra1 oz Citra Hops Leaf/Whole 11 Hop Stand 0 min 8.24 8.3%
1 oz Galaxy1 oz Galaxy Hops Leaf/Whole 14.25 Hop Stand 0 min 10.67 8.3%
1 oz Mosaic1 oz Mosaic Hops Leaf/Whole 12.5 Hop Stand 0 min 9.36 8.3%
3 oz Citra3 oz Citra Hops Leaf/Whole 11 Dry Hop 0 days 25%
1.50 oz Galaxy1.5 oz Galaxy Hops Leaf/Whole 14.25 Dry Hop 0 days 12.5%
1.50 oz Mosaic1.5 oz Mosaic Hops Leaf/Whole 12.5 Dry Hop 0 days 12.5%
12 oz / $ 0.00
 
Yeast
GigaYeast - Vermont IPA Yeast
Amount:
1 Each
Cost:
Attenuation (avg):
80%
Flocculation:
Med-Low
Optimum Temp:
62 - 75 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 105 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 2.25 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Mash Chemistry and Brewing Water Calculator
Quick Water Requirements
Water Gallons  Quarts
Strike water volume at mash thickness of 1.5 qt/lb 4.78 19.1  
Mash volume with grains (equipment estimates 5.69 g | 22.8 qt) 5.8 23.2  
Grain absorption losses -1.59 -6.4  
Remaining sparge water volume (equipment estimates 3.68 g | 14.7 qt) 3.56 14.3  
Mash Lauter Tun losses -0.25 -1  
Pre boil volume (equipment estimates 6.61 g | 26.5 qt) 6.5 26  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.11 -0.5  
Post boil Volume 5 20  
Hops absorption losses (whirlpool, hop stand) -0.11 -0.5  
Top off amount 0.11 0.5  
Going into fermentor 5 20  
Total: 8.34 33.4
Equipment Profile Used: System Default
 
Notes

On brew day, mash in all the grains at 152 °F (67 °C) in 19.1 Quarts of water, and hold this temperature for 60 minutes. Sparge with 15.2 Quarts of 168 °F (76 °C) water until 6.5 gallons (25 L) of wort is collected.

Boil the wort for 60 minutes, adding the hops at times indicated in the recipe. The first wort hops are added to the kettle just before lautering begins. The 0 minute hops get added right after the heat is turned off. Stir the wort gently and allow to cool to 180 °F (82 °C) then add the hop stand hops. Allow to stand for 20 minutes then chill to 64 °F (18 °C) and rack to the fermenter.

Oxygenate, then pitch the yeast. Start fermentation at 64 °F (18 °C), allowing temperature to rise naturally as fermentation progresses. Mix the dry hops and divide into three equal portions. The first portion gets added after two days of active fermentation. The second portion gets added at the end of fermentation.

The third portion gets added three days after fermentation ends. Allow each dry hop addition to be in contact with the beer for two to three days, then remove.

Last Updated and Sharing
 
283
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2021-06-17 19:00 UTC