Two Leaf Clover - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Two Leaf Clover

124 calories 12.6 g 12 oz
brewer logo
Beer Stats
Method: Extract
Style: Irish Stout
Boil Time: 60 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 3 gallons
Pre Boil Gravity: 1.063 (recipe based estimate)
Efficiency: 35% (steeping grains only)
Source: Brewcraft USA
Calories: 124 calories (Per 12oz)
Carbs: 12.6 g (Per 12oz)
Created: Sunday February 3rd 2019
1.038
1.009
3.7%
0.0
35.7
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
3 lb Dry Malt Extract - Pilsen3 lb Dry Malt Extract - Pilsen 42 2 52.2%
1 lb Dry Malt Extract - Dark1 lb Dry Malt Extract - Dark 44 30 17.4%
4 lbs / $ 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
0.75 lb American - Roasted Barley0.75 lb Roasted Barley 33 300 13%
0.25 lb American - Black Malt0.25 lb Black Malt 28 500 4.3%
0.25 lb American - Chocolate0.25 lb Chocolate 29 350 4.3%
0.50 lb American - Caramel / Crystal 75L0.5 lb Caramel / Crystal 75L 33 75 8.7%
$ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1 oz Cascade1 oz Cascade Hops Leaf/Whole 7 Boil at 212 °F 0 min 100%
1 oz / $ 0.00
 
Yeast
Danstar - Nottingham Ale Yeast
Amount:
1 Each
Cost:
Attenuation (avg):
77%
Flocculation:
High
Optimum Temp:
57 - 70 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 63 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
 
Target Water Profile
Distilled
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 6.45 g | 25.8 qt) 2.91 11.6  
Mash volume with grains (equipment estimates 6.45 g | 25.8 qt) 3.05 12.2  
Grain absorption losses (steeping) -0.22 -0.9  
Volume increase from sugar/extract (early additions) 0.31 1.2  
Pre boil volume (equipment estimates 6.54 g | 26.2 qt) 3 12  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.04 -0.2  
Post boil volume 5 20  
Going into fermentor 5 20  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 2.91 11.6
Equipment Profile Used: System Default
 
Notes

A pretty basic Dry Irish Stout, not much special about this one. Came from a Brewcraft USA kit.

Last Updated and Sharing
 
387
Views
1
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2019-02-03 21:22 UTC