Garth Guice - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Garth Guice

215 calories 20.5 g 330 ml
brewer logo
Beer Stats
Method: BIAB
Style: Specialty IPA: New England IPA
Boil Time: 60 min
Batch Size: 23 liters (fermentor volume)
Pre Boil Size: 26.5 liters
Post Boil Size: 25 liters
Pre Boil Gravity: 1.061 (recipe based estimate)
Post Boil Gravity: 1.064 (recipe based estimate)
Efficiency: 70% (brew house)
Source: Based on https://byo.com/article/neipa-style-profile/
Rating:
5.00 (1 Review)

Calories: 215 calories (Per 330ml)
Carbs: 20.5 g (Per 330ml)
Created: Monday September 9th 2019
Similar Recipes

NEIPA Hoppy ( juicy) - Braumeister 20L

by AnteK

OG: 1.069 FG: 1.019 ABV: 6.6% IBU: 49

1.070
1.015
7.3%
51.2
5.8
5.4
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
3 kg American - Pale 2-Row3 kg Pale 2-Row 37 1.8 40%
3 kg United Kingdom - Maris Otter Pale3 kg Maris Otter Pale 38 3.75 40%
1 kg Flaked Wheat1 kg Flaked Wheat 34 2 13.3%
0.50 kg Flaked Oats0.5 kg Flaked Oats 33 2.2 6.7%
7.50 kg / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
40 g Cascade40 g Cascade Hops Pellet 7 First Wort 60 min 30.86 9.8%
40 g Cascade40 g Cascade Hops Pellet 7 Boil 0 min 9.8%
40 g Citra40 g Citra Hops Pellet 11 Whirlpool at 80 °C 20 min 5.93 9.8%
40 g Galaxy40 g Galaxy Hops Pellet 14.25 Whirlpool at 80 °C 20 min 7.68 9.8%
40 g Mosaic40 g Mosaic Hops Pellet 12.5 Whirlpool at 80 °C 20 min 6.74 9.8%
90 g Citra90 g Citra Hops Pellet 11 Dry Hop 3 days 22%
60 g Vic Secret60 g Vic Secret Hops Pellet 15.5 Dry Hop 3 days 14.6%
60 g Mosaic60 g Mosaic Hops Pellet 12.5 Dry Hop 3 days 14.6%
410 g / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
14 g Calcium Chloride (dihydrate) Water Agt Mash 1 hr.
6 g Gypsum Water Agt Mash 1 hr.
1 tsp Wyeast - Beer Nutrient Water Agt Boil 15 min.
 
Yeast
Wyeast - London Ale III 1318
Amount:
1 Each
Cost:
Attenuation (custom):
80%
Flocculation:
High
Optimum Temp:
18 - 23 °C
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 137 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: co2       Amount: 1.11 bar       Temp: 3 °C       CO2 Level: 3 Volumes
 
Target Water Profile
Light colored and malty
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
60 5 10 200 100 0
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
26 L Strike -- 76 °C --
Infusion -- 68 °C 60 min
8 L Batch Sparge -- 77 °C 15 min
Quick Water Requirements
Water Liters
Strike water volume (equipment estimates 38.1 L) 34.9
Mash volume with grains (equipment estimates 43.1 L) 39.9
Grain absorption losses -7.5
Mash Lauter Tun losses -0.9
Pre boil volume (equipment estimates 29.7 L) 26.5
Boil off losses -5.7
Hops absorption losses (first wort, boil, aroma) -0.4
Post boil Volume (equipment estimates 23.6 L) 25
Hops absorption losses (whirlpool, hop stand) -0.6
WARNING: Exceeded batch size - reduce boil size  
Volume into fermentor (equipment estimates 24.4 L) 23
Total: 34.9  
Equipment Profile Used: System Default
 
Notes

Based on:

  • https://byo.com/article/neipa-style-profile/
  • http://www.theelectricbrewery.com/forum/viewtopic.php?t=30768


    Wet Hops:
    • add first wort hops to kettle after removing biab bag and wait until batch sparge is complete before firing up the kettle (this should give time for the hops to steep prior to boil)
    • add 0 minute hops at flameout (they stay in until end of whirlpool)
    • stir gently and allow to cool to ~80C
    • add other hops and hop-stand for 20 mins

      Dry Hops:
    • Mix dry hops and divide into 3 equal portions, add at:
  • 2 days after fermentation starts
  • end of fermentation
  • 3 days after end of fermentation
    • keep each DH addition in contact for 3 days only
    • throw dry hops in loose (no bag) and extract through scrote


      Fermentation:
    • Start at 18C and let naturally increase with ferment
Last Updated and Sharing
 
492
Views
1
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2019-09-17 20:51 UTC