Tanman's Amber Ale - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Tanman's Amber Ale

158 calories 16.4 g 12 oz
brewer logo
Beer Stats
Method: Extract
Style: American Amber Ale
Boil Time: 60 min
Batch Size: 6 gallons (fermentor volume)
Pre Boil Size: 2.5 gallons
Pre Boil Gravity: 1.114 (recipe based estimate)
Efficiency: 35% (steeping grains only)
Source: Russel Tanner
Calories: 158 calories (Per 12oz)
Carbs: 16.4 g (Per 12oz)
Created: Friday May 24th 2019
1.048
1.012
4.7%
29.0
11.5
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
8 lb Liquid Malt Extract - Amber8 lb Liquid Malt Extract - Amber 35 10 94.1%
8 lbs / $ 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
0.50 lb American - Caramel / Crystal 75L0.5 lb Caramel / Crystal 75L 33 75 5.9%
$ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
2 oz Northern Brewer2 oz Northern Brewer Hops Pellet 7.8 Boil 60 min 27.72 80%
0.50 oz Cascade0.5 oz Cascade Hops Pellet 7 Boil 5 min 1.24 20%
2.50 oz / $ 0.00
 
Yeast
Wyeast - American Ale 1056
Amount:
1 Each
Cost:
Attenuation (avg):
75%
Flocculation:
Med-Low
Optimum Temp:
60 - 72 °F
Starter:
Yes
Fermentation Temp:
66 °F
Pitch Rate:
0.35 (M cells / ml / ° P) 95 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 6.98 g | 27.9 qt) 1.88 7.5  
Mash volume with grains (equipment estimates 6.98 g | 27.9 qt) 1.92 7.7  
Grain absorption losses (steeping) -0.06 -0.3  
Volume increase from sugar/extract (early additions) 0.68 2.7  
Pre boil volume (equipment estimates 7.59 g | 30.4 qt) 2.5 10  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.09 -0.4  
Post boil volume 6 24  
Going into fermentor 6 24  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 1.88 7.5
Equipment Profile Used: System Default
 
Notes

Wyeast smack pack was already inflated when I received it from HopTech so I was worried. I simply cut the outside and inside and poured into the fermentor. It worked great and was fermenting in 12 hours.

Brewed on Jun 5 2019
I used a new burner and it took ~ 30 min to boil and I steeped
the crystal malt during this initial time up to boil.
initial gravity was 1.0525 at 60 degF.

Racked to a secondary on June 10 2019
Gravity at this point was 1.0125 at 60 degF. Tasted beer and it's
great with a tiny hop bite.

Last Updated and Sharing
 
343
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2019-06-10 17:58 UTC