Gabe's Hoppy Belgian "The Målleström" - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Gabe's Hoppy Belgian "The Målleström"

340 calories 27.6 g 12 oz
Beer Stats
Method: All Grain
Style: Belgian Tripel
Boil Time: 90 min
Batch Size: 5.75 gallons (fermentor volume)
Pre Boil Size: 7.5 gallons
Post Boil Size: 6 gallons
Pre Boil Gravity: 1.067 (recipe based estimate)
Post Boil Gravity: 1.103 (recipe based estimate)
Efficiency: 87% (brew house)
Calories: 340 calories (Per 12oz)
Carbs: 27.6 g (Per 12oz)
Created: Thursday November 1st 2018
1.103
1.016
11.5%
57.6
11.0
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
14 lb German - Floor-Malted Bohemian Pilsner14 lb Floor-Malted Bohemian Pilsner 38 1.8 78.9%
1 lb Belgian Candi Sugar - Amber/Brown (60L)1 lb Belgian Candi Sugar - Amber/Brown (60L) - (late boil kettle addition) 38 60 5.6%
2 lb Soft Candi Sugar - Blond2 lb Soft Candi Sugar - Blond - (late boil kettle addition) 38 5 11.3%
8 oz Aromatic Malt8 oz Aromatic Malt 35 20 2.8%
4 oz German - Acidulated Malt4 oz Acidulated Malt 27 3.4 1.4%
17.75 lbs / 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1 oz Hallertau Blanc1 oz Hallertau Blanc Hops Pellet 10 Boil 90 min 30.26 25%
1 oz Hallertau Blanc1 oz Hallertau Blanc Hops Pellet 10 Boil 11 min 11.07 25%
2 oz Mosaic2 oz Mosaic Hops Pellet 12.5 Whirlpool 15 min 16.28 50%
4 oz / 0.00
 
Yeast
Mangrove Jack - Belgian Tripel M31
Amount:
3 Each
Cost:
Attenuation (custom):
80%
Flocculation:
Medium
Optimum Temp:
64 - 82 °F
Starter:
Yes
Fermentation Temp:
-
Pitch Rate:
1.0 (M cells / ml / ° P) 532 B cells required
0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: dextrose       Amount: 5.8 oz       Temp: 68 °F       CO2 Level: 2.65 Volumes
 
Target Water Profile
Light colored and hoppy
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
75 5 10 50 150 0
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
4 gal Fly Sparge 175 °F 175 °F 30 min
4.37 gal Strike 165 °F 152 °F 60 min
Starting Mash Thickness: 1.25 qt/lb
Starting Grain Temp: 70 °F
Quick Water Requirements
Water Gallons  Quarts
Strike water volume at mash thickness of 1.25 qt/lb 4.61 18.4  
Mash volume with grains 5.79 23.2  
Grain absorption losses -1.84 -7.4  
Remaining sparge water volume (equipment estimates 5.39 g | 21.6 qt) 4.98 19.9  
Mash Lauter Tun losses -0.25 -1  
Pre boil volume (equipment estimates 7.9 g | 31.6 qt) 7.5 30  
Volume increase from sugar/extract (late additions) 0.25 1  
Boil off losses -2.25 -9  
Hops absorption losses (first wort, boil, aroma) -0.08 -0.3  
Post boil Volume (equipment estimates 5.83 g | 23.3 qt) 6 24  
Hops absorption losses (whirlpool, hop stand) -0.08 -0.3  
WARNING: Exceeded batch size - reduce boil size    
Going into fermentor (equipment estimates 5.93 g | 23.7 qt) 5.75 23  
Total: 9.59 38.4
Equipment Profile Used: System Default
 
Notes

This monstrosity was born out of a few things. I was not sure what efficiency my friend would get on his first all grain batch, and we wanted to do something Belgiany, boozy with a hoppy flair. So I over built the recipe thinking he would be in the 65% brew-house range. We didn't end up with 65, but north of the 85% efficiency and ended up with a 1.1 SG.

Next was my friends ability to buy the wrong ingredients, and inability to follow the recipe. We were going to use T-85 yeast, but that got subbed for M31. We were also going to use Perle and El Dorado hops, but that didn't happen. The aroma additions of Hallertau Blanc were supposed to be at 15,10,5, and 0 minutes in the boil, but a whole oz was added at 11 minutes.

This beer was brewed in a near constant howling downpour while we drank Westmalle Tripel, so the name of "Mallestrom" was born, and Nordic lettering was added the more we drank.

3 packs of M31 were pitched into a 2L starter, and left on the stir plate for about 36 hours to hopefully give us a pitch of about 500B yeastys. I suggested a blow off tube, but none was to be at at my friends house. I said I expected the airlock to blow off the carboy, but I had no idea of the carnage ahead. At 5am the next morning, I found the airlock had blown off and exploded to the ceiling. I cleaned out the airlock, and put it back on to find there was so much co2 coming out, that was no longer bubbling, but just held the bubbler at the top of the air lock. I made a quick and dirty blowoff tube using the tubing off the racking cane and the rubber bung. It bubbled through that tube with reckless abandon.

All in all, I cannot wait to try this beer.

Last Updated and Sharing
 
469
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2020-11-10 17:36 UTC