Amount | Fermentable | Cost | PPG | °L | Bill % |
---|---|---|---|---|---|
6 lb | Briess - DME Golden Light | 44.6 | 4 | 73.3% | |
1.75 lb | Flaked Oats | 33 | 2.2 | 21.4% | |
7 oz | Briess - Carapils Malt | 34.5 | 1.5 | 5.3% | |
8.19 lbs / $ 0.00 |
Amount | Variety | Cost | Type | AA | Use | Time | IBU | Bill % |
---|---|---|---|---|---|---|---|---|
0.30 oz | Columbus | Pellet | 15 | Boil | 60 min | 8.53 | 3.1% | |
0.30 oz | Mosaic | Pellet | 12.5 | Whirlpool | 0 min | 2.81 | 3.1% | |
0.20 oz | Cascade | Pellet | 7 | Whirlpool | 0 min | 1.05 | 2.1% | |
0.60 oz | Mosaic | Pellet | 12.5 | Dry Hop | 5 days | 6.2% | ||
0.30 oz | Citra | Pellet | 11 | Dry Hop | 5 days | 3.1% | ||
0.30 oz | Simcoe | Pellet | 12.7 | Dry Hop | 5 days | 3.1% | ||
0.30 oz | Cascade | Pellet | 7 | Dry Hop | 5 days | 3.1% | ||
2.90 oz | Mosaic | Pellet | 12.5 | Dry Hop | 5 days | 29.9% | ||
1.50 oz | Citra | Pellet | 11 | Dry Hop | 5 days | 15.5% | ||
1.50 oz | Cascade | Pellet | 7 | Dry Hop | 5 days | 15.5% | ||
1.50 oz | Simcoe | Pellet | 12.7 | Dry Hop | 5 days | 15.5% | ||
9.70 oz / $ 0.00 |
Wyeast - London Ale III 1318 | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||
$ 0.00 |
Method: dextrose Amount: 3.8 oz Temp: 66 °F CO2 Level: 2.2 Volumes |
Water | Gallons | Quarts |
---|---|---|
Heat water added to kettle (equipment estimates 2.83 g | 11.3 qt) | 2.32 | 9.3 |
Mash volume with grains (equipment estimates 2.83 g | 11.3 qt) | 2.5 | 10 |
Grain absorption losses (steeping) | -0.27 | -1.1 |
Volume increase from sugar/extract (early additions) | 0.45 | 1.8 |
Pre boil volume (equipment estimates 3.01 g | 12 qt) | 2.5 | 10 |
Boil off losses | -1.5 | -6 |
Hops absorption losses (first wort, boil, aroma) | -0.01 | -0 |
Post boil volume | 1.5 | 6 |
Hops absorption losses (whirlpool, hop stand) | -0.02 | -0.1 |
Top off amount | 3.52 | 14.1 |
Going into fermentor | 5 | 20 |
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ. | ||
Total: | 5.84 | 23.4 |
Equipment Profile Used: | System Default |