Bell's Two Hearted Ale Clone (AHA) - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Bell's Two Hearted Ale Clone (AHA)

211 calories 20.4 g 12 oz
brewer logo
Beer Stats
Method: All Grain
Style: American Pale Ale
Boil Time: 60 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 6.6 gallons
Post Boil Size: 5 gallons
Pre Boil Gravity: 1.048 (recipe based estimate)
Post Boil Gravity: 1.064 (recipe based estimate)
Efficiency: 65% (brew house)
Source: https://www.homebrewersassociation.org/homebrew-recipe/bells-two-hearted-ale-clone/
Hop Utilization: 87%
Calories: 211 calories (Per 12oz)
Carbs: 20.4 g (Per 12oz)
Created: Thursday September 26th 2019
1.064
1.014
6.6%
64.5
7.0
5.7
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
10 lb Briess - Brewers Malt 2-Row10 lb Brewers Malt 2-Row 37 1.8 75%
2.83 lb Briess - Pale Ale Malt 2-Row2.83 lb Pale Ale Malt 2-Row 36.8 3.5 21.2%
8 oz Briess - Caramel Malt - 40L8 oz Caramel Malt - 40L 35.4 40 3.8%
13.33 lbs / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1.20 oz Centennial1.2 oz Centennial Hops Leaf/Whole 10 Boil 45 min 33.58 20.3%
1.20 oz Centennial1.2 oz Centennial Hops Pellet 10 Boil 30 min 30.93 20.3%
3.50 oz Centennial3.5 oz Centennial Hops Pellet 10 Dry Hop 7 days 59.3%
5.90 oz / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
4 g Gypsum Water Agt Mash 0 min.
 
Yeast
White Labs - California Ale Yeast WLP001
Amount:
1 Each
Cost:
Attenuation (avg):
76.5%
Flocculation:
Medium
Optimum Temp:
68 - 73 °F
Starter:
Yes
Fermentation Temp:
70 °F
Pitch Rate:
0.35 (M cells / ml / ° P) 104 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 4.04 Volumes
 
Target Water Profile
fernley, nv
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
4.5 gal Step Mash: 45 min @150' Infusion -- 150 °F 45 min
Ramp to 170' over 15 min Temperature -- 170 °F 15 min
Rest 10 min @ 170' Temperature -- 170 °F 10 min
Vorlauf until clear Vorlauf -- 170 °F --
2.1 gal Collect 6.6 gallons (25L), sparging with 175' water. Sparge -- 175 °F --
Starting Mash Thickness: 1.7 qt/lb
Quick Water Requirements
Water Gallons  Quarts
Strike water volume at mash thickness of 1.7 qt/lb 5.67 22.7  
Mash volume with grains 6.73 26.9  
Grain absorption losses -1.67 -6.7  
Remaining sparge water volume (equipment estimates 2.84 g | 11.4 qt) 2.85 11.4  
Mash Lauter Tun losses -0.25 -1  
Pre boil volume 6.6 26.4  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.09 -0.4  
Post boil Volume 5 20  
Going into fermentor 5 20  
Total: 8.52 34.1
Equipment Profile Used: System Default
 
Notes

https://www.homebrewersassociation.org/homebrew-recipe/bells-two-hearted-ale-clone/

Bell’s Two Hearted Ale Clone

Bells Two Hearted Ale
Bell’s Brewery of Kalamazoo, Mich. brews a little beer called Two Hearted Ale. Maybe you’ve heard of it? This India pale ale is bursting with hop aromas ranging from pine to grapefruit thanks to the use of 100 percent Centennial hops. This recipe was created by David Curtis and Ryan Kramer of Bell’s General Store.

This homebrew recipe is featured in Top 50 Commercial Clone Beer Recipes 2018 and has been included in Zymurgy‘s Best Beers in America.

INGREDIENTS
For 5 gallons (19 L)

10 lb (4.5 kg) | Briess Two-row Brewers Malt (1.8°L)
2.83 lb (1.3 kg) | Briess Pale Malt (3.5°L)
8.0 oz (227 g) | Briess Caramel (40°L)

1.2 oz (34 g) | Centennial pellets, 9.1% a.a. (45 min)
1.2 oz (34 g) | Centennial pellets, 9.1% a.a. (30 min)
3.5 oz (99 g) | Centennial pellets, 9.1% a.a. (dry hop)

White Labs WLP001 California Ale Yeast or WLP California Ale V Yeast

SPECIFICATIONS
Original Gravity: 1.063
Final Gravity: 1.012
ABV: 6.7%
IBU: 55
SRM: 10
Boil Time: 75 minutes
Efficiency: 65%
Pre-boil Volume: 6.6 gallons

DIRECTIONS:
Use 4.5 gallons (17 L) carbon filtered water, adjust with 4 grams gypsum.

Step mash: 45 minutes at 150°F (66°C), ramp to 170°F (77°C) over 15 minutes (or ramp by infusing 2.5 gallons boiling water), rest 10 minutes at 170°F (77°C).

Vorlauf until clear.

Collect 6.6 gallons (25 L), sparging with 175°F (79°C) water. Boil vigorously for approximately 75 minutes, hopping as in ingredients section.

Whirlpool and allow to settle for 15 minutes. Chill wort to 64°F (18°C). Aerate wort and pitch yeast.

Ferment warm (ale temperature). Dry hop one week into fermentation.

Allow two hearted clone to stay warm with hops for a week.

Rack beer, crash cool, and cold age for a week.

Rack beer, prime with sugar and bottle.

Extract Version
Use 6.6 lb (3 kg) Briess Golden Light Liquid malt extract and 2.5 lb (1.1 kg) Golden Light Dry malt extract instead of the two-row and pale ale malts.

Steep the 8 oz caramel malt in 1 gallon (3.8 L) of 150°F (66°C) water for 20 minutes. Strain and sparge through the grains, topping up to 6.6 gallons (or up to 3.5 gallons for a partial boil) and bring to a boil.

Add the malt extracts. Add 2 grams of gypsum to the boil.

Continue as per all-grain recipe (unless using partial boil process where water needs to be added to bring post boil volume up to 5.25 gallons (20 L)).

Last Updated and Sharing
 
626
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2019-10-11 23:27 UTC