Check Out My Stout - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Check Out My Stout

200 calories 22.8 g 12 oz
brewer logo
Beer Stats
Method: Extract
Style: American Stout
Boil Time: 60 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 2.5 gallons
Pre Boil Gravity: 1.119 (recipe based estimate)
Efficiency: 35% (steeping grains only)
Calories: 200 calories (Per 12oz)
Carbs: 22.8 g (Per 12oz)
Created: Wednesday November 7th 2018
1.060
1.018
5.5%
39.0
50.0
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
6 lb Dry Malt Extract - Dark6 lb Dry Malt Extract - Dark 44 30 66.7%
6 lbs / $ 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
1 lb United Kingdom - Golden Naked Oats1 lb Golden Naked Oats 33 10 11.1%
1 lb United Kingdom - Roasted Barley1 lb Roasted Barley 29 550 11.1%
1 lb United Kingdom - Chocolate1 lb Chocolate 34 425 11.1%
$ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
2 oz Northern Brewer2 oz Northern Brewer Hops Pellet 7.8 Boil 60 min 31.88 66.7%
1 oz Goldings1 oz Goldings Hops Pellet 4.5 Boil 30 min 7.07 33.3%
3 oz / $ 0.00
 
Yeast
Wyeast - Whitbread Ale 1099
Amount:
1 Each
Cost:
Attenuation (custom):
70%
Flocculation:
High
Optimum Temp:
64 - 75 °F
Starter:
No
Fermentation Temp:
66 °F
Pitch Rate:
0.35 (M cells / ml / ° P) 98 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 6.53 g | 26.1 qt) 2.42 9.7  
Mash volume with grains (equipment estimates 6.53 g | 26.1 qt) 2.66 10.6  
Grain absorption losses (steeping) -0.38 -1.5  
Volume increase from sugar/extract (early additions) 0.45 1.8  
Pre boil volume (equipment estimates 6.61 g | 26.5 qt) 2.5 10  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.11 -0.5  
Post boil volume 5 20  
Going into fermentor 5 20  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 2.42 9.7
Equipment Profile Used: System Default
 
Notes

the roasted barley is un-malted
the roasted barley and chocolate are Munton's
OG: 1.058
Fermentation (in my new Anvil SS fermenter) started around 64F then at day 2 went up to around 68F for a couple of days then dropped back down to 64F around day 4. At day 15 Ferm temp was 62F. Brought fermenter up from basement to 1st floor at 1 month, temp rose to 68F in about a day or 2. Kept at this temp until bottling day which was 5 days later from moving upstairs.

FG: 1.024
ABV: 4.8%

Primed with 3.2oz Dextrose (for around 2.0-2.2 vol. CO2) stored at 66F

My favorite beer brewed to date.

Last Updated and Sharing
 
200
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2019-04-23 18:52 UTC