Whitbread 1917 Session IPA Riff - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Whitbread 1917 Session IPA Riff

148 calories 15.2 g 12 oz
brewer logo
Beer Stats
Method: Partial Mash
Style: American IPA
Boil Time: 90 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 3.5 gallons
Post Boil Size: 2.5 gallons
Pre Boil Gravity: 1.051 (recipe based estimate)
Post Boil Gravity: 1.072 (recipe based estimate)
Efficiency: 70% (brew house)
Calories: 148 calories (Per 12oz)
Carbs: 15.2 g (Per 12oz)
Created: Saturday October 26th 2019
1.045
1.011
4.5%
74.6
5.2
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
2 lb American - Pale 6-Row2 lb Pale 6-Row 35 1.8 32.8%
3.10 lb Dry Malt Extract - Light3.1 lb Dry Malt Extract - Light 42 4 50.8%
1 lb Brown Sugar1 lb Brown Sugar - (late boil kettle addition) 45 15 16.4%
6.10 lbs / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1.25 oz Kent Goldings1.25 oz Kent Goldings Hops Pellet 5 Boil 20 min 14.23 29.4%
3 oz Kent Goldings3 oz Kent Goldings Hops Pellet 5 Boil 90 min 60.33 70.6%
4.25 oz / $ 0.00
 
Yeast
Wyeast - Whitbread Ale 1099
Amount:
1 Each
Cost:
Attenuation (avg):
70%
Flocculation:
High
Optimum Temp:
64 - 75 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 74 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 0 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Mash Chemistry and Brewing Water Calculator
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 4.84 g | 19.4 qt) 3.51 14  
Mash volume with grains (equipment estimates 4.84 g | 19.4 qt) 3.67 14.7  
Grain absorption losses (steeping) -0.25 -1  
Mash Lauter Tun losses -0.25 -1  
Volume increase from sugar/extract (early additions) 0.24 1  
Pre boil volume (equipment estimates 4.83 g | 19.3 qt) 3.5 14  
Volume increase from sugar/extract (late additions) 0.07 0.3  
Boil off losses -2.25 -9  
Hops absorption losses (first wort, boil, aroma) -0.16 -0.6  
Post boil volume 2.5 10  
Top off amount 2.5 10  
Going into fermentor 5 20  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 6.01 24
Equipment Profile Used: System Default
 
Notes

https://blog.eckraus.com/ipa-session-beer-recipe-all-grain-extract

All-Grain Directions:
Mash the crushed grains in about 1.5 gallons of clean, chlorine-free water for two hours. Lauter and sparge, collecting about 6.5 gallons of wort in the brew kettle. Bring to a boil and boil for 90 minutes, adding hops according to schedule. Mix in the brown sugar at the end of the boil. Chill wort to fermentation temperature and ferment at 70˚F until complete. Bottle or keg and enjoy!

Partial-Mash Directions:
Replace the English pale malt with 3.1 lbs. light dry malt extract. Mash the crushed six-row malt in 2 qts. of water, then sparge. Add enough water to make a 3-gallon boil and mix in the malt extract. Bring to a boil. Increase the 90-minute hop addition to 3.5 oz. and the 20-minute hop addition to 1.5 oz. Continue with the recipe above.

Incidentally, Whitbread yeast is derived from that brewery. Safale S-04 is the dry yeast version.

Last Updated and Sharing
 
445
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2019-10-26 23:43 UTC