Dante's concoction (2x) - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Dante's concoction (2x)

168 calories 16.9 g 12 oz
brewer logo
Beer Stats
Method: All Grain
Style: American Wheat Beer
Boil Time: 45 min
Batch Size: 12.4 gallons (ending kettle volume)
Pre Boil Size: 13.7 gallons
Pre Boil Gravity: 1.046 (recipe based estimate)
Efficiency: 78% (ending kettle)
Source: Magical & Lurch
Calories: 168 calories (Per 12oz)
Carbs: 16.9 g (Per 12oz)
Created: Wednesday December 4th 2019
Similar Recipes

Raspberry Wheat Beer

by Leetxen

OG: 1.053 FG: 1.009 ABV: 5.8% IBU: 19

LoonyPrepper77

by jwir3

OG: 1.045 FG: 1.011 ABV: 4.5% IBU: 24

1.051
1.012
5.0%
20.7
4.4
5.3
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
10 lb Canadian - Pale 2-Row10 lb Pale 2-Row 36 1.75 42%
13 oz German - Acidulated Malt13 oz Acidulated Malt 27 3.4 3.4%
2 lb United Kingdom - Golden Naked Oats2 lb Golden Naked Oats 33 10 8.4%
10 lb Canadian - Pale Wheat10 lb Pale Wheat 36 2 42%
1 lb Rice Hulls1 lb Rice Hulls 0 0 4.2%
23.81 lbs / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1 oz Magnum1 oz Magnum Hops Leaf/Whole 15.1 Boil 30 min 16.76 25%
2 oz Hallertau Mittelfruh2 oz Hallertau Mittelfruh Hops Leaf/Whole 3.75 Boil at 212 °F 10 min 3.93 50%
1 oz Idaho 71 oz Idaho 7 Hops Pellet 15 Aroma 0 min 25%
4 oz / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
4 g Chalk Water Agt Mash 1 hr.
18.40 g Calcium Chloride (dihydrate) Water Agt Mash 1 hr.
6 g Epsom Salt Water Agt Mash 1 hr.
3 g Gypsum Water Agt Mash 1 hr.
2 tsp Wyeast - Beer Nutrient Water Agt Boil 10 min.
6 g Baking Soda Water Agt Sparge 1 hr.
 
Yeast
Escarpment Labs - Hornindal Kveik Blend
Amount:
2 Each
Cost:
Attenuation (avg):
75%
Flocculation:
Med-High
Optimum Temp:
77 - 95 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.75 (M cells / ml / ° P) 444 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 2.52 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
100 10 20 140 70 40
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
8 gal Mash-in to 153F using 167F Infusion 169 °F 153 °F 60 min
5 gal Mash-out to 168F using boiling Infusion 212 °F 170 °F 60 min
5 gal Sparge usiing 170F Sparge 170 °F 170 °F 60 min
Starting Mash Thickness: 1.75 qt/lb
Quick Water Requirements
Water Gallons  Quarts
WARNING: Boil kettle capacity (12 gal | 48 qt) exceeded. Volume required: 13.68 gal (54.7 qt). Suggest reducing initial water volume to 12 gal (48 qt) and adding 1.68 gal (6.7 qt) sparge/top-off.    
WARNING: Mash tun capacity exceeded. Volume required: 12.32 gal (49.29 qt). Suggest reducing initial water volume to 10.1 gal (40.38 qt) and adding 0.32 gal (1.29 qt) sparge/top-off. 10.42 41.7  
Strike water volume at mash thickness of 1.75 qt/lb 10.42 41.7  
Mash volume with grains 12.32 49.3  
Grain absorption losses -2.98 -11.9  
Remaining sparge water volume 6.51 26  
Mash Lauter Tun losses -0.25 -1  
Pre boil volume (equipment estimates 13.68 g | 54.7 qt) 13.7 54.8  
Boil off losses -1.13 -4.5  
Hops absorption losses (first wort, boil, aroma) -0.15 -0.6  
Post boil volume (equipment estimates 12.43 g | 49.7 qt) 12.4 49.6  
Estimated amount in fermentor 12.4 49.6  
Total: 16.93 67.7
Equipment Profile Used: System Default
 
Notes

When I make a double batch (a.k.a. 2x a beer) as opposed to a single, the same amount of heat is absorbed by the mash tun. This causes the temperature of the mash to be higher for the same temperature of mash-in water. I lower the mash-in temp water by a 2-5 degrees to obtain desired results. I probably should be pre-heating the tun, but I don't brew often enough to practice this part of the procedure and it works for me.

Batch #1 - Ebbegarden Kviek yeast - Pitch Temp 28 C
2 oz Summit

Batch #2 - Skare Kviek yeast - Pitch Temp 32 C
2 oz Mt. Hood

Good and useful info on Kviek yeasts:

Last Updated and Sharing
 
396
Views
2
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2019-12-08 01:37 UTC