New England IPA - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

New England IPA

225 calories 21.7 g 12 oz
brewer logo
Beer Stats
Method: All Grain
Style: Specialty IPA: New England IPA
Boil Time: 60 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 7.5 gallons
Pre Boil Gravity: 1.050 (recipe based estimate)
Efficiency: 65% (brew house)
Calories: 225 calories (Per 12oz)
Carbs: 21.7 g (Per 12oz)
Created: Sunday March 17th 2019
1.068
1.015
7.0%
96.0
4.9
5.7
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
12 lb American - Pale 2-Row12 lb Pale 2-Row 37 1.8 76.2%
12 oz Flaked Oats12 oz Flaked Oats 33 2.2 4.8%
1 lb Flaked Wheat1 lb Flaked Wheat 34 2 6.3%
2 lb United Kingdom - Golden Promise2 lb Golden Promise 37 3 12.7%
15.75 lbs / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1.50 oz Amarillo1.5 oz Amarillo Hops Leaf/Whole 8.6 First Wort 60 min 44.58 17.6%
1 oz Citra1 oz Citra Hops Leaf/Whole 11 Whirlpool 0 min 14.98 11.8%
1 oz Mosaic1 oz Mosaic Hops Leaf/Whole 12.5 Whirlpool 0 min 17.02 11.8%
1 oz Galaxy1 oz Galaxy Hops Leaf/Whole 14.25 Whirlpool 0 min 19.41 11.8%
3 oz Citra3 oz Citra Hops Leaf/Whole 11 Dry Hop 2 days 35.3%
1 oz Galaxy1 oz Galaxy Hops Leaf/Whole 14.25 Dry Hop 0 days 11.8%
8.50 oz / $ 0.00
 
Yeast
GigaYeast - Vermont IPA Yeast
Amount:
1 Each
Cost:
Attenuation (avg):
80%
Flocculation:
Med-Low
Optimum Temp:
62 - 75 °F
Starter:
No
Fermentation Temp:
70 °F
Pitch Rate:
0.35 (M cells / ml / ° P) 121 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
20 qt Infusion -- 155 °F 60 min
Starting Mash Thickness: 1.5 qt/lb
Quick Water Requirements
Water Gallons  Quarts
Strike water volume at mash thickness of 1.5 qt/lb 5.91 23.6  
Mash volume with grains 7.17 28.7  
Grain absorption losses -1.97 -7.9  
Remaining sparge water volume (equipment estimates 3.48 g | 13.9 qt) 3.81 15.3  
Mash Lauter Tun losses -0.25 -1  
Pre boil volume (equipment estimates 7.17 g | 28.7 qt) 7.5 30  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.06 -0.2  
Post boil Volume 5.61 22.5  
Hops absorption losses (whirlpool, hop stand) -0.11 -0.5  
Going into fermentor 5.5 22  
Total: 9.72 38.9
Equipment Profile Used: System Default
 
Notes

New England IPA

(5 gallons/19 L, all-grain)
OG = 1.061 FG = 1.012
IBU = 56 SRM = 5 ABV = 6.5%
Ingredients

9 lbs. (4.1 kg) US 2-row malt
2 lbs. (0.91 kg) UK Golden Promise malt
1 lb. (0.45 kg) flaked wheat
12 oz. (340 g) flaked oats
12.9 AAU Amarillo® hops (first wort hop) (1.5 oz./43 g at 8.6% alpha acids)
1.5 oz. (43 g) Amarillo® hops (0 min.)
1 oz. (28 g) Citra® hops (hop stand)
1 oz. (28 g) GalaxyTM hops (hop stand)
1 oz. (28 g) Mosaic® hops (hop stand)
3 oz. (85 g) Citra® hops (dry hop)
1.5 oz. (43 g) GalaxyTM hops (dry hop)
1.5 oz. (43 g) Mosaic® hops (dry hop)
GigaYeast GY054 (Vermont IPA) or White Labs WLP095 (Burlington Ale) yeast
3⁄4 cup corn sugar (if priming)
Step by Step

On brew day, prepare your ingredients; mill the grains, measure your hops, and prepare your water. This recipe uses reverse osmosis (RO) water. Add 1⁄4 tsp 10% phosphoric acid per 5 gallons (19 L) of brewing water, or until water measures pH 5.5 at room temperature. Add 3⁄4 tsp. calcium chloride (CaCl2) and 1⁄4 tsp. calcium sulfate (CaSO4) to the mash.

On brew day, mash in all the grains at 152 °F (67 °C) in 5 gallons (19 L) of water, and hold this temperature for 60 minutes. Raise the temperature by infusion or direct heating to 168 °F (76 °C) to mashout. Recirculate for 15 minutes. Fly sparge with 168 °F (76 °C) water until 6.5 gallons (25 L) of wort is collected.

Boil the wort for 75 minutes, adding the hops at times indicated in the recipe. The first wort hops are added to the kettle just before lautering begins. The 0 minute hops get added right after the heat is turned off. Stir the wort gently and allow to cool to 180 °F (82 °C) then add the hop stand hops. Allow to stand for 20 minutes then chill to 64 °F (18 °C) and rack to the fermenter.

Oxygenate, then pitch the yeast. Start fermentation at 64 °F (18 °C), allowing temperature to rise naturally as fermentation progresses. Mix the dry hops and divide into three equal portions. The first portion gets added after two days of active fermentation. The second portion gets added at the end of fermentation.

The third portion gets added three days after fermentation ends. Allow each dry hop addition to be in contact with the beer for two to three days, then remove.

Rack the beer, prime and bottle condition, or keg and force carbonate to 2.5 volumes. Do not filter or fine the beer.

Last Updated and Sharing
 
236
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2019-03-22 07:02 UTC