Actual PB Chocolate Stout - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Actual PB Chocolate Stout

255 calories 25.4 g 12 oz
brewer logo
Beer Stats
Method: All Grain
Style: Imperial Stout
Boil Time: 60 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 7 gallons
Post Boil Size: 5.5 gallons
Pre Boil Gravity: 1.061 (recipe based estimate)
Post Boil Gravity: 1.077 (recipe based estimate)
Efficiency: 80% (brew house)
Source: NB/BJM
Calories: 255 calories (Per 12oz)
Carbs: 25.4 g (Per 12oz)
Created: Wednesday February 27th 2019
Similar Recipes

Black Forest Cake Stout clone

by DeclineBeers

OG: 1.091 FG: 1.030 ABV: 7.9% IBU: 38

Breakfast Stout

by RxBeers

OG: 1.088 FG: 1.022 ABV: 8.6% IBU: 46

1.077
1.018
7.8%
44.9
45.5
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
11.75 lb American - Pale 2-Row11.75 lb Pale 2-Row 37 1.8 79%
1.63 lb American - Chocolate1.625 lb Chocolate 29 350 10.9%
0.50 lb American - Carapils (Dextrine Malt)0.5 lb Carapils (Dextrine Malt) 33 1.8 3.4%
0.50 lb American - Roasted Barley0.5 lb Roasted Barley 33 300 3.4%
0.50 lb American - Caramel / Crystal 120L0.5 lb Caramel / Crystal 120L 33 120 3.4%
14.87 lbs / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1 oz Chinook1 oz Chinook Hops Pellet 13 Boil 60 min 35.15 50%
0.50 oz Spalt0.5 oz Spalt Hops Pellet 4.5 Boil 60 min 6.08 25%
0.50 oz Spalt0.5 oz Spalt Hops Pellet 4.5 Boil 20 min 3.68 25%
2 oz / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
32 oz Cacao flakes Flavor Mash 0 min.
32 oz All Natural Peanut Butter Flavor Mash 0 min.
 
Yeast
Wyeast - American Ale 1056
Amount:
2 Each
Cost:
Attenuation (avg):
75%
Flocculation:
Med-Low
Optimum Temp:
60 - 72 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 136 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 1.9 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
27 qt Infusion -- 148 °F 60 min
Starting Mash Thickness: 1.5 qt/lb
Quick Water Requirements
Water Gallons  Quarts
Strike water volume at mash thickness of 1.5 qt/lb 5.58 22.3  
Mash volume with grains 6.77 27.1  
Grain absorption losses -1.86 -7.4  
Remaining sparge water volume (equipment estimates 3.61 g | 14.4 qt) 3.53 14.1  
Mash Lauter Tun losses -0.25 -1  
Pre boil volume (equipment estimates 7.08 g | 28.3 qt) 7 28  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.08 -0.3  
Post boil Volume 5.5 22  
Going into fermentor 5.5 22  
Total: 9.11 36.4
Equipment Profile Used: System Default
 
Notes

I hate the taste of PB2. I used actual peanut butter in the mash. Even though the mash filtered out some oil, there was definitely some in the boil since there was minimal foam. The transfer to the secondary and to the bottling bucket removed a lot of the oil to allow for carbonation; however, I used cacao flakes in my mash. I see why cacao is put in the secondary. It tasted like baker's chocolate after the boil. The peanut butter flavor was genuine though.

Last Updated and Sharing
 
289
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2019-08-31 18:59 UTC