extract lush clone - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

extract lush clone

195 calories 19.6 g 12 oz
brewer logo
Beer Stats
Method: Extract
Style: No Profile Selected
Boil Time: 60 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 3 gallons
Post Boil Size: 1.5 gallons
Pre Boil Gravity: 1.108 (recipe based estimate)
Post Boil Gravity: 1.215 (recipe based estimate)
Efficiency: 35% (steeping grains only)
Source: Genus Brewing
Hop Utilization: 94%
Calories: 195 calories (Per 12oz)
Carbs: 19.6 g (Per 12oz)
Created: Sunday September 29th 2019
1.059
1.014
5.9%
43.7
3.5
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
6 lb Dry Malt Extract - Pilsen6 lb Dry Malt Extract - Pilsen 42 2 63.2%
1 lb Corn Sugar - Dextrose1 lb Corn Sugar - Dextrose 42 0.5 10.5%
0.50 lb Bestmalz - Chit Malt0.5 lb Chit Malt 42 2 5.3%
7.50 lbs / $ 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
1.50 lb Briess - Brewers Oat Flakes1.5 lb Brewers Oat Flakes 32.2 2.5 15.8%
0.50 lb German - Acidulated Malt0.5 lb Acidulated Malt 27 3.4 5.3%
$ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1 oz Bravo1 oz Bravo Hops Pellet 15.5 Boil 60 min 29.98 16.7%
2 oz Centennial2 oz Centennial Hops Pellet 10 Boil 5 min 7.71 33.3%
2 oz Yakima Chief Hops - Mosaic LupuLN2 (Cryo)2 oz Mosaic LupuLN2 (Cryo) Hops Lupulin Pellet 22 Whirlpool at 170 °F 10 min 5.99 33.3%
1 oz Yakima Chief Hops - Mosaic LupuLN2 (Cryo)1 oz Mosaic LupuLN2 (Cryo) Hops Lupulin Pellet 22 Dry Hop 5 days 16.7%
6 oz / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
4 g Calcium Chloride (anhydrous) Water Agt Mash 0 min.
2 g Gypsum Water Agt Mash 0 min.
 
Yeast
Imperial Yeast - A07 Flagship
Amount:
1 Each
Cost:
Attenuation (avg):
73%
Flocculation:
Medium-low
Optimum Temp:
60 - 72 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 106 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 0 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Use 1 gallon of native of tap water and 1 gallon distilled water when steeping grains. Use distilled water when "topping off".
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 2.88 g | 11.5 qt) 2.77 11.1  
Mash volume with grains (equipment estimates 2.88 g | 11.5 qt) 2.97 11.9  
Grain absorption losses (steeping) -0.31 -1.3  
Volume increase from sugar/extract (early additions) 0.54 2.2  
Pre boil volume (equipment estimates 3.11 g | 12.5 qt) 3 12  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.11 -0.5  
Post boil volume 1.5 6  
Hops absorption losses (whirlpool, hop stand) -0.08 -0.3  
Top off amount 4.08 16.3  
Going into fermentor 5.5 22  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 6.84 27.4
Equipment Profile Used: System Default
"extract lush clone" No Profile Selected beer recipe by Genus Brewing. Extract, ABV 5.9%, IBU 43.69, SRM 3.49, Fermentables: (Dry Malt Extract - Pilsen, Corn Sugar - Dextrose, Chit Malt) Steeping Grains: (Brewers Oat Flakes, Acidulated Malt) Hops: (Bravo, Centennial, Mosaic LupuLN2 (Cryo)) Other: (Calcium Chloride (anhydrous), Gypsum)
Last Updated and Sharing
 
387
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2019-11-17 01:46 UTC